How it Works
GVA
Loading...
GVA22GLEDC
Instruction Manual
49 pgs3.12 Mb0

GVA GVA22GLEDC, GVA22GLED Instruction Manual

Download
INSTRUCTION MANUAL
GVA22GLEDC
21.5” (54.6cm) FHD LED TV
with Built-in DVD Player
CONTENTS
CONTENTS
4
IMPORTANT SAFETY INSTRUCTIONS
Safety information
CAUTION:
Dvd/video cd/cd player is a class 1 laser product. However this Dvd/video cd/cd player uses a visible laser beam which could Cause hazardous radiation exposure if directed. Be sure to Operate the dvd/video cd/cd player correctly as instructed. When this dvd/video cd/cd player is plugged to the wall outlet, do Not place your eyes close to the opening of the disc tray and Other openings to look into the inside of this player. Use of controls or adjustments or performance of procedures Other than those specied herein may result in hazardous Radiation exposure. Do not open covers and repair yourself. Refer servicing to Qualied personnel.
WARNING:
- To prevent re or shock hazard. Do not use this power cord with An extension cord, receptacle or other outlet unless the blades Can be fully inserted to prevent blade exposure.
- To prevent re or shock hazard. Do not expose this appliance to Rain or moisture.
CAUTION - laser radiation when open, do not stare into beam. Ventilation warning - the normal ventilation of the product shall Not be impeded for intended use.
Always follow basic safety precautions when using electrical products, especially when children are present. WARNING: To avoid the risk of electrical shock, make sure the product is unplugged from the electrical outlet before relocating, servicing, or cleaning it.
5
IMPORTANT SAFETY INSTRUCTIONS
Read all instructions before using
• Do not use this product near water.
• Install the product in accordance with the operating instructions.
• Connect this product to the power outlet which has protective earth connection.
• Do not set the product near heat sources, such as radiators, heat registers, stoves, or other apparatus (including ampliers) that produce heat.
• Protect the power cord from being walked on or pinched, particularly at plugs,convenience receptacles, and the point where they exit the product.
• Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
• Unplug the product during lightning storms or when unused for long periods of time.
• The product shall not be exposed to dripping or splashing and that no objects lled with liquids, such as vases, shall be placed on the product.
• Do not place in or expose the product to direct sunlight, extreme heat, humid or dusty locations.
• Never operate this product if it has a damaged power cord or plug, do not work properly, has been dropped, damaged, or exposed to moisture, water, or other liquids.
• Do not attempt to examine or repair this product yourself; take the product to a service center for inspection and repair.
• Keep magnetic objects such as speakers, at a distance from the player.
• Connect this product to the power outlet which has protective earth connection.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modications. Such modications could void the user’s authority to operate the equipment.
• Operate turning controls and switches as instructed in the manual.
• Before turning on the power for the rst time, make sure that the power plug is properly installed.
• Store your discs in a cool area to avoid damage from heat.
6
IMPORTANT SAFETY INSTRUCTIONS
Battery Handling and Usage
• Keep batteries away from children and pets. Only adults should handle batteries.
• Never throw batteries into a re or expose them to re or other heat sources.
• Follow the battery safety and usage instructions.
DISC Handling and Maintenance
Handling precautions
• Hold the disc by the edges so the surface will not be soiled with ngerprints.
Fingerprints, dirt and scratches can cause skipping and distortion.
• Do not write on the label side with a ball-point pen or other writing utensils.
• Do not use record cleaning sprays, benzine, thinner, static electricity prevention liquids.
• Be careful not to drop or bend the disc.
• Do not install more than 1 disc on the disc compartment.
• Do not try to close the disc cover when the disc is not installed properly.
• Be sure to store the disc in its exclusive case when not in use.
If the surface is soiled
Wipe gently with a soft, damp (water only) cloth. When wiping discs, always move the cloth from the center hole toward the outside, which
will not cause distortion. (If you wipe the discs using a circular motion, circular scratches are likely to occur, which will cause distortion.)
If the disc is brought from a cold to a warm environment, moisture may form on the disc. Wipe this moisture off with a soft, dry, lint-free cloth before using the disc.
