Instruction Manual
18.5” (47cm)
HD LED LCD TV COMBO
/ GVALEDC19J
2
Contents
Preface 4
Safety Precautions 4
Important Safety Instructions 7
In the Carton 10
Connections and Functions 11
Basic Installation 12
Remote Control 16
Remote Control Setup 20
Basic Operation 21
Picture Menu 22
Sound Menu 25
Channel Menu 28
Lock Menu 33
Hotel Mode 35
Setup Menu 36
HDMI CEC Control 38
PVR and Time Shift Operation 39
PVR Setting 39
First Time Setup 39
Reset 39
USB Device Setup 40
Timeshift 41
Instant Recording 42
Time Recorder 42
Playlist 43
EPG (Electronic Program Guide) 44
ATV / HDMI / AV / YPbPr / PC 45
Multi Media Menu Operation 46
Photo 46
Music 47
Movie 47
Text 48
3
Contents
DVD Function 49
Specications 52
Wall Mounting Instructions 53
Care and Maintenance 54
FAQs 55
4
Preface
Thank you for building this TV! Please read this manual thoroughly before operating the TV.
Make sure the TV was not damaged in transit. Should the TV is damaged, do not install it and
contact your dealer. Check that you have all the accessories according to the model.
Safety Precautions
1. PREFACE
Thank you for buying this TV ! Please read this manual throughly before operating the TV.
Make sure the TV was not damaged in transit. Should the TV is damaged, do not install
your dealer. Check that you have all the accessories according to the model.
it and contact
2. SAFETY PRECAUTIONS
Put the TV on a stable surface.
Do not place any material on the TV.
Do not block or cover the ventilation openings on the TV.
If you have a wall mount, check that it is steady.
Do not use the with fixtures other than those provided or
suggested by the manufacturer.
TV
Put the TV on a stable surface.
Do not place any material on the TV.
Do not use the TV with xtures other than those provided or
suggested by the manufacturer.
Do not block or cover the ventilation openings on the TV. If
you have a wall mount, check that it is steady.
5
Power cord and cables must be properly routed and protected
to prevent people from stepping on them and causing the TV
to fall.
Keep the TV dry and away from humidity.
Keep the TV away from heat sources.
Unplug the TV before cleaning it. Do not use solvent or
liquid to clean the TV. Once Clean the TV with soft and dry
cloth.
Safety Precautions (Cont.)
2. SAFETY PRECAUTIONS
Power cord and cables must be properly routed and protected to prevent
people from stepping on them and causing the TV to fall.
Put the TV on a stable surface.
Do not place any material on the TV.
Do not block or cover the ventilation openings on the TV.
If you have a wall mount, check that it is steady.
Do not use the with fixtures other than those provided or
suggested by the manufacturer.
TV
Keep the TV dry and away from humidity.
Keep the TV away from heat sources
.
Unplug the before cleaning it. Do not use solvent or liquidTV to clean
the TV.
Only clean the TV with a soft and dry cloth.
6
In cause of troubleshooting, do not use spare parts
other than those suggested by the manufacturer. Using
inadequate spare parts can lead to electric shocks, shortcircuits re or other incidents.
Unplug the TV during lightening storms or when unused for
long periods of time.
Safety Precautions (Cont.)
Keep the TV dry and away from humidity.
Keep the TV away from heat sources
.
Unplug the before cleaning it. Do not use solvent or liquidTV to clean
the TV.
Only clean the TV with a soft and dry cloth.
In case of troubleshooting, do not use spare parts other than those
suggested by the manufacturer. Using inadequate spare parts can
shocks, short-circuits fire or other incidents.lead to electric
Unplug the TV during lightening storms or when unused for long periods
of time.
4
7
Important Safety Instructions
Read this manual thoroughly before rst use and keep it in a safe place for future reference,
along with the warranty card, purchase receipt and carton. The safety precautions enclosed
herein reduce the risk of re, electric shock and injury when correctly adhered to.
Usage conditions and restrictions
To prevent any injuries, the following safety precautions should be observed in the
installation, use, servicing and maintenance of equipment. Before operating this equipment,
please read this manual completely, and keep it nearby for future reference.
• Take notice of all the warnings.
• Do not use this TV near water.
• Clean only with a dry cloth.
• Do not block any of the ventilation openings.
• Install in accordance with the manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other TV’s
(including ampliers) that produce heat.
• Do not alter the grounding type plug provided with the TV. A grounding type plug has two
blades and a third grounding prong. The third prong is provided for your safety. When the
provided plug does not t into your outlet, consult an electrician for replacement of the
obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the TV.
• Only use the attachments/accessories specied by the manufacturer.
• Use only with a cart, stand, tripod, bracket, or table specied by the manufacturer, or sold
with the TV.
• Unplug this TV during lightning storms or when unused for long periods of time.
• The appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible
for their safety.
• Young children should be supervised to ensure they do not play with the appliance.
• Refer all servicing to qualied service personnel. Servicing is required when the TV has been
damaged in any way, such as power supply cord or plug is damaged, liquid has been spilt
or objects have fallen into the TV, the TV has been exposed to rain or moisture, does not
operate normally, or has been dropped.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualied persons in order to avoid a hazard.
NOTE: The TV must not be exposed to dripping or splashing and no objects lled with
liquids, such as vases, should be placed on the TV.
8
Important Safety Instructions
Position
• If a television is not positioned in a suciently stable location, it can be potentially
hazardous due to falling. Many injuries, particularly to children, can be avoided by taking
simple precautions such as:
• Securely attaching the TV to the wall mount fastened on the wall.
