Gude V 1201 C Translation Of Original Operating Instructions
English – GB
Translation of original operating instructions
Battery Charger
#85077
V 1201 C
© Güde GmbH & Co. KG - Birkichstrasse 6 - D-74549 Wolpertshausen - Deutschland
2
4
2
3
1
1
8
9
6
7
5
2
4
10
3
4
1
2
5
3
9
GB
Please read carefully the following Operating Instructions before putting the appliance into operation
A.V. 2 Any reprints, even partial, are subject to approval. Technical changes reserved.
Illustrative pictures! Translation of original operating instructions.
Unit
Battery Charger V 1201 C
Professional charger for charging and high-rate charging
Starting system with remote control, mobile, big wheels
Equipment: Professional charger cable, pliers with
insulated handles, including reliable and failure-free
ammeter, polarity reversal protection, thermal protection,
additional fuse, charging timer, 12 charging current levels.
Delivery (pic. 1+2)
1. 2 wheels
2. 2 wheel covers
3. 2 pins
4. Axis
Product Description (pic. 3)
1. Charging current switch
2. Ammeter
3. Timer
4. +12V connection
5. Charging/starting switch
6. +24 V connection
7. Pole pliers +
8. Pole pliers -
9. Remote control
10. Start button
EC Declaration of Conformity
We,
Güde GmbH & Co. KG
Birkichstraße 6
74549 Wolpertshausen
Germany
hereby declare the conception and construction of the belowmentioned devices correspond - at the type of construction
being launched - to appropriate basic safety and hygienic
requirements of EC Directives.
In case of any change to devices not discussed with us
the Declaration expires.
Marking of devices: V 1201 C
product No: 85077
Appropriate EC Directives:
2004/108 EG
2006/95 EG
Harmonised standards used:
EN 55014-1: 2006
EN 55014-2/A2 :2008
EN 61000-3-2: 2006
EN 61000-3-3: 2008
EN 61000-3-11: 2000
EN 60335-2-29 : 2004
EN 60335-1: 2002
Certification body:
TÜV SÜD Product Service GmbH, Ridlerstrasse 65,
80339 München, Deutschland
Date/producer signature: 03.09.2010
Angaben zum Unterzeichner: Mr. Arnold,
executive officer
Technical Documentation: J. Buerkle FBL; QA
Guarantee
The guarantee solely covers inadequacies caused by material
defect or manufacturing defect.
Original payment voucher with the sales date needs to be
submitted for any claim in the guarantee period.
The guarantee does not cover any unauthorised use such as
appliance overloading, use of violence, damage as a result of
any unauthorised interference or caused by foreign items.
Failing to follow the operating and assembly instructions and
common wear are also not included in the guarantee.
General Safety Regulations
This instruction manual should be read carefully before the
initial use of the unit. If in doubt with regard to connection and
operation, contact the manufacturer (servicing department).
Observe the instructions below carefully to provide for a
high degree of safety:
Warning: Do not operate unless with current
protection (FI) fitted!
Caution!
• Keep your workplace clean and tidy. Messy
workplace and disorder on the table increase the risk of
accident and injury.
• Mind the conditions of the environment you work in.
Do not use electric tools in moist and wet surroundings.
Provide for sufficient lighting. Do not expose the electric
tools to the rain or high atmospheric moisture. Do not
switch on in an area containing inflammable liquids or
gases.
• Do not admit any strangers to the machine. Visitors
and bystanders, children and the sick in particular keep
at a sufficient distance from your workplace.
• Provide for safe storage of the tools. The tools that
are not in current need should be stored at a dry
unapproachable or an elevated place.
• Watch out for the cable. Do not pull the cable. To
unplug, always grasp at the plug. Keep the cable at a
safe distance from sources of heat, oil and sharp edges.
• Provide against unintentional switching. Always
make sure that the tool switch is in OFF position before
plugging in.
• When working outdoors, use special extension
cables. To work outdoors, special extension cables are
needed, mark in the appropriate way.
• Always remain concentrated. Mind what you are
doing. Use common sense. Do not use electrical tools
when feeling tired. .
• Watch out for damaged parts. Check out the unit
before use. Are some parts damaged? If the damage is
slight, reconsider whether the unit is able of perfect and
safe operation.
• Prevent any electrical shock. Avoid any contact of
your body with grounded articles, e.g. water piping,
heating radiators, stoves and fridges.
• Use approved parts only. For maintenance and
repairs, use genuine spare parts only. The spare parts
may be obtained from an authorised servicing centre.
• Warning! Use of accessories and additional parts other
than those recommended in the operating manual may
present a threat for persons and things.
• The appliance meets EN 61000-3-11 requirements and
is subject to special connection conditions. That means
that use on optionally selected connection points is
inadmissible.
Loading...