Improper disc storage
You can damage discs if you store them in the following places:
• Areas exposed to direct sunlight
• Humid or dusty areas
• Areas directly exposed to a heat outlet or heating appliance
7
ACCESSORIES
All the pictures in this manual are just for your reference, appearance and display
Quick Guide
Quick Guide
8
FEATURES
21.5” LED Display
This unit has a built-in 21.5” LED display window to provide clear vision and low radiation. Support Digital Broadcasting Reception Support H.264 High Definition Display Support Multiple OSD Languages Support Full Function Remote Control Support HDMI, PC AUDIO, VGA, YPbPr, CVBS and AUDIO R/L Input Support Earphone and Coaxial Output Support Auto TV Scanning NOTE: For detailed operations, please refer to the guide on Page 34. Support TV Guide NOTE: For detailed operations, please refer to the guide on Page 24. Support TELETEXT Function NOTE: For detailed operations, please refer to the guide on Page 25. Support USB Multimedia Playback NOTE: For detailed operations, please refer to the guide on Page 27. Support PVR Function NOTE: For detailed operations, please refer to the guide on Page 26. Support TIME SHIFT Function NOTE: For detailed operations, please refer to the guide on Page 26. With Built-in DVD Player With Detachable Stand Holder With External Antenna Jack With Built-in Speakers With Noise Reduction Function
Warm Tips: For detailed formats that your memory device supports, please refer to the specifications on Page 46.
9
CONNECTIONS AND FUNCTIONS
MAIN UNIT
Front View
Side View
Back View
1. LED display screen
2. Power indicator- In standby mode the indicator light is red; when switching on the unit the indicator light is blue colour.
3. Remote control sensor
4. Stand holder
5. Disc slot- To insert a disc according to the silk screen on the side of this slot.
6. - To play or pause playing (DVD).
7. - To open or close the disc compart­ment.
8. VOLUME +/- button- To increase/ decrease the volume level or move left/right.
9. CHANNEL +/- button- To select next/ previous channel or move up/down.
10. MENU button- To enter menu setting page.
11. SOURCE button- To select the input source.
12. POWER button- To turn the TV ON/ OFF.
10
CONNECTIONS AND FUNCTIONS
Back View
1. EARPHONE output terminal
2. PC AUDIO input terminal
3. VGA input terminal
4. Y / Pb / Pr input terminals
5. COAXIAL output terminal
6. RF input terminal- To connect the external antenna.
7. AUDIO R/L input terminals
8. CVBS (Video) input terminal
9. USB input terminal- For multimedia les playback.
10. HDMI input terminals
11. Built-in speakers
11
REMOTE CONTROL
12
REMOTE CONTROL
13
REMOTE CONTROL PREPARATION
BATTERY INSTALLATION
Install the batteries as the following pictures. Be sure + and – terminals are positioned as indicated in the battery compartment (Fig1).
SERVICE LIFE OF BATTERIES
- The batteries normally last for one year although this depends on how often the remote control is used.
- If the remote control fails to work even when it is operated near the player, replace the batteries.
- Use two size AAA dry batteries.
NOTE:
• Do not drop, step on or otherwise impact the remote control. This may damage the parts or lead to malfunction.
• If the remote control is not going to be used for a long time, remove the batteries.
REMOTE CONTROL OPERATION Point the remote control from no more than about 6m from the remote control Sensor and within about 60°of the front of the player (Fig2).
NOTES:
- The operating distance may vary
according to the brightness of the room.
- Do not point bright light at remote
control sensor.
- Do not place objects between the
remote control and the remote control sensor.
- Do not use this remote control while
simultaneously operating the remote control of any other acquirements.
14
BASIC INSTALLATION
• Ensure all the cables are disconnected from the main unit before connecting to AC power source.
• Read through the instructions before connecting other equipment.
Connecting to AC power source
Main unit
To power outlet
Connect external antenna to unit
Install external antenna into antenna jack for best picture.
Power plug of antenna amplifier
Indoor antenna amplifier
Outdoor antenna amplifier
Antenna
75 OHM antenna plug
15
Composite video (cvbs) connection
BASIC INSTALLATION
AV cable (Not included)
For basic connection, use the composite Audio L/R (white/ red) and CVBS (yellow) cable to connect the unit with other devices.