• Only using furniture that can safely support the television.
• Ensuring the television is not overhanging the edge of the supporting furniture.
• Educating children about the dangers of climbing on furniture to reach the TV controls.
• Not standing the TV on cloth or other materials placed between the television and
supporting furniture.
• Not placing the television on tall furniture (for example, cupboards or bookcases)
without anchoring both the furniture and the television to a suitable support.
• When deciding on where to put the TV set, make sure the place is:
• Well ventilated.
• Away from damp and cold.
• Protected from overheating and away from direct sunlight.
• Away from moisture drips or splashes.
• Protected from excessive dust.
• Do not install this equipment in a conned space such as a bookcase or similar unit.
• Do not put any objects lled with liquids, such as vases, on top of the TV set.
• Do not place any naked ame sources, such as lighted candles, on top of the TV set.
Cleaning and maintenance
• Dust the TV set by wiping the screen and cabinet with a soft, clean cloth.
Electrical safety, power cord and plug
• Before installing this TV set, make sure your outlet voltage corresponds to the voltage
stated on the appliance rating label.
• To reduce the risk of re or electric shock, do not expose this appliance to rain or moisture.
• Do not overload the power cord or power outlet.
• Do not let the cord hang over the edge of a table or counter, or touch any hot surface.
• Do not allow anything to rest on or roll over the power cord and signal cable.
• Protect the power cord and signal cable from being trampled.
• Do not expose the power cord and signal cable to moisture.
9
Important Safety Instructions
• Do not apply excessive force to the screen when cleaning.
• Do not clean the screen with water or chemical cleaners as this may damage the LED
screen surface.
• Do not dismantle this product by yourself, as this may cause damage. There are no userserviceable parts contained in the TV set.
• If your TV set has been damaged, contact the after sales support line for advice or take
it to a local service centre for inspection or repair. No liability can be accepted for any
damage caused by non-compliance with these instructions or any other improper use or
mishandling of appliance.
TV with Class 1 construction shall be connected to a main socket outlet with a protective
earthing connection.
WARNING:
TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR AN ELECTRIC SHOCK HAZARD, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTIONS: • These servicing instructions are for use by qualied service personnel only. To
reduce the risk of electric shock, do not perform any servicing other than that
contained in the operating instructions unless you are qualied to do so.
• Any changes or modications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This symbol indicates that dangerous voltage constituting a risk of
electric shock is present within this unit.
This symbol indicates that there are important operating and
maintenance instructions in the documentation accompanying this unit.
CAUTION: TO PREVENT THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
10
In the Carton
11
Connections and Functions
1. DC IN: Main power input.
2. Headphone: Connect the earphone.
3. VGA: Connect to a PC’s PC-RGB output socket.
4. PC Audio: Connect to a PC’s Audio output socket.
5. RF: Connection for the antenna plug.
6. HDMI: Connect to the HDMI output socket of a
DVD player.
7. USB: Connect to portable USB storage device.
8. YPbPr: Connect to the (Component) output socket
of a DVD Player.
9. Coax: Connect to an external digital audio device.
10. Video: Connect to a DVD player’s VIDEO output
socket.
11. R/L: Connect the R/L AUDIO output socket of DVD.
Front and Back Connection of LED TV
Back View and Control Connections
11
Insert the disc with
the label side
facing yourself
11
Insert the disc with
the label side
facing yourself
1. Press “STANDBY” button to turn
standby mode on or o.
2. Press “SOURCE” to select the
input source.
3. Press “MENU” to bring up the
main menu on the screen.
4. Press “CH+” or “CH-” to scan
through channels.
5. Press “VOL+” or “VOL-” to increase
or decrease the volume.
6. POWER INDICATOR: Show red
in standby mode, show green
when your TV is switched on.
7. REMOTE SENSOR: Infrared sensor
for the remote control.
8. Play / Pause program.
9. Load / eject DVD disc.
12
Basic Installation
Power Cord Connection
- Connect the power cord correctly as shown.
- Press the STANDBY switch of your LED TV to switch the unit on. The power indicator on the
front panel lights up in green.
Antennas Connection
To ensure good picture and sound, TV antenna system needs to be installed. The antenna
system as shown can be sourced from TV equipment shops, which will provide service for
correct installation and connections. After installation, insert the 75-OHM antenna plug into
the antenna socket as shown.
12
Basic Installation
Power Cord Connection
- Connect the power cord and power adaptor correctly as shown.
- Press the STANDBY switch of your LED TV to switch the unit on. The power indicator on the
front panel lights up in green or blue.
Antennas Connection
To ensure good picture and sound, a TV antenna system needs to be installed. The antenna
system as shown can be sourced from TV equipment shops, which will provide service for
correct installation and connections. After installation, insert the 75-OHM antenna plug into
the antenna socket as shown.
13
YPbPr Connection
Connect the YPbPr output of the DVD or VCR to the YPbPr input on the TV. The picture quality
is improved compared to connecting a regular VCR to the video input. Connect the Audio
output of the DVD or VCR to the Audio input socket on the set using the RCA cable. Match
the sockets’ colours: Y is green, Pb is blue, Pr is red. Audio left is white and Audio right in red.
Select YPbPr input source using the SOURCE button on the remote control.
Basic Installation (Cont.)
AV Connection
Connect the VIDEO and AUDIO output socket of the DVD or VCR to the AV IN socket on the
set using the RCA cable (Yellow [video],White and Red [left and right audio]). Select the AV
input source using the SOURCE button on the remote control.
