![](/html/5f/5ff9/5ff991252f12ed2832ab246a7f2ca38018428f8457e4d753becd0c28e5849d15/bg1.png)
BATTERY
CHARGER
GYSFLASH 102.12
12 V
Ref. 029606
Specically designed to be tted on a wall or on a car lift, the vertical GYSFLASH 102.12 is a very
powerful inverter battery charger able to supply up to 100A.. The GYSFLASH 102.12 will keep the
battery’s voltage perfectly stable at 12V during the diagnostic phases. It will deliver the best charging
cycle recommended for the maintenance of the most advanced vehicles on the market.
5 DIFFERENT MODES TO USE
• Charge : for 12V batteries
• Diag + : support up to 100 A the 12V batteries for vehicles in diagnostic phase.
• Battery change : ensures a stabilised power supply to the vehicle during battery
replacement to preserve memory settings.
• Power Supply : adapt the charger in stabilised power supply with voltage and
adjustable maximum current.
• Showroom : the charger will compensate the current used by the consumers in use on
the vehicle.
(lead-acid/AGM/gel)
from 20 to 1200 Ah.
ADVANCED FUNCTIONS
• The «Auto Restart» function means that the charger will memorise the
settings in case of a power cut and restart automatically.
• Control and calibration of cables, the charger can be tted with cables
up to 2x8m long and 16mm² thick.
• Locked in Showroom mode, avoid the risks of misuse, perfect for
garages and exhibition spaces.
• 4 charging curves available, whose the Easy mode for a simplied
charge adapted to all lead acid batteries.
• Activation and set-up of an «Expert» charging curve.
Supplied with :
Clamps
(2 x 5 m
16 mm2)
100% AUTOMATIC CHARGE
• The 9 step charging curve ensures maximum battery performance and longevity.
• It can recover deeply discharged batteries below >2 V
(SOS automatic Recovery).
ULTRA SAFE
• Protection of the vehicle’s on-board electronics: protection against short
circuits, polarity reversal and overcharging. Anti-spark technology.
• Interchangeable fusible which protect against misuse.
• Temperature sensor to prevent internal electronics overheating.
• Automatic stand-by mode if the battery is disconnected.
ERGONOMIC
• Compact and robust box with front cable reel (2 x 5 m).
• Pads for shock and vibration absorption.
• Optional wall mount with sliding system or magnetic (Magnetx).
ACCESSORIES
MagnetFix Support
029637
2 x 8 m - 16 mm²
056572
Wall mount
Intuitive interface
available in 19 languages
IP67
Carry case
060432
50 / 60 Hz
220-240 V AC 1600 W
FR
- EN 60335-2-29
Icharge
100 A 12 V 20 < 1200 Ah
V
Charge
<0.05 Ah/
month
Ondulation/
<150 mV
Charging
Ripple
Rms
curve
IU0I0U 9 step 66 A 75 A
40°C
@100%
25°C
@100%
kg
5.8
mm
295 x 117
x 345
Automatic
>2V
IP
IP 21 125 A
2.5 m
MADE in FRANCE
www.gys.fr