Component (YPbPr) connection
AUDIO cable (Not included)
YPbPr cable (Not included)
16
HDMI Connection
BASIC INSTALLATION
HDMI cable (Not included)
Use HDMI cable to connect the unit with other devices to receive high-definition multimedia signal.
PC/VGA Connection
VGA cable (Not included)
Audio cable (Not included)
Use VGA cable and Audio cable to connect the unit with TV or PC, and use this product as a monitor.
17
BASIC INSTALLATION
Coaxial connection
Use coaxial cable to connect the unit with amplifier or other audio decoding devices for coaxial audio signal output. (Coaxial cable is not included)
Connect earphone to the unit
USB Connection
EARPHONE cable (Not included)
USB device (Not included)
18
BASIC OPERATIONS
Make sure all the equipment and power plug are connected properly and the unit is set in correct mode before kinds of operations.
• Press POWER button on the unit or remote control to power ON the unit (indicator will glow blue); press it again to power OFF (standby mode) the unit (indicator will glow red).
DVD
Press SOURCE button on the unit or remote control to switch the unit to DVD mode.
1. Basic play
a) Make sure the disc compartment has no disc. Place a disc into the disc compartment. Hold the disc without touching either of its surfaces, position it with the readable (mirror) side facing towards you, then the disc will automatically enter into the disc compartment; or you can press
button remote control to enter the disc into the disc compartment. b) Once the disc is in the disc compartment, the player starts to read the disc immediately. c) When a menu screen appears on the unit, press the navigation buttons or press the number buttons to select preferred track number, then press OK button to confirm. d) To stop playing and return to the menu screen, press TITLE or D.MENU button.
2. Stopping play
Press █ (STOP) button to stop playing. NOTE: When player is stopped, the player records the point where STOP was pressed (RESUME function). Press button again, playback will resume from this point. When the tray is taken out or █ (STOP) is pressed again, the RESUME function will be cleared.
3. Skipping ahead or backward
Skipping ahead During playback, press button to skip the next chapter (DVD) or a track (Video CD/ CD). Skipping backward During playing, press button to skip the previous chapter (DVD) or track (Video CD/CD).
19
BASIC OPERATIONS
4. Fast forward/Fast backward
During playback, press button or button to fast forward/backward. Press button to resume normal play.
5. Pause/play
During playback, press button to pause playing, press it again to resume normal playback.
6. Music playback
a) Insert the disc which contains music files and after a few seconds, the screen will show all the folders on the disc. b) Select the folder you want to play by navigation buttons and press the OK button to confirm. c) The files in this folder are displayed and select the desired song by navigation buttons, then press the or OK button to start playback. d) In file selecting page, press or button to turn to next or previous page. e) Press REPEAT button on remote control to change play mode.
- SINGLE: play one file only.
- REPEAT ONE: repeat one file.
- REPEAT FOLDER: all the files in the folder will be played repeatedly.
- FOLDER: all the files in the folder will be played. NOTE: The available repeat modes may vary for different disc.
7. Movie playback
a) Insert the disc which contains movie files and after a few seconds, the screen will show all the folders on the disc. b) Select the folder you want to play by navigation buttons and press the OK button to confirm. c) The files in this folder are displayed and select the desired file by navigation buttons, then press the or OK button to start playback.
20
d) During normal playing, press or button, the player will play the next or previous file. e) Press REPEAT button to change play mode.
- SINGLE: play one file only.
- REPEAT ONE: repeat one file.
- REPEAT FOLDER: all the files in the folder will be played repeatedly.
- FOLDER: all the files in the folder will be played. NOTE: The available repeat modes may vary for different disc. f) Press D.MENU button to return to play list page.
8. JPEG playback
For JPEG picture CD, select the folder you want to play by the navigation buttons and press OK button to confirm. The files in this folder are displayed and select your pictures by using the up/down navigation buttons and press OK button to start playback. Thumbnail of picture will be displayed while you scrolling across the file name. Then press the or OK button to start playback.