13
13
YPbPr Connection
Connect the YPbPr output of the DVD or VCR to the YPbPr input on the TV.The picture quality
is improved compared to connecting a regular VCR to the video input. Connect the Audio
output of the DVD or VCR to the Audio input sockets on the set using the RCA cable
(3.5mm plug-2 X RCA plug). Match the sockets colours: Y is green, Pb is blue, Pr is red. Audio
left is white and Audio right in red. Select YPbP input source using the SOURCE button on the
remote control.
Basic Installation (Cont.)
AV Connection
Connect the VIDEO and AUDIO output sockets of the DVD or VCR to the AV IN sockets on the
TV using the RCA cable (Yellow [video],White and Red [left and right audio]). Select the AV
input source using the SOURCE button on the remote control.
14
Basic Installation (Cont.)
VGA (PC) Connection
Connect the RGB output of the PC to the VGA socket on the set. Connect the AUDIO output
of the PC to the PC AUDIO socket on the set. Select the PC input source using the SOURCE
button the remote control.
HDMI Connection
HDMI connection allows the user to transfer both audio and video control signals through
one cable only. These signals are transferred in digital.
USBRF HDMI
PC
Audio
VGA
Y Pb Pr
DC IN
Head
phone
USBRF H DMI
PC
Audio
VGA
Y Pb Pr
DC IN
Head
phone
USBRF H DMI
PC
Audio
VGA
Y Pb Pr
DC IN
Head
phone
15
Basic Installation (Cont.)
Coax Connection
Connect the Coaxial output of the TV to the Coaxial (S/PDIF) input on the amplifier. Your
amplifier must have the corresponding decoding functions to decode the signal coming
from the TV.
15
Video
R LCoax
USB Connection
A portable USB device can be connected to the USB socket.
15
Video
R LCoax
USBRF HDMI
PC
Audio
VGA
Y Pb Pr
DC IN
Head
phone
16
Remote Control
Remote control instruction TV mode
STANDBY: Press to turn the TV set on or off.
SOURCE: Press to cycle through the input source.
PMODE: Select picture mode.
SMODE: Select sound mode.
AUDIO: Select different audio modes.
SLEEP: Set the TV to sleep.
MUTE: Press to mute the sound. Press again or press V+ to
unmute the TV.
0-9: TV channel number select.
-/-- : Press this button to enter a program number for multiple
program channel such as 2-1,etc.
: Return to the previous channel viewed.
FAV: Display your favourite channel list.
MENU: Brings up the main menu to the screen.
EXIT: Exit the main TV menu to the screen.
DISPLAY: Press to display the source and channel’s
information.
/ / / /OK : Allows you to move, select and setup the
OSD options.
VOL+/-: Press to increase/decrease the sound level.
CH+/-: Press to scan through channels.
STANDBY:
SOURCE: Press to cycle through the input source.
PMODE: Select picture mode.
SMODE: Select sound mode.
AUDIO:
SLEEP: Sets the TV sleep time.
MUTE: Press to mute the sound. Press again or press
0-9: TV channel number select.
: Return to the previous channel viewed.
FAV: Display your favourite channel list.
MENU: Brings up the main menu to the screen.
EXIT: Press to close the on-screen display.
DISPLAY: Press to display the source and channel’s
information.
/ / / /OK : Allows you to move, select and setup
the OSD options.
VOL+/-: Volume up/down.
CH+/-: Channel up/down.
16
Remote Control
Remote control instruction TV mode
-/-- : Press this button to enter a program number
for multiple program channel such as 2-1,etc.
GVALEDC19J
V+ to un-mute the TV.
LANG
17
Remote Control (Cont.)
Remote control instruction in TELETEXT mode
NUMBER BUTTONS: Press 0-9 to select a teletext page.
TEXT: Press to switch between TV and Teletext mode.
COLOUR BUTTONS: Select for Preferred TELETEXT page.
HOLD: Freeze the current page.
SIZE: Change the picture size.
SUBTITLE: To display subtitle.
INDEX: Request index page when index link is valid.
FREEZE: Reveal or hide the hidden words.
ZOOM: Press this button to select the default screen size
on your TV.
* Teletext or Austext is no longer available, nor is there
any plan for a replacement teletext service in Australia.
For more information, please visit the websites of the
Australian channel providers. However, one teletext
option, “closed captions”, is still working on most
Australian television channels. This service allows you
to activate subtitles while watching normal television
programs that provide it.
NUMBER BUTTONE: Press 0-9 to select a teletext page.
TEXT: Press to switch between TV and Teletext mode.
COLOUR BUTTONS: Select 4 preferred teletext pages.
HOLD: Freeze the current page.
SIZE: Change the picture size.
SUBTITLE: Displays subtitles.
INDEX: Request index page when index is valid.
* Teletext or Austext is no longer available, nor is
there any plan for a replacement teletext service
in Australia. For more information, please visit
the websites of the Australian channel providers.
However, one teletext option,“closed captions”, is
still working on most Australian television channels.
This service allows you to activate subtitles while
watching normal television programs that provide it.
GVALEDC19J
17
Remote Control (Cont.)
Remote control instruction in TELETEXT mode
FREEZE: Reveal or hide the hidden words.
ZOOM: Press this button to select the default screen size
on your TV.
LANG
18
Remote Control (Cont.)
Remote control instruction in DTV mode
NUMBER BUTTONS: Press 0-9 to select a channel.
FAV: Press to display your favourite channel list.
MENU: Brings up the main DTV menu to the screen.
DISPLAY: Press display the source and channel’s information.
/ / / /OK : Allows you to move, select and setup the
OSD option.
CH+/-: Channel up/down.
