SUMAKE PNEUMATIC TOOLS
Air Punch & Flange
ST-6652DA
SUMAKE INDUSTRIAL CO., LTD
4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91
Specification:
Capacity
1.2 mm
Punch Hole
Dia. 8 mm
Punch Stroke
4mm
Overall Length
10” (250 mm)
Air Inlet (PT)
1/4” (6.35 mm)
Air Hose (I.D.)
3/8” (10 mm)
Air Pressure
90 psi (6.3 bar)
Net Weight
2.53 lbs (1.15 kg)
Noise and Vibration:
Vibration
EN ISO 20643
Noise
EN ISO 15744
Remark
No Load:
3.97 m/s²
Sound Pressure Level
load: 70.6 dB(A)
Please always
wear ear
protector at
environment
noise level >
80 dB(A) due
to risk of
impaired
hearing!
Sound power level
load: 81.6 dB(A)
Uncertainty
K= 1.5 m/s²
Uncertainty
K= 3dB
ST-6652DA-S-2010C-D5F
EC DECLARATION OF CONFORMITY
We: SUMAKE INDUSTRIAL CO., LTD.
4F, No. 351, Yangguang St., Neihu District, Taipei City, Taiwan
declare in sole responsibility that the equipment
Equipment： AIR PUNCH & FLANGE
Model/ Serial No.：ST-6652DA
to which this declaration applies, complies with these normative documents:
Machinery Directive: 2006/42/EC
and conforms to the following EN standard,
EN ISO 12100: 2010
EN ISO 11148-10:2011
Name and Signature/Position Date and Place
2022/12/1
Mike Su – Managing Director Taipei, Taiwan
ST-6652DA-D-2303C-D5F
Foreword
h
n
h
Sum ake is a ma nufa ctur er and exp orte r of air to ol s
since estab lished. We ha ve devote all our effo rts in
improving quality and tools’ life. As well as the
noise and vibration of tools. Bring all of you
wo rk i ng effici ences, pr o f i t s, and enj oy using t h e tool
is our principle.
Features
This tool is designed to meet an extremely wide
range of metal board to be connected with each other
by first press the rim of each other and punching
holes, then connect these two board by ways of
inserting screw and bolt into the holes.
Opera tor‘s i nstructi on
1. Main Applications
This tool is perfect fo r comp ression and/or p unching
die of iron, steel, cast iron, aluminum, nonferrous
metal made thin board.
2. Cautions for Use
2-1 Air pressure
Maximum performance is displayed at the proper
sand ing sp eed , ob tain abl e at a gaug e pre ss ure of 6. 2
b ar. Ra ng e-wi se , t h is i s an air pr es su re f ro m 5 t o 7
bar ( 70 to 100 psi)
5
7
2-2 Air line
Use a 3/8“ air hose between the compressor and the
tool . Compressed air i s cooled and its water conten t
separated, as soon as the air leaves the comp ressor.
Recoil
hose
Water
separation
Air
supply
Tool
Leader
hose
Coupler
condensed in the piping, and can enter the tool
m echanism, and may c ause tr ouble. S o, instal l an air
filter and on oiler between the compressor and the
tool. Use a 3 HP or larger compressor for eac
sander.
2-3 Air ho se
Clean the hose with a blast o f compressed air b efor e
connecting the hose to air tool. This will prevent
both moisture and dust within the hose from entering
the tool and causing possible rust or malfunction. To
compensate for u nusually long h ose (over 25 f t), th e
line pre ssur e shoul d be increased ac cordingly.
D
r
a
i
n
a
g
e
2-4 Reg ular chec ks fo r cr acks and fiss ures in the
Anv i l , Clamb, Pun ch and P unchi ng Di e.
2-5 The appr oved eye pr otecto r, ear -mu ff, mouthmuf fle, an d gl oves sh ould be wo r n whe n op er a t e this
tool.
2-6 The working place shall be ventilative.
2-7 Rel e ase t he on -o ff dev i ce in t he case o f en er gy
supply failure.
2-8
Keep hands away from the compressio
mechanism and it is better hold this tool by bot
hands.
3. Operation, Adjusting And Replacing
Method
3.1 On- off de v ice
To operate this tool, just push the lever toward the
tool itself. The Clamb mov e to the Anvil while push
the lever and move in the op posit e direc tion wh ile
release the lever. This tool operates once for one
sing l e push-release cyc l e.
3.2 Replace and adjusting
There is no user serviceable part inside this tool.
Please send the tool to a qualified personnel or our
service section to repaire or/and replace worn parts.
