Gyswshh Winbox P1 APEX Instruction Manual

Winbox P1 APEX Instruction Manual

Content:

I Key Mapping Diagram

II Device Connection(wireless mode)

III Application Method of PS4 Console

IV Application Method of Switch Console

V Application Method of X1 Console

VI Instruction of Function Keys

VII COOV Manager of IOS / Android

VIII PC COOV Assistant

IX Automatic On-hook Function

X Double Function

XI More Functions

(DPI / Multiple-unit Mapping / Reduce Recoil)

XII Default Key and Mouse Configuration

XIII Firmware/Script Update

I Key diagram

: Home key is equal to the Home key of Joypad

①

: BT: Wireless pairing button

②

: H1：The Mapping Key

③

: H2：Combo Setting Key/Combination Setting Key

④

: Two-in-one Headset Interface

⑤

: Micro USB Interface (Connecting Console/power)

⑥

: USB Interface(Connecting mouse/Joypad and so forth)

⑦

: USB Interface(Connecting mouse/Joypad and so forth)

⑧

: USB Interface(Connecting mouse/Joypad and so forth)

⑨

: USB Interface(Connecting mouse/Joypad and so forth)

⑩

II Device Connection

Winbox P1 APEX exclusively supports three Wireless modes.

Wireless A Mode: P1 APEX wirelessly connects Console

Wireless B Mode: P1 APEX wirelessly connects IOS/Android APP(This
function starts automatically after power-on)

Wireless C Mode: P1 APEX wirelessly connects Bluetooth Joypad

The Joypad Matching Keys under Wireless C Mode:

A

、Disconnecting PS4 original Joypad bluetooth, the method: “ Setting -

III Application Method of PS4 Console

The factory default is USB cable mode:Connecting Keyboard, Mouse /
Joypad with PS4 Console

Peripheral Device - Bluetooth Device - Disconnecting the Joypad”(or applying

different PS4 account)

B.Inserting keyboard, mouse into the USB interface of Winbox P1 APEX.
C. Connecting the Winbox P1 APEX with PS4 USB interface by presented
special cable
D. After the indicator cycle flashing, waiting for 3 to 5 seconds and then
pressing the Home key on Winbox P1 APEX (some PS4 machines shall be
held for 1 second),After the Home button LED is always on, you can use the
mouse and keyboard to control the PS4 .

Note 1: The headset microphone function is only used in this USB cable
mode.
Note 2: only under the wire keyboard and mouse, the Wireless C Mode
functions could be ran. And the Joypad could be connected with P1
APEX wirelessly, as following method:

A. Disconnecting PS4 original Joypad bluetooth, the method: “Setting -

Peripheral Device - Bluetooth Device - Disconnecting the Joypad”(or applying

different PS4 account).
B. Connecting the Winbox P1 APEX with PS4 USB interface framework by
presented special cable
C. After the indicator cycle flashing, waiting for 3 to 5 seconds and
thenpressing the Home key on Winbox P1 APEX (some PS4 machines shall
be held for 1 second) . LED Lights of Home Key light.
D. Pressing the game Joypad bluetooth matching key and then press the P1
APEX BT key. After matching successfully, you could control the PS4 by
Joypad wirelessly. (Wireless C Mode)