COLOUR BUTTONS: Used in a few sub-menus.
SUBTITLE: To display subtitle.
: PLAY/PAUSE in TIMESHIFT and MEDIA mode.
: Stop in MEDIA mode or exit the REC mode.
/ : Fast reverse and forward key in MEDIA mode.
/ : Jump to previous and next track in MEDIA mode.
SIZE: Change the picture format.
EPG: Lanuches the EPG ( Electronic Program Guide).
MEDIA: Press to select MEDIA mode.
TV/Radio: Select TV or Radio modes.
(REC): Record the program in DTV mode.
STANDBY:
SOURCE: Press to cycle through the input source.
PMODE: Select picture mode.
SMODE: Select sound mode.
AUDIO:
SLEEP: Sets the TV sleep time.
MUTE: Press to mute the sound. Press again or press
0-9: TV channel number select.
: Return to the previous channel viewed.
FAV: Display your favourite channel list.
MENU: Brings up the main menu to the screen.
EXIT: Press to close the on-screen display.
DISPLAY: Press to display the source and channel’s
information.
/ / / /OK : Allows you to move, select and setup
the OSD options.
VOL+/-: Volume up/down.
CH+/-: Channel up/down.
16
Remote Control
Remote control instruction TV mode
-/-- : Press this button to enter a program number
for multiple program channel such as 2-1,etc.
GVALEDC19J
V+ to un-mute the TV.
LANG
19
Remote Control (Cont.)
Remote control instruction in DVD mode
: Press to eject the disc.
NUMBER BUTTONS: Press 0-9 to select the DVD Chapter.
DISPLAY: Press to display the DVD information on DVD.
D.SETUP: Press to access DVD setup menu.
/ / / /OK : Allows you to move, select and setup
the DVD option.
GOTO: Press to access the GOTO menu.
A-B: This button enables you to repeat a selected section
from the disc.
REPEAT: Press PEPEAT to cycle through the repeat play
options.
SUBTITLE: To display subtitle.
TITLE: When DVD is playing, brings up the Title Menu.
D.MENU: Access to DVD disc menu.
AUDIO: AUDIO selection buttons in DVD mode.
: PLAY/PAUSE in DVD mode.
: Stop DVD playing.
/ : Fast reverse and forward key in DVD mode.
/ : Jump to previous and next track/chapter in DVD
mode.
NUMBER BUTTONE: Press 0-9 to select a teletext page.
TEXT: Press to switch between TV and Teletext mode.
COLOUR BUTTONS: Select 4 preferred teletext pages.
HOLD: Freeze the current page.
SIZE: Change the picture size.
SUBTITLE: Displays subtitles.
INDEX: Request index page when index is valid.
* Teletext or Austext is no longer available, nor is
there any plan for a replacement teletext service
in Australia. For more information, please visit
the websites of the Australian channel providers.
However, one teletext option,“closed captions”, is
still working on most Australian television channels.
This service allows you to activate subtitles while
watching normal television programs that provide it.
GVALEDC19J
17
Remote Control (Cont.)
Remote control instruction in TELETEXT mode
FREEZE: Reveal or hide the hidden words.
ZOOM: Press this button to select the default screen size
on your TV.
LANG
20
Remote Control Setup
1. Open the cover.
2. Your remote requires 2X AAA Batteries. When inserting the batteries, make sure correct
polarity marks”+”and “-” on the batteries match the diagram as shown within the battery
compartment.
3. Replace the battery cover.
To prevent battery leakage which may result in bodily injury or damage to the remote:
1. Install all batteries correctly, and as marked on the remote control.
2. Do not mix batteries: (OLD and NEW or CARBON and ALKALINE, etc) Remove batteries
when the remote is not used for a long time.
3. Recommend using ALKALINE type batteries.
polarity marks”+”and“-” on the batteries match the diagram as shown within the battery
compartment.
when the remote is not used for a long time.
21
Basic Operation
Selecting Input Source
21
DVD
Basic Operation
Press SOURCE button on the remote control to display the input source list.
Press / button to select the input source you want to watch.
Press OK button to enter the input source.
Press EXIT button to quit.
22
Basic Operation (Cont.)
Picture Menu
Press MENU button to display the main menu.
Press / button to select PICTURE in the main menu, it will highlight the first operation.
1. Press / button to select the option that you want to adjust in the PICTURE menu.
2. Press / button to adjust.
3. After finishing your adjustment, press MENU button to return back to the previous
menu.
Picture Mode
Press / button to select Picture Mode, then press OK button to enter sub-menu.
Press / button to select. (Available Picture mode: Dynamic, Standard, Mild, Personal).
You can change the value of contrast, brightness, color and sharpness when the picture is
in Personal mode. TIPS: You can press PMODE button on the remote control to change the
Picture Mode directly.
Brightness
Press / button to select Brightness, then press OK button to enter sub-menu. Press /
button to adjust.
Contrast
Press / button to select Contrast, then press OK button to enter sub-menu. Press /
button to adjust.
22
Basic Operation (Cont.)
Picture Menu
Press MENU button to display the main menu.
Press / button to select PICTURE in the main menu, it will highligh
ration
Auto
Cool
23
Sharpness
Press / button to select Sharpness, then press / button to adjust.
Saturation
Adjust the saturation of the color based on your own preference.
Hue
Use in compensating colour changed with the transmission in the NTSC system.
Colour Temp
Press / button to select Color Temperature, then press / button to select. (Available
Color Temperature: Normal, Cool, Warm).
Aspect Ratio
Press / button to select Aspect Ratio, then press / button to select. (Available Aspect
Ratio: Auto, Zoom1, Zoom2, 4:3, 16:9).
