H3C SecPath M9000 Multi Service
A
Hangzhou H3C Technologies Co., Ltd.
http://www.h3c.com
Document version:
PW102-20140307
Security Gateway Series
Installation Guide
Copyright © 2013-2014, Hangzhou H3C Technologies Co., Ltd. and its licensors
All rights reserved
No part of this manual may be reproduced or transmitted in any form or by any means without prior
written consent of Hangzhou H3C Technologies Co., Ltd.
Trademarks
3
H3C, , H3CS, H3CIE, H3CNE, Aolynk, , H
Care, , IRF, NetPilot, Netflow,
SecEngine, SecPath, SecCenter, SecBlade, Comware, ITCMM and HUASAN are trademarks of
Hangzhou H3C Technologies Co., Ltd.
All other trademarks that may be mentioned in this manual are the property of their respective owners
Notice
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute the warranty of any kind, express or implied.
Environmental protection
This product has been designed to comply with the environmental protection requirements. The storage,
use, and disposal of this product must meet the applicable national laws and regulations.
Preface
The H3C SecPath M9000 Multi Service Security Gateway Series Installation Guide guides you through
the installation of your gateway, including installing the gateway, logging in to and configuring the
gateway, troubleshooting, and replacing FRUs.
This preface includes:
• Audience
• Conventions
• About the H3C SecPath M9000 documentation set
• Obtaining documentation
• Technical support
• Documentation feedback
Audience
This documentation is intended for:
• Network planners
• Field technical support and servicing engineers
• Network administrators working with the M9000 security gateway series
Conventions
This section describes the conventions used in this documentation set.
Command conventions
Convention Description
Boldface Bold text represents commands and keywords that you enter literally as shown.
Italic Italic text represents arguments that you replace with actual values.
[ ] Square brackets enclose syntax choices (keywords or arguments) that are optional.
{ x | y | ... }
[ x | y | ... ]
{ x | y | ... } *
Braces enclose a set of required syntax choices separated by vertical bars, from which
you select one.
Square brackets enclose a set of optional syntax choices separated by vertical bars, from
which you select one or none.
Asterisk marked braces enclose a set of required syntax choices separated by vertical
bars, from which you select at least one.
[ x | y | ... ] *
&<1-n>
Asterisk marked square brackets enclose optional syntax choices separated by vertical
bars, from which you select one choice, multiple choices, or none.
The argument or keyword and argument combination before the ampersand (&) sign can
be entered 1 to n times.
Convention Description
# A line that starts with a pound (#) sign is comments.
GUI conventions
Convention Description
Boldface
> Multi-level menus are separated by angle brackets. For example, File > Create > Folder.
Symbols
Convention Description
WARNING
CAUTION
IMPORTANT
NOTE
TIP
Network topology icons
Window names, button names, field names, and menu items are in Boldface. For
example, the New User window appears; click OK.
An alert that calls attention to important information that if not understood or followed can
result in personal injury.
An alert that calls attention to important information that if not understood or followed can
result in data loss, data corruption, or damage to hardware or software.
An alert that calls attention to essential information.
An alert that contains additional or supplementary information.
An alert that provides helpful information.
Represents a generic network device, such as a router, switch, or firewall.
Port numbering in examples
The port numbers in this document are for illustration only and might be unavailable on your device.
Represents a routing-capable device, such as a router or Layer 3 switch.
Represents a generic switch, such as a Layer 2 or Layer 3 switch, or a router that supports
Layer 2 forwarding and other Layer 2 features.
Represents a security product, such as a firewall, a UTM, or a load-balancing or security
card that is installed in a device.
Represents a security card, such as a firewall card, a load-balancing card, or a
NetStream card.
About the H3C SecPath M9000 documentation set
The H3C SecPath M9000 documentation set includes:
Category Documents
Compliance and safety
manual
Hardware specifications
and installation
Quick start
Installation guide
Card manuals Provides the hardware specifications of cards.
Obtaining documentation
You can access the most up-to-date H3C product documentation on the World Wide Web
at http://www.h3c.com
Click the links on the top navigation bar to obtain different categories of product documentation:
[Technical Support & Documents > Technical Documents]
upgrading, and software feature configuration and maintenance documentation.
[Products & Solutions]
.
—Provides information about products and technologies, as well as solutions.
Purposes
Provides regulatory information and the safety
instructions that must be followed during installation.
Guides you through initial installation to help you
quickly set up and use your device with the minimum
configuration.
Provides a complete guide to hardware installation
and hardware specifications.
—Provides hardware installation, software
[Technical Support & Documents > Software Download]
software version.
Technical support
service@h3c.com
http://www.h3c.com
Documentation feedback
You can e-mail your comments about product documentation to info@h3c.com.
We appreciate your comments.
—Provides the documentation released with the
Loading...