4. Maintenance
4-1 Lubrication
Be fore co nnecti ng the ho se , a pply 4 o r 5 dro ps of
#60 spindle oil at the air inlet. A pp ly Use of a thicker
oil can lead to reduced performance or m alfunction .
If a thicker oil is used by accident, wipe it away
im med iate ly. Also, e very 3 or 4 ho urs of o pera tion ,
oili ng is necess ary. When neces sary, the too l has to
be refilled with high quality hydraulic oil, like Shell
Teilus Oil C - 10.
4-2 Storage
Avoid storing the tool in a location subject to high
humidity . If the tool is left as it is used , the residual
moisture inside the tool can c ause rust. Before storing
and after operation, oil the tool at the air inlet with
spindle oil and run it f or a short time.
4-3 Disposal
If the tool is too seriously damaged to be used
anymore, drop it in a re source recycling can. Never
drop it into fire.
4-4 Ord er in g serv i c e Part s
Fo r furthe r operat ional an d handlin g info rm ation or
for replacement of parts a nd components, contact the
sale a gent f ro m who m yo u purc hased the t o ol o r the
ser v i ce divi sio n of our compa n y.
*
In or deri ng par ts a nd com ponents , gi ve each part
number, name and quantity.
Warning
1.
This tool is not insulted for coming into contact
with electric power source.
2.
It is forbidden to use this tool in explosive
atm ospher es and do not pu t any combus tible mate r i al
near the workpiece since it emit spark s when grind
with metal material.
3. Prevent long hair or loo se clothing from drawing
in w hile operate this tool.
4. Never carry the tool by hose and beware of a
whipping compressed air hos e.
Nipple
Oiler
Regulator
Drain
daily
A portion of the water content, however, is
For the sake of safety, put it on hanger or on a soft
flat pad when not i n use.
ST-6652D(DA)(DS)-I-1707B-D5
ST-6652D, ST-6652DA, ST-6652DS
AIR PUNCH & FLANGE
PARTS LIST
No. Parts No. Description Q'ty No. Parts No. Description Q'ty
1 6652D-01 Set Screw (M6x6) 1 17 6652D-17 O-Ring 1
3
4
5
6
7
8
9 6652D-09 Screw (M4x6) 2 6652D-30B Air Inlet (NPT18) 1
10
11 6652D-11 Oil Seal 1 33 6652D-33 Push Rod 1
12 6652D-12 Hydr Cylinder 1 34 6652D-34 Spring 1
13 6652D-13 O-Ring (ID5.8x1.9) 1 35 6652D-35 Valve 1
14 6652D-14 Pan Head Screw (M6x10) 1 36 6652D-36 Spring 1
15 6652D-15 Support Ring 1 37 6652D-37 Screw 1
16 6652D-16 O-Ring (ID11.89x2.4) 2 38 6652D-38 Rubber Band 1
6652D-03 Clamp [ST-6652D, ST-6652DS] 1 18 6652D-18 Support Ring 1
6652DA-03 Clamp [ST-6652DA] 1 19 6652D-19 Piston 1
6652D-04 Punch Die [ST-6652D] 1 20 6652D-20 O-Ring (ID7.8x1.9) 2
6652DA-04 Punch Die [ST-6652DA] 1 21 6652D-21 Support Ring 2
6652DS-04 Punch Die [ST-6652DS] 1 22 6652D-22 Spring 1
6652D-05
6652DA-05 Guide Bushing [ST-6652DA] 1 24 6652D-24 High Press Piston 1
6652D-06
6652DA-06 Cup Spring [ST-6652DA] 13 26 6652D-26 Rubber Grip 1
6652D-07 Punch [ST-6652D, ST-6652DS] 1 27 6652D-27 O-Ring (ID47.35x1.78) 1
6652DA-07 Punch [ST-6652DA] 1 28 6652D-28 Lever 1
6652D-08 Anvil [ST-6652D, ST-6652DS] 1 29 6652D-29 Spring Pin (Φ3x23) 1
6652DA-08 Anvil [ST-6652DA] 1 6652D-30A Air Inlet (PT19) 1
6652D-10
6652DA-10 Cover Plate [ST-6652DA] 1 32 6652D-32 O-Ring (ID3.8x1.9) 1
Guide Bushing [ST-6652D, ST-6652DS]
Cup Spring [ST-6652D, ST-6652DS]
Cover Plate [ST-6652D, ST-6652DS]
1 23 6652D-23 O-Ring 1
13 25 6652D-25 Air Cylinder 1
30
1 31 6652D-31 Valve Body 1
ST-6652D(DA)(DS)-P-1707B-D5
Loading...