Basic Operation (Cont.)
24
Advanced Settings
NR(Noise Reduction)
Press / button to select NR(Noise Reduction), then press / button to select.
(Available options: O, Weak, Medium, Strong).
MPEG NR(Noise Reduction)
Press / button to select MPEG NR(Noise Reduction), then press / button to
select. (Available options: O, Weak, Medium, Strong).
Dynamic Contrast
Press / button to select Dynamic Contrast, then press / button to select.
(Available options: O, Weak, Medium, Strong).
Basic Operation (Cont.)
Medium
25
Basic Operation (Cont.)
Sound Menu
Press MENU button to display the main menu.
Press / button to select SOUND in the main menu, it will highlight the first option.
25
PCM
1. Press / button to select the option that you want to adjust in the SOUND menu.
2. Press / button to adjust.
3. After finishing your adjustment, press MENU button to return back to the previous
menu.
Sound Mode
Press / button to select Sound Mode, then press OK button to enter sub-menu.
Press / button to select. (Available Sound mode: Standard, Music, Movie, Personal).
You can change the value of Treble and Bass when the sound is in Personal mode.
TIPS: You can press SMODE button on the remote control to change the Sound Mode directly.
Treble
Press / button to select Treble, then press OK button to enter sub-menu. Press /
button to adjust.
Bass
Press / button to select Bass, then press OK button to enter sub-menu. Press / button
to adjust.
26
Basic Operation (Cont.)
Balance
Press / button to select Balance, then press OK button to enter sub-menu. Press /
button to adjust.
Surround Sound
Press / button to select Surround Sound, then press / button to select On or Off.
EQ Setting
Press / button to select EQ Setting, then press OK / button to enter submenu.
AVL (Auto Volume Level)
Press / button to select AVL, then press Press / button to select On or O.
S/PDIF
Press / button to select S/PDIF, then press Press / button to select O, Auto, PCM.
Audio Description
Press / button to select Audio Description, then press OK / button to enter submenu.
27
Basic Operation (Cont.)
Audio Description
Press / button to select Audio Description, then press / button to select.
27
Sound Type
Press / button to select Sound Type, then press / button to select sound type
options (Available sound type: Stereo, Dual l, Dual II, Mixed).
28
Basic Operation (Cont.)
Channel Menu
Press MENU button to display the main menu.
Press / button to select CHANNEL in the main menu, it will highlight the rst option.
1. Press / button to select the option that you want to adjust in the CHANNEL menu.
2. Press / button to adjust.
3. After nishing your adjustment, press MENU button to return back to the previous
menu.
Auto Scan
Press / button to select Auto Scan, then press Ok / button to enter submenu. (The
default password is 0000)
Australia
Country
29
Basic Operation (Cont.)
Manual Scan
Press / button to select Manual Scan, then press Ok / button to enter submenu.
Digital Manual Scan
Press / button to select Digital Manual Scan, then press Ok / button to enter submenu.
30
Basic Operation (Cont.)
Analog Manual Scan
Press / button to select Analog Manual Scan, then press Ok / button to enter
submenu.
31
Basic Operation (Cont.)
Channel Edit
Press / button to select Channel Edit, then press Ok / button to enter submenu.
31
The three colored keys are the shortcut keys for programming the channel
list.
First press / to highlight the channel you want to delete or move or skip, then:
Press the Red button to delete the channel.
Press the Green button to skip the select channel.
(Your TV set will skip the channel automatically when using CH+/- to view the channels.)
Press the Blue button to set the channel to moving state, then press / to move it to the
position you want to put, then press the blue button again to conrm the position.
32
Basic Operation (Cont.)
Signal Information
Press / button to select Signal Information, then press Ok / button to select the
detailed information about the signal. Only available when there is signal under DTV.
33
Basic Operation (Cont.)
Lock Menu
Press MENU button to display the main menu.
Press / button to select LOCK in the main menu, it will highlight the first option.
33
No Block
1. Press / button to select the option that you want to adjust in the LOCK menu.
(Default Password: 0000)
2. Press / button to adjust.
3. After finishing your adjustment, press MENU button to return back to the previous
menu.
Enter Password
Press / button to select Enter Password, then press OK button to make the following 4
options valid. (Default password is ‘0000’.)
Enable
Press / button to select Enable, then press Press / button to select On or Off.
Channel Locks, Parental Rating and Lock Keypad are available when Enable is On.
Channel Locks
Press / button to select Channel Locks, then press Ok / button to enter submenu.
34
Basic Operation (Cont.)
Parental Rating
Press / button to select Parental Rating, then press / button to select.
Lock Keypad
Set to prevent it from being used by young children, or other unexpected usage.
Press / button to select Lock Keypad, then press / button to select On or Off.
35
Basic Operation (Cont.)
Hotel Mode
Press / button to select Hotel Mode, then press Ok / button to enter submenu.
35
button to enter submenu.
New Password
Press / button to select New Password, then enter a 4 digit number you want to set as
password. Repeat 4 digit number to confirm new password.
Clear Lock
Press / button to select Clear Lock, then press / button to select.
NOTE: The default password is “0000” (Administrator password is “4711”).
36
Basic Operation (Cont.)
Setup Menu
Press MENU button to display the main menu.
Press / button to select SETUP in the main menu, it will highlight the rst option.
Blue Screen Off
HDMI CEC Control
PVR Settings
OSD Language
Press / button to select OSD Language, then press OK button to enter submenu.
Press / / / button to select OSD language.
Auto Language
Press / button to select Auto Language, then press Ok button to enter submenu.