NOTE: The time of loading and displaying a picture depends on its size. During playback, press D.MENU button to return to file selecting page. Press REPEAT button to change play mode.
- SINGLE: play one file only.
- REPEAT ONE: repeat one file.
- REPEAT FOLDER: all the files in the folder will be played repeatedly.
- FOLDER: all the files in the folder will be played.
NOTE: The available repeat modes may vary for different disc.
Skip to next/previous picture
Press button to skip to the next picture or button to skip to the previous picture. If no key is pressed for 3 seconds, it will skip to next picture automatically.
Rotating pictures
- Press RIGHT navigation button to rotate the picture clockwise.
- Press LEFT navigation button to rotate the picture counter-clockwise.
BASIC OPERATIONS
21
BASIC OPERATIONS
Flipping pictures
- Press UP navigation button to ip the picture vertically.
- Press DOWN navigation button to ip the picture horizontally.
Picture Shrink/Zoom
Press ZOOM button repeatedly to enlarge or shrink picture to 50%, 75%, 100%, 125%, 150% and 200%. NOTE: If the picture is enlarged, you may press navigation buttons to pan across other portions of the picture.
9. Enjoying Video CD with playback control
a) When playing VCD 2.0 with PBC, the player will show the VCD version. b) Press D.MENU button on remote control repeatedly to set PBC ON or OFF. c) Press number buttons to select corresponding track. Example: Track 9, press 0 and 9, several seconds later, it will automatically switch to track
9. Track 15, press -/-- and 5, several seconds later, it will automatically switch to track 15. d) Press or button, the player will play the next or previous track.
10. Viewing from different angle (DVD only)
Some DVDs may contain scenes which have been shot simultaneously from a number of different angles. For these discs, the same scene can be viewed from each of these different angles using the ANGLE button.
11. Repeat play
Press REPEAT button during playback, it will repeat play one chapter or one title (for DVD disc), or repeat play track (for VCD/CD).
A-B repeat play Repeating sections between two specic points (A-B repeat) a) Press A-B button during playing at the point where repeat play is to be started (A). b) Press A-B button at the point where repeat play is to be ended (B). Repeat play of the selection between points A and B starts. c) Press A-B button again to return to normal play
22
12. GOTO
Press GOTO button continuously to select the item you want to set and enter a time number, Chapter number, track number, etc. Accordingly, the disc will be played from the selected point.
13. DISPLAY
Press DISPLAY button to display the playing status of your disc.
14. Change subtitle language (DVD only)
It is possible to change the subtitle language to a different language from the one selected at the initial settings. (This operation works only with discs on which multiple subtitle languages are recorded)
1. Press SUBTITLE button during play, the screen will display the current language.
2. Press SUBTITLE button again to change language or turn off. NOTE: When no subtitles are recorded, press this button will not work.
15. ZOOM play
This function allows you to enjoy a motion picture. Press ZOOM button when playing, the screen shows: Press navigation button to scroll across the enlarged picture.
16. Changing audio sound track language (DVD/VCD/CD disc)
It is possible to change the audio sound track language to a different language from the one selected at the initial settings (This operation works only with discs on which multiple audio sound track languages are recorded).
- When playing a disc, press LANG button to select desired and available sound track language. NOTE: When no sound track languages are recorded, pressing this button will not work.
17. Initial settings
Once the initial programming is entered it will be retained in memory until changed, the player can always be operated under the same conditions. Common procedure for initial settings
• Press D.SETUP button on remote control.
• Use the navigation buttons to select preferred item, and press OK button, each screen
for setting the value is displayed. Then move the navigation buttons to set the item and press OK button to conrm the settings.
• Press D.SETUP button again to close setup menu.
• Use LEFT or RIGHT navigation button to switch to another main setup item. Then press
RIGHT or OK button to enter submenu page; press LEFT button to return to previous menu page.
BASIC OPERATIONS
23
1.1 TV DISPLAY - It is for selecting TV output mode. Options: a) Normal /PS: Pan & scan mode. b) Normal/ LB: Letter box mode. c) Wide: 16:9 wide screen mode.
1.2 OSD LANG - It is used to choose your desired OSD language.
1.3 SCREEN SAVER - If no operation is carried out for 5 minutes, screen saver will
display on the screen when SCREEN SAVER is ON.
