POWER SUPPLIES
PROGRAMMABLE SWITCHING D.C. POWER SUPPLY
The PSH-Series are single output from 360 to 1080W, programmable switching DC power supplies.
OVP, OCP and OTP protect the power supply and loads from unexpected conditions. Remote sensing
adds an extra level of precision by compensating cable losses between loads. The bright LCD with
simultaneous parameter outputs allows effortless operation. Self-test and software calibration features
also reduce maintenance overheads. SCPI commands and LabVIEW driver access through the RS-232C
or the optional GPIB interface allow remote control and ATE software development capability. Modular
architecture, dedicated rear-panel output, and the 19 inch 4U rack mounting option ensure that the
PSH-Series is optimized for large systems.
SPECIFICATIONS
PSH-Series
FEATURES
* Wide Input Voltage Range and High Power
Factor (P.F)
* High Efficiency and High Power Density
* Constant Voltage and Constant Current
Operation
* Over Voltage , Over Current and
Over Temperature Protection
* Self-Test and Software Calibration
* Output ON/OFF Control
* Low Ripple and Noise
* LCD Display
* Built-in Buzzer Alarm
* Standard Interface : RS-232C
* Optional Interface : GPIB ( IEEE-488.2 )
* LabVIEW Driver
Front Panel
Rear Panel
OUTPUT
10V
20V
36V
60V
REGULATION ( CV )
Load
Line
REGULATION ( CC )
Load
Line
RIPPLE & NOISE
Voltage (mVrms)
Voltage (mVp-p)
Current (mArms)
RESOLUTION
Voltage
Current
PROGRAM ACCURACY
Voltage
Current
READBACK ( Meter ) RESOLUTION
Voltage Same as Resolution Same as Resolution As Resolution
Current
READBACK ( Meter ) ACCURACY
Voltage Same as Program Accuracy Same as Program Accuracy As Program Accuracy
Current
READBACK TEMP. COEFFICIENT
Voltage (25 5 )
RESPONSE ( Rise/Fall ) TIME
Voltage Up(10%~90%)
Voltage Down(90%~10%)
RECOVERY TIME ( 50% Step Load Change From 25%~75% )
CV Mode 2mS 2mS 2mS
PROTECTION
OVP/OCP/OTP
Rush Current
OUTPUT ON/OFF CONTROL
INTERFACE
Standard : RS-232C; Optional : GPIB
POWER SOURCE
AC90V~250V, 50/60Hz
DIMENSIONS & WEIGHT
36V 10mV
>36V 20mV
10V
20V
36V
60V
36V
>36V
10V
20V
36V
60V
36A(PSH-1036A) 70A(PSH-1070A) 100A(PSH-10100A)
18A(PSH-2018A) 35A(PSH-2035A) 50A(PSH-2050A)
10A(PSH-3610A) 20A(PSH-3620A) 30A(PSH-3630A)
6A(PSH-6006A) 12A(PSH-6012A) 18A(PSH-6018A)
10mA 20mA 30mA
10mA 10mA 20mA
10mA 10mA 10mA
10mA 10mA 10mA
Same as Resolution Same as Resolution As Resolution
Same as Program Accuracy Same as Program Accuracy As Program Accuracy
100ppm/ C 100ppm/ C 100ppm/ C
108(W)x142(H)x393(D)mm 188(W)x142(H)x393(D)mm 268(W)x142(H)x393(D)mm
Approx. 3.3kg Approx. 6.2kg Approx. 9.3kg
0.1%+5mV 0.1%+5mV 0.1%+5mV
0.05%+5mV 0.05%+5mV 0.05%+5mV
0.2%+5mA 0.2%+10mA 0.2%+15mA
0.2%+5mA 0.2%+10mA 0.2%+15mA
10mVrms 10mVrms 10mVrms
100mVp-p 20Hz~20MHz
0.2% 0.2%+20mA 0.2%+40mA
0.05%+25mV 0.05%+25mV 0.05%+25mV
0.05%+50mV 0.05%+50mV 0.05%+50mV
0.2%+30mA 0.2%+60mA 0.2%+90mA
0.2%+30mA 0.2%+30mA 0.2%+60mA
0.2%+30mA 0.2%+30mA 0.2%+30mA
0.2%+30mA 0.2%+30mA 0.2%+30mA
150mS( 95% rating load)
150mS( 10% rating load)
100mVp-p 20Hz~20MHz
10mV
20mV
150mS( 95% rating load)
150mS( 10% rating load)
100mVp-p 20Hz~20MHz
10mV
20mV
150mS( 95% rating load)
150mS( 10% rating load)
D23
PSH-1036A
PSH-1070A
PSH-10100A
PSH-2018A
PSH-2035A
PSH-2050A
ACCESSORIES :
User manual x 1 , Power cord x 1
OPTION
Opt. 01:
360W Programmable Switching D.C. Power Supply
700W Programmable Switching D.C. Power Supply
1000W Programmable Switching D.C. Power Supply
360W Programmable Switching D.C. Power Supply
700W Programmable Switching D.C. Power Supply
1000W Programmable Switching D.C. Power Supply
GPIB Interface ( Factory Installed)
ORDERING INFORMATION
PSH-3610A
PSH-3620A
PSH-3630A
PSH-6006A
PSH-6012A
PSH-6018A
360W Programmable Switching D.C. Power Supply
720W Programmable Switching D.C. Power Supply
1080W Programmable Switching D.C. Power Supply
360W Programmable Switching D.C. Power Supply
720W Programmable Switching D.C. Power Supply
1080W Programmable Switching D.C. Power Supply
OPTIONAL ACCESSORIES
GRA-403 Rack Adapter Panel
GTL-232 RS232C Cable, 9-pin Female to 9-pin, null Modem for Computer
FREE DOWNLOAD
PC Software
Driver
NOTE : When Opt.01 GPIB interface is ordered, the standard interface RS-232C will be deleted.
PC Software including Data Log ; Remote Control Software
Labview Driver