Press / / / button to select the Audio Primary Language and Audio Secondary
Language.
Blue Screen Off
HDMI CEC Control
PVR Settings
37
Subtitle
Press / button to select Subtitle, then press Ok button to enter submenu.
Teletext
Adjust Teletext settings. Only available under DTV and ATV source.
Press / button to select Teletext, then press Ok / button to enter submenu.
Under DTV source, press / button to select Digital Teletext Language.
Under ATV source, press / button to select Decoding Page Language.
Blue Screen
Press / button to select Blue Screen, then Press / button to select On or Off.
Time Setting
Press / button to select Time Setting, then press Ok button to enter submenu.
Basic Operation (Cont.)
37
/ button to select Digital Teletext Language.
/ button to select Decoding Page Language.
/
37
37
Subtitle
Press / button to select Subtitle, then press OK button to enter submenu.
Teletext
Adjust Teletext settings. Only available under DTV and ATV source.
Press / button to select Teletext, then press OK / button to enter submenu.
Basic Operation (Cont.)
38
Basic Operation (Cont.)
HDMI CEC Control
Press / button to select HDMI CEC Control, then press OK button to enter submenu.
37
HDMI CEC Control
Press / button to select HDMI CEC Control, then press / button to select ON to make
the following 3 options valid.
ARC (Audio Return Channel)
Press / button to select ARC, then press / button to select On or O.
CEC Menu Control
Press / button to select CEC Menu Control, then press OK / button to enter submenu.
Home Menu
When selecting this, TV will show the Home Menu of connected CEC equipment.
Option
When selecting this, TV will show the Option menu of connected CEC equipment.
Content
When selecting this, TV will show the Disc menu of connected CEC equipment.
Device List
Press / button to select Device List, then press OK / button to enter submenu. This
menu shows all the CEC devices that’s connected with the TV. Users can refresh the CEC
device list by access this menu, or choose a CEC device from the list.
39
PVR Setting
Press / button to select PVR SETTING, then press Ok button to enter submenu. It will
check the USB.
First Time Setup
Press / button to select First Time Setup, then press Ok button to enter. (Default
Password is 0000).
Reset
Press / button to select Reset,
then press Ok button to enter.
Select “Yes” if you are sure to reset.
Software Update (USB)
Use / the button to select this
option, then press OK button to
update software using USB.
PVR and Timeshift Operation
40
PVR and Timeshift Operation (Cont.)
USB Device Setup
Before use the Recording and Timeshift functions, you should insert a USB device and format
it in the USB Host port at the connection panel of the TV set.
IMPORTANT: The setup will format the USB device, therefore all the data stored in the device
will be lost. We strongly recommend to save the content of your USB device to your PC
before starting configuration.
Press MENU button to access the PVR SETTINGS menu under the SETUP submenu. Use the
/ button and then press OK button to select and access the DEVICE LIST interface.
Follow the next steps to format the USB device:
Use / button to select the disk partition that you wish to use for Recording and Timeshift
functions, and then press the RED button to start formatting the selected partition.
39
Wait until the process ends and then press the EXIT button to exit the settings menu. The USB
device will be ready to start using the Recording and Timeshift functions.
41
PVR and Timeshift Operation (Cont.)
Timeshift
Using Timeshift function you will be able to pause a live broadcast and move backwards and
forwards in the TV transmission.
To start the Timeshift function press PLAY/PAUSE button on the remote control. The image
will freeze and the buer will start to store information. The available buer time will depend
on the quality of the broadcasting and the free space on the USB device.
Press PLAY button to start viewing the programme from the point it was paused, and use the
remote keys assigned to playback mode to perform playing functions such as fast forward,
rewind, pause, etc.
When watching a TV program in Timeshift mode, the following information will be displayed
on the screen:
40
PVR and Timeshift Operation (Cont.)
Timeshift
Using Timeshift function you will be able to pause a live broadcast and move backwards and
forwards in the TV transmission.
To start the Timeshift function press TIMESHIFT button on the remote control. The image will
the quality of the broadcasting and the free space on the USB device.
Press PLAY button to start viewing the programme from the point it was paused, and use the
remote keys assigned to playback mode to perform playing functions as fast forward, rewind,
pause, etc.
When watching a TV program in Timeshift mode, the following information will be displayed
on the screen:
00:03:46
Play
FB FF Prev. Next Stop
Available Time
00:55:27 / 01:00:35
00:06:48
The progress bar, on top of the information window, shows in blue color the elapsed time,
and in white color the remaining program time stored. The current playing time and the total
time stored are displayed at the right side of the progress bar. The total buer available time
is displayed below.
To nish Timeshift function, press STOP button, or just switch to another channel.
42
PVR and Timeshift Operation (Cont.)
Instant Recording
Using Recording function you will be able to record from the DTV input.
To start the Recording function press REC button on the remote control and the unit will start
recording the current programme. The following information will be displayed at the left
upper side of the screen:
41
In this interface, the time already recorded and the total recording time available in the USB
disk are displayed. To finish Recording function, press STOP button, or just switch to another
channel.
Timer Recorder
Press the REC button to schedule the recording of the programme selected at the EPG
programmes list. Follow the on-screen instructions to choose the recording frequency, vary
the channel and adjust the start and end date and time if you wish. Press the MENU button to
return to the previous window, or press the EXIT button to leave the interface.
41
Recording function, press STOP button, or just
43
PVR and Timeshift Operation (Cont.)
Playlist
Press MENU button to access the PVR SETTINGS menu under the SETUP submenu, from this
menu you may play the recorded TV programs, as well as access the scheduled recordings
list.