1.4 LAST MEMORY - Enter another input source during DISC playback, and then back to DVD input source again, this unit will resume playback from the point where last playback was stopped, if LAST MEMORY is ON.
2. AUDIO
Downmix - It is used to select desired audio output mode. Options: a) LT/RT-Left/Right mix mode b) STEREO
3. PREFERENCE
3.1 TV TYPE - Select desired TV system.
3.2 AUDIO - Select desired audio language, if your disc contains multiple audio languages.
3.3 SUBTITLE - Select desired subtitle language, if your disc contains multiple subtitle languages.
3.4 DISC MENU - Select desired language of your disc menu, if your disc menu contains multiple MENU languages.
3.5 PROGRAM CONTROL - Select desired program rating.
3.6 PASSWORD - Change the password. Input the password using number buttons
on remote control. NOTE: The factory default password is “0000”, you can change it, but you should
keep it safe. If you forget it, please use the universal password “4711”.
3.7 DEFAULT - It is used to reset to factory settings.
GENERAL
24
- Press SOURCE button on the unit or remote control to switch the unit to ATV or DTV mode.
SELECT DESIRED PROGRAM
1. Press CH+ button to play next channel.
2. Press CH- button to play previous channel.
3. Press number buttons on remote control directly to select desired program. NOTE: Press -/-- button repeatedly to switch the digit.
VOLUME CONTROL
- Press VOLUME +/- to adjust the level of current volume. Available range: 0-100.
MUTE CONTROL
- Press MUTE button to mute the sound, press it again to turn on the sound.
SOURCE SETTING
- Press SOURCE button on the unit or remote control to display the sources list.
- Press UP or DOWN navigation button to select desired input source, and then press OK button to conrm selection.
Available options: DTV, ATV, AV, YPbPr, HDMI, PC, USB, DVD.
PICTURE MODE
- Press P-MODE button on remote control repeatedly to select desired PICTURE mode directly. Available options: Standard, Mild, Personal, Dynamic.
SOUND MODE
- Press S-MODE button on remote control repeatedly to select SOUND mode directly. Available options: Standard, Music, Personal, Movie.
SLEEP TIME SETTING
- Press SLEEP button on remote control repeatedly to select SLEEP TIME directly. Available options: Off, 5/15/30/60/90/120/240 minutes.
VIDEO SIZE SETTING
- Press ASPECT button on remote control repeatedly to select VIDEO SIZE directly. Available options: Auto, 4:3, 16:9, Zoom1, Zoom2. NOTE: If there’s no signal, pressing ASPECT button will not work. And the available
video size may be different for different input source.
OPERATING THE MENU (DTV)
25
MULTIAUDIO SETTING
- Press AUDIO button on remote control repeatedly to select desired audio language. NOTE: To enable this function, make sure that the channel you are viewing supports multi-audio languages.
INFORMATION DISPLAY
- Press DISPLAY button on remote control to display information of current program.
TV GUIDE (FOR DTV MODE ONLY)
- Press EPG button on remote control to enter EPG menu page.
- Press UP/DOWN navigation button to select preferred program
- Press LEFT/RIGHT navigation button to switch between left column and right column.
- Press RED button to display the TV guide of previous day.
- Press GREEN button to display the TV guide of next day.
- Press YELLOW button to enter schedule list page.
- Press BLUE button to enter reminder setting page.
OPERATING THE MENU (DTV)
26
FAVOURITE LIST
When viewing an available channel, press FAV button on remote control to enter Favourite List menu page.
- Press UP or DOWN navigation button to select preferred channel.
- Press OK button to conrm selection.
- Press RED button on remote control to remove current channel from Favourite List.
- Press GREEN button on remote control to add current channel to Favourite List.
QUICK SELECT
When viewing an available channel, press OK button on remote control to enter Channel List menu page.
- Press UP or DOWN navigation button to select preferred channel.
- Press OK button to conrm selection.
TELETEXT
- Press TEXT button on remote control to display the available teletext information and press it repeatedly to stop playing the teletext.
