Gymwatch GW1000 User Manual
LED MODES NAVIGATIONCONNECTING YOUR SENSORS
Start / Stop SET
Next exercise
Activate speech input
Conrm input
Reactivate speech input
Switch the device o
Click
Click
Hold 2 sek
Hold 2 sek
Hold 5 sek
Click Click
Start / Stop SET
Next exercise
Activate speech input
Conrm input
Reactivate speech input
Switch the device o
Prevent children and animals from inserting the device into their mouth.
Do not poke this device against eyes, ears or other bodyparts.
Since the device contains a bright LED, do not use it in the direct vicinity to eyes of
humans and animals.
In case of skin irritations or allergic reactions, stop using the device and consult your
dermatologist.
CAUTION The device may only be open by the manufacturer! In case of improper
opening of the case, the battery might be damaged and explode.
Start / Stop SET
Next Exercise
Exercise Information
Activate speech input
Conrm input
Reactivate speech input
Shut down/disconnect
In order to switch the sensor on, press the Sensor Button once. The Smart Light will
glow in a bright white and constantly get darker until one minute is over.
Click
One minute is the time frame for connectivity of the sensor.
As soon as you’re connected to your smartphone, the Smart Light will pulsate colored in
constant intervals :
The color will be assigned to the sensor by the App automatically. That way it’s easy to
distinguish up to two dierent sensors (Sensor Duo) from each other and their specic
places on your body.
Shortly before you start your exercise and aer you pressed on “START” the Smart Light
shows you a trac light signal:
You have at least 3 sec to go into starting position. As soon as you are ready and hold
still, the light will turn green and tracking begins. You can also get feedback through
vibration of your phone and audio signals over headphones.
During your exercise the Smart Light will pulsate in the rhythm of your motion.
That way you can be sure it won’t miss any of your repetitions.
In case of a warning message or any occuring error, the Smart Light will pulse red.
Have a look at your smartphone screen and get detailed information.
If you wish to connect two sensors to your smartphone or tablet, both sensors
need to be turned on. Let the App assign one certain color to each of the
sensors. That way it’s easy to distinguish the position of every sensor.
5
NOTICE FOR USING BLUETOOTH SAFETY INFORMATION
CAUTION GYMWATCH Sensor doesn‘t prevent you from physical injury.
In order to avoid connection problems between the GYMWATCH® Sensor with a
mobile device, place both devices close to each other.
Make sure both devices are within the maximum bluetooth range of 10m.
Also ensure there is no barrier between the GYMWATCH® Sensor and your receiving
device (Smartphone, tablet ...) including persons, walls, corners or fences.
-
Use charging devices, accessories and supplies recommended by the manufacturer only!
The Sensor must not be exposed to heavy vibration and brute forces.
Avoid any contact of the hardware with conducting elements, such as metals and uids
Do not store the device in extremely hot or extremely cold environment.
The recommended range of temperature is between 5°C and 35°C (41°F and 95°F)
Never expose the sensor to direct sunlight, especially over a longer period of time.
It could overheat and be damaged.
Do not store the device close to heaters, microwaves, kitchen equipment or highpressure containers.
Click
Click Click
Click Click
Click Click Click
Hold 2 sek
c
Hold 2 sek
Click
Click
Hold 2 sek
c
Hold 2 sek
Hold 5 sek
Hold 10 sec
Hold 10 sek
6 7
Prevent children and animals from inserting the device into their mouth.
Do not poke this device against eyes, ears or other bodyparts.
Since the device contains a bright LED, do not use it in the direct vicinity to eyes of
humans and animals.
In case of skin irritations or allergic reactions, stop using the device and consult your
dermatologist.
CAUTION The device may only be opened by the manufacturer! In case of improper
CAUTION The device may only be open by the manufacturer! In case of improper
opening of the case, the battery might be damaged and can explode.
opening of the case, the battery might be damaged and explode.
Avoid high volume, when using headphones over a longer period of
Avoid high volume, when using headphones over a longer period of
time, to prevent hearing damage.
time, to prevent hearing damage.
Do not touch the device and its charging cable with moist hands during the charging
process
WASTE ELECTRICAL & ELECTRONIC EQUIPMENT
Don’t use the product outdoors during heavy rain and thunderstorm.
Switch the device o in explosive environments.
Pay attention to all security guidelines regarding the usage of mobile devices while
driving a vehicle.
If the product is damaged, broken or gets very hot, stop using it immediately and send
it back to GYMWATCH® for inspection.
WASTE ELECTRICAL & ELECTRONIC EQUIPMENT
This marking on the product, accessories or literature indicates that the
This marking on the product, accessories or literature indicates that the
product and its electronic accessories (e.g. USB cable) should not be disposed
product and its electronic accessories (e.g. USB cable) should not be disposed
of with other household waste. This EEE is compliant with RoHS.
of with other household waste. This EEE is compliant with RoHS.
8 9 10
Loading...