/ buttons to choose the File Manager and press OK and press to access. Follow the
Press / buttons to choose the File Manager and press OK to access. Follow the on-screen
instructions to play the TV programs stored. Press the MENU button to return to the previous
window, or press the EXIT button to leave the interface.
Press / buttons to choose the Scheduled Record and press OK to access. Use the /
buttons to choose a group and follow the on-screen instructions to schedule a recording.
Press the MENU button to return to the previous window, or press the EXIT button to leave
the interface.
44
EPG (Electronic Program Guide)
EPG Function -Electronic Programme Guide
Lets you check information about broadcasting programmes on the screen (schedules,
programmes, contents description...) as well as schedule recordings and reminders.
Press EPG button in the remote control unit, and the following interface will be displayed at
the screen:
43
Press the BLUE button to schedule a reminder for the programme selected at the
programmes list. Some seconds before the beginning of the programme, on the screen will
be displayed a message advising that the channel is near to be switched.
Follow the on-screen instructions to choose the reminding frequency, vary the channel,
adjust the start / end date and time if you wish. Press the OK button to return to the previous
window, or press the EXIT button to leave the interface.
Press the REC button to schedule the recording of the programme selected at the
programmes list.
Follow the on-screen instructions to choose the recording frequency, vary the channel, adjust
the start / end date and time if you wish. Press the MENU button to return to the previous
window, or press the EXIT button to leave the interface.
45
ATV / HDMI / AV / YPbPr / PC
1. PC Setting in PICTURE menu is available in PC Input only. Screen Mode in PICTURE menu
and HDMI CEC Control in SETUP menu is available in HDMI Input only.
2. Audio Description and Sound Type in AUDIO menu is valid only in DTV mode.
3. HDMI/AV/YPbPr/PC mode has no CHANNEL menu.
4. Parental Rating and Channel Locks in PARENTAL CONTROL menu is invalid for HDMI/
AV/YPbPr mode. Parental Rating is invalid for ATV mode. PC mode has no PARENTAL
CONTROL menu.
5. Audio Languages, Subtitle and PVR Settings in SETUP option are invalid for AV/PC mode.
Audio Languages, Subtitle, Teletext PVR Settings in SETUP option are invalid for HDMI/
YPbPr mode.
46
Multi-Media Menu Operation
Before operating USB menu, plug in USB device, then press SOURCE button to set the Input
Source to USB. Press / button to select USB in the Source menu, then press Ok button to
enter.
45
Press / button to select the option you want to adjust in the main USB manu, then press
Ok button to enter.
Photo
Press / button to select PHOTO in the main menu, then press OK button to enter.
Press / button to select drive disk you want to watch, then press OK button to enter.
Press / button to select folder or le you want to watch, then press OK button to conrm.
Press Exit button to go back to the previous menu.
45
/ button to select PHOTO in the main menu, then press OK button to enter.
47
Multi-Media Menu Operation (Cont.)
Music
Press / button to select MUSIC in the main menu, then press OK button to enter.
Press / button to select drive disk you want to watch, then press OK button to enter.
Press / button to select folder or le you want to watch, then press OK button to conrm.
Press Exit button to go back to the previous menu.
When highlighting the option you select, the file information will appear on the right.
Movie
Press / button to select MOVIE in the main menu, then press OK button to enter.
Press / button to select drive disk you want to watch, then press OK button to enter.
Press / button to select folder or le you want to watch, then press OK button to conrm.
Press Exit button to go back to the previous menu.
45
45
48
Multi-Media Menu Operation (Cont.)
Text
Press / button to select TEXT in the main menu, then press OK button to enter.
Press / button to select drive disk you want to watch, then press OK button to enter.
Press / button to select folder or le you want to watch, then press OK button to conrm. Press
Exit button to go back to the previous menu.
47
When highlighting the option you select, the file information will appear on the right.
47
49
DVD Function
General Setup Page
Press the D.SETUP button and then press the / button to display the system setup menu
page when in DVD mode.
Press / button to move the highlight to select the following option.
Press the button to enter the following menu and use the / button to select a menu
item.
Press the OK button to conrm.
Press button to go back to the previous menu level.
Press the D.SETUP to exit the DVD setup menu.
50
DVD Function (Cont.)
Audio Setup Page
Press the D.SETUP button and then press / to display the audio menu page when in DVD
mode.
Press / button to move the highlighted to select the following option.
Press button to enter the following menu and use the / button to select a menu item.
Press the OK button to conrm.
Press button to go back to the previous menu level.
Press the D.SETUP to exit the DVD setup menu.
49
Preference Page
Press the D.SETUP button and then press / button to display the preference page when in DVD
mode.
Press / button to move the highlight to select the following option.
Press button to enter the following menu and use / button to select a menu item.
Press the OK button to conrm.
Press button to go back to the previous menu level.
Press the D.SETUP to exit the DVD setup menu.
51
DVD Function (Cont.)
(The default password is 0000.)
(The administrator password is 4711.)
PAL
Multi
NTSC
52
Specications
MODEL GVALEDC19J
Panel System 18.5” (47cm) HD LED panel
Display Resolution 1366 x 768
Television System PAL
Aspect Ratio 16:9
Display Colours 16.7M Colours
Contrast 1000:1
Viewing Angle 170 (H) / 160 (V)
Backlight Life 50,000 hours
Pixel Pitch 0.3 (H) x 0.3 (V)
Response Time 5ms
HDMI Input 1
Speaker consumption L/R 2x3W
Voltage DC12V 3A
Rated Power consumption 20W
This manual is only for your reference, any change to the design and specification will not be
advised.
53
Attaching the base
Place the screen face down on a protective surface. Place the stand on the neck of the TV
and insert metal disc and tighten the screws (found in the accessories box) in the circled area
with the screw drive provided.
Remove the Stand
To remove the stand, remove the screws in the circled area and the neck will come off.
.
Wall-mounting the Device
If you are mounting the device, please consult
a qualified installer for further instructions on
bracket support and wall support.
Mount Specification: 100 mm x 100 mm using
screw size M4 (not supplied). Length of screw
should not exceed 10 mm.
Please note: The 10 mm length of screw refers to
how deep the screw can go inside the mounting
holes.
When you are buying screws, you should add the original 10mm to the thickness of your
mounting plate in order to get the total screw length.
Wall Mounting Instructions
.
54
Care and Maintenance
Maintaining your TV
If you clean your TV carefully and regularly, it helps your TV to last longer. Make sure you turn
the power off and unplug the power cord on your TV before you begin to clean it.
Cleaning the screen
1. Here’s a great way to keep the dust o your screen. Wet a soft cloth in a mixture of
lukewarm water and a small amount of fabric softener or washing-up liquid. Wring the
cloth until it’s almost dry and then use it to wipe the screen.
2. Make sure there is no excess water on your TV when you have nished cleaning it.
Cleaning the plastic parts of your TV
Wipe the plastic parts of your TV with a soft, dry, lint-free cloth. Do not use a wet cloth.
If you are going to be away for a while
If you are not going to use your TV for a while (such as when you go on holiday),
you should unplug the power cord from the socket and disconnect your aerial to
protect your TV against possible damage from lightning or power surges.
If you're having problems
Note: This page only refer to Video Graphics adaptor (VGA) problems.
-Change the resolution, horizontal or vertical frequency of your source(PC etc.).
-Check whether the signal cable is connected from the PC to your TV properly.
-Check the signal input source is connected properly.
There is a vertical bar or stripe on my TV screen.
-Turn on the auto configure or change the horizontal or vertical frequency position.
Screen colours aren't appearing as they should be or single colour.
-Check if the video signal cable is connected properly.
-Reinstall your PC video card if the signal source is from your computer.
Maintaining your TV
If you clean your TV carefully and regularly, it helps your TV to last longer. Make sure
you turn the power off and unplug the power cord on your TV before you begin to
clean it.
Cleaning the screen
1.Here's a great way to keep the dust off your screen. Wet a soft cloth in a mixture of
lukewarm water and a small amount of fabric softener or washing-up liquid. Wring
the cloth until it's almost dry and then use it to wipe the screen.
2
.Make sure there is no excess water on your TV when you have finished cleaning it.
Cleaning the plastic parts of your TV
Wipe the plastic parts of your TV with a soft, dry, lint-free cloth. Do not use a wet cloth.
If you are going to be away for a while
If you are not going to use your TV for a while (such as when you go on
holiday), you should unplug the power cord from the socket and disconnect
Problems and how to fix them
The signal is out of range.
55
FAQs
Problem Action
No picture, no sound 1. Check that you have connected the TV power
cord properly and switched the wall socket on.
2. Check that you have turned on the POWER
button on your TV.
3. Check the picture contrast and brightness
setting.
Normal Picture, but no sound 1. Check that your TV is not muted or has the
volume down.
2. Switch the channel, the problem may be with
the channel you’re on, not the TV.
3. Check that your audio cable input has been
plugged in properly, if you are using an external
amplifier.
Remote control does not work 1. Check to see if there is any object between your
TV (such as a piece of furniture) that could block
the remote control from connecting with the
sensor on your TV.
2. Have you put the batteries into the remote
control the right way? ( + to + and - to -)
3. Check that the TV is not positioned in bright
sunlight.
4. Try fitting new batteries if none of the above
work.
TV turned off suddenly 1. Check that you have not set the sleep timer.
2. Check that you have not set the timer to control
the socket which has your TV power cord on.
3. Check that you have not set auto standby with the
broadcast signal source which is connected to your
TV.
Picture appear slowly after
TV switched on
This is normal. The image takes a few seconds to
appear after you have switched the TV on. Please
contact your service centre if picture has not
appeared after five minutes.
56
FAQs
Problem Action
No Colour, poor quality colour,
poor quality image
1. Change the colour setting on the PICTURE MENU.
2. Keep a distance between your TV and any VCR you
may be using
3. Try watching another channel. The problem may
be with the channel you’re watching.
4. Are the video cables installed properly?
5. Change the setting of picture brightness on
PICTURE MENU.
6. Reinstall your PC video card if the signal source is
from your computer.
Horizontal and Vertical lines on
the screen in PC mode
1. Check if any signal interference activities is going
on nearby, such as an electrical appliance or power
tool is in operation.
2. Turn on the auto configure or change the
horizontal or vertical frequency position.
Poor reception 1. The TV channel you’re watching may be having
problems. Change to another channel and see if
the same is happening.
2. TV broadcasting signal is weak or has been
interrupted.
3. Check whether signal sources have any possible
interference.
Lines and streaks on the picture Check if there is any damage to the aerial on the roof, try
to change the direction of the aerial to receive a better
signal.
TV Speak has no sound Check the sound balance setting on SOUND MENU.
The signal is out of range 1. Change the resolution,horizontal or vertical
frequency of your source (PC etc.).
2. Check whether the signal cable is connected from
the PC to your TV properly.
3. Check the signal input source is connected
properly.
57
Notes
58
Notes
59
Notes
Loading...