TV/RADIO (FOR DTV MODE ONLY)
- Press TV/RADIO button on remote control to switch the unit between TV and radio mode.
SUBTITLE
- Press SUBTITLE button on remote control repeatedly to select desired subtitle. NOTE: To enable this function, make sure that the channel you are viewing supports multi-subtitle.
FREEZE
- During normal playing, press FREEZE button on remote control to hold the picture, and press it again to resume normal playing.
OPERATING THE MENU (DTV)
27
RECORDER (FOR DTV MODE ONLY)
- Insert your USB memory device into USB slot rst. When watching a digital program:
- Press button on remote control to start recording directly.
- Press button on remote control to call out a dialog box, and select Yes to stop recording;
select No to dismiss the dialog box. To watch recorded programs:
- Press INDEX button on remote control to call out the PVR Settings page.
- Highlight File Manager and press OK button to enter it.
- Then press UP/DOWN navigation button to select recorded les and press OK button to start playback.
TIME SHIFT (FOR DTV MODE ONLY)
- Insert your USB memory device into USB slot rst. When watching a digital program:
-If you don’t want to miss any programs when left, press button on remote control to
enter TIME SHIFT mode.
- Press button again when you’re back to display the tool bar.
- Press LEFT/RIGHT navigation button to select “Play” and press OK button to play the program in TIME SHIFT mode.
- To stop TIME SHIFT, press on remote control to call out a dialog box. Select Yes to exit TIME SHIFT mode and select No to dismiss the dialog box.
OPERATING THE MENU (DTV)
28
MEDIA PLAYBACK
- Press SOURCE button on the unit or remote control to switch the unit to USB mode.
- Insert a USB memory device into USB slot before following operations.
- Press UP/DOWN/LEFT/RIGHT navigation button to move the cursor.
- Press EXIT button to return to previous menu page. NOTE: Press MEDIA button on remote control to enter MEDIA mode directly.
1. Photo
- Press LEFT/RIGHT navigation button to select Photo in the main menu and press OK button to enter it.
- Use navigation buttons to select desired folder or le and press OK button to start playing.
When playing Photo les:
- Press DISPLAY button on remote control to hide/display the indication tool bar.
- Press OK button repeatedly to switch between Slide Show and Single View.
- Press LEFT/RIGHT navigation button to play previous/next le.
- Press UP/DOWN navigation button to rotate a photo clockwise/counter clockwise. NOTE: You can rotate a photo only when slide show is paused.
- Press BLUE button on remote control to call out Quick Menu and press it again to dismiss the menu.
OPERATING THE MENU (DTV)
29
OPERATING THE MENU (DTV)
Interval Time: Set the slide show interval time. Repeat: Select desired repeat mode. Slideshow Effect: Select desired slide show effect. Background Music: Turn on/off background music.
2. Music
- Press LEFT/RIGHT navigation button to select Music in the main menu and press OK button to enter it.
- Use navigation buttons to select desired folder or le and press OK button to start playing.
30
OPERATING THE MENU (ATV)
When playing Music les:
- Press CH+/- button on remote control to switch between Player and File List.
- Press BLUE button on remote control to call out Quick Menu and press it again to dismiss the menu.
Repeat: Select desired repeat mode. Background Music: Turn on/off background music.
3. Movie
- Press LEFT/RIGHT navigation button to select Movie in the main menu and press OK button to enter it.
- Use navigation buttons to select desired folder or le and press OK button to start playing.
When playing Movie les:
- Press DISPLAY button on remote control to hide/display the indication tool bar.
- Press LEFT/RIGHT navigation button to select preferred option and press OK button to conrm it.
4. Text
- Press LEFT/RIGHT navigation button to select Text in the main menu and press OK button to enter it.
- Use navigation buttons to select desired folder or le and press OK button to start playing.
When playing Text les:
- Press LEFT/RIGHT navigation button to display previous/next page.
- Input your desired page using number buttons and press OK button to go to desired page directly.
- Press BLUE button on remote control to call out Quick Menu and press it again to dismiss the menu.
31
Repeat: Select desired repeat mode. Background Music: Turn on/off background music. Encode Type: Select desired encode type.
Remote operations when playing multimedia les:
- Press button on remote control to play or pause playing.
- Press button on remote control to stop playing.
- Press button on remote control to move fast backward.
- Press button on remote control to move fast forward.
- Press button on remote control to play previous le.
- Press button on remote control to play next le.
NOTE: To play your multimedia les, make sure you have selected correct icon in the main menu of MEDIA PLAYBACK. That is to say, you can only play Photo les in PHOTO item, Music les in MUSIC item and so on.
OPERATING THE MENU (ATV)
32
MAIN MENU
• The unit contains different setting menus. Once the initial programming is entered, it will be remained in the memory until change, and the unit can always be operated under the same conditions.
• The settings will be remained in the memory until the settings are changed, even after setting the player to standby mode.
Common procedure for initial settings
- Press MENU button on the unit or remote control to display the main menu.
- Press LEFT or RIGHT navigation button to select submenus.
- Press OK or RIGHT navigation button to enter submenu page.
- Press UP or DOWN navigation button to select preferred option.
- Press LEFT or RIGHT navigation button to adjust the value.
- Press MENU button to return to previous menu page.
- Press EXIT button to exit menu page.
First Time Setup
- Connect to power source and turn on this TV, then below setup page will display on the
screen:
OSD Language
- Press LEFT/RIGHT navigation button to select desired on-screen display language.
Country
- Press LEFT/RIGHT navigation button to select the country you’re living in.
Auto Scan
- Press LEFT/RIGHT navigation button to select desired scanning type.
Once above settings are nished, highlight “Start” and press OK button to scanning available programs automatically.
33
DTV MODE
- Press SOURCE button on the unit or remote control to select DTV input source.
1. Picture
1.1 Picture Mode Available options: Standard, Mild, Personal, Dynamic.
1.2 Brightness The brightness value of picture can be adjusted from 0-100.
1.3 Contrast The contrast value of picture can be adjusted from 0-100.
1.4 Sharpness The sharpness value of picture can be adjusted from 0-100.
1.5 Saturation The colour saturation value of picture can be adjusted from 0-100. NOTE: If the value of Brightness, Contrast, Sharpness or Saturation has been changed, Picture Mode will turn to Personal automatically.
1.6 Hue This item is used to adjust the tone of colour in NTSC system from -50 to 50.
1.7 Colour Temp This item is used to adjust the optimum colour temperature for suitable viewing. Available options: Normal, Cool, Warm.
1.8 Aspect Ratio This item is used to adjust the video size. Available options: Auto, 4:3, 16:9, Zoom1, Zoom2. NOTE: If there’s no signal, pressing ASPECT button on remote control will not work.
And the available video size may be different in different input source.
1.9 Advanced Settings
1.91 NR (Noise Reduction) This item is used to adjust the NR level. Available options: Off, Weak, Medium, Strong.
34
1.92 MPEG NR (MPEG Noise Reduction)
This item is used to adjust the MPEG NR level. Available options: Off, Weak, Medium, Strong.
1.93 Dynamic Contrast
This item is used to adjust Dynamic Contrast level. Available options: Off, Weak, Medium, Strong.
2. SOUND
2.1 Sound Mode
Available options: Standard, Music, Personal, Movie.
2.2 Treble
This item is used to adjust the level of higher-pitched sounds from -50 to 50.
2.3 Bass
This item is used to adjust the level of lower-pitched sounds from -50 to 50. NOTE: If the value of Treble or Bass has been changed, Sound Mode will turn to Personal automatically.
2.4 Balance
This item is used to adjust the audio output between left and right speaker from -50 to 50.
2.5 Surround Sound
This item is used to turn on/off Surround Sound function.
2.6 EQ Setting
This item is used to set the equalizer. Available EQ Mode: Off, Rock, Pop, Jazz, User.
2.7 AVL (Auto Volume Level)
This item is used to turn on/off AVL function.
2.8 S/PDIF
This item is used to select desired S/PDIF audio output type. Available options: Off, PCM, Auto.
2.9 Audio Description
- Press OK or RIGHT navigation button to enter it.
- Then you can turn on/off Mode and adjust the volume when Mode is on.
NOTE: For Visually Impaired users, Audio Description can assist them know a certain scene or action through the narration, instead of see it. However, this function works only when you are viewing programs that contain related narration information.
SOUND
35
2.10 Sound Type This item is used to select desired Sound Type. Available options: Stereo, Dual I, Dual II, Mixed.
3. Channel (Figure 1)
3.1 Auto Scan (Figure 2)
- Press OK or RIGHT navigation button to enter it. Country: Select your country. Mode: Select your scanning type. Start: Start scanning.
3.2 Manual Scan
- Press OK or RIGHT navigation button to enter it and then you can select digital or analog manual scan.
3.21 Digital Manual Scan
- Press OK or RIGHT navigation button to enter it. Digital Scan: Select the channel. Start: Start scanning. Frequency: For this TV, it’s not user adjustable. Strength: Display the signal strength of current program and it’s not user adjustable.
3.22 Analog Manual Scan
- Press OK or RIGHT navigation button to enter it. Analog Scan: Use LEFT/RIGHT navigation button to fine tune it. Channel to Save: Select the channel number to be saved. Color System: Select desired color system Sound System: Select desired sound system. AFC: Turn on/off automatic fine tune. Start: Start scanning NOTE: Color System, Sound System and AFC will not be adjustable if there’s no signal.
CHANNEL
36
CHANNEL
3.3 Channel Edit
- Press OK or RIGHT navigation button to enter it.
- Press UP/DOWN navigation button to highlight desired channel.
- Press RED button on remote control to delete highlighted channel.
- Press GREEN button on remote control to skip highlighted channel.
- Press BLUE button on remote control to enter MOVE mode. Then use UP/DOWN navigation button to select preferred position and press BLUE button again to move it.
3.4 Signal Information This item is used to display signal details, for example: Channel Number, Frequency, Quality and Strength.
4. Lock System
- Press OK or RIGHT navigation button to enter it.
- Input the factory default password “0000” using number buttons on remote control.
- Press UP/DOWN navigation button to select preferred item. NOTE: If you forget the password, please use the universal password “4711”.
4.1 Enable This item is used to enable/disable Lock System.
4.2 Channel Locks
- Press OK or RIGHT navigation button to enter it.
- Press UP/DOWN navigation button to select the channel that you want to lock.
- Press OK button repeatedly to lock/unlock highlighted channel.
4.3 Parental Rating This item is used to select desired program rating. Available options: No Block, Block G+, Block PG+, Block M+, Block MA+, Block AV+, Block R+, Block All+,
4.4 Lock Keyboard This item is used to turn on/off the lock of buttons on this unit.
LOCK SYSTEM
37
4.5 Hotel Mode
- Press OK or RIGHT navigation button to enter it.
- Press UP/DOWN navigation button to select desired item.
- Press LEFT/RIGHT navigation button to adjust the value.
- Press OK or RIGHT navigation button to enter submenu.
- Press MENU button to return to previous page. 37 Active Hotel Mode: Turn on/off Hotel Mode. Max Vol.: Set the maximum volume level. Default Vol.: Set the default volume level. Source Lock: Turn on/off the lock of available sources. Default source: Set the default source. Default Dtv program: Set the default digital program. Default Atv program: Set the default analog program. Backup to USB: Backup the data to USB memory device. Restore from USB: Restore data from USB memory device and then your TV will turn to STANDBY mode. Recall: Recall the default settings of Hotel Mode. NOTE: We strongly advise that you use Hotel Mode in hotels and you should just ignore it if take this TV for home use only.
4.6 New Password
- Input your new password using number buttons on remote control and conrm it again to own your private password.
4.7 Clear Lock This item is used to clear your current lock settings.
LOCK SYSTEM
38
5. Setup
5.1 OSD Language This item is used to select desired on-screen display language.
5.2 Audio Languages
- Press OK or RIGHT navigation button to enter it.
- Then you can select desired Audio Primary Language and Audio Secondary Language. NOTE: Audio Languages will not be adjustable if there’s no signal.
5.3 Subtitle
- Press OK or RIGHT navigation button to enter it.
- Then you can select desired Subtitle Primary/Secondary Language and turn on/off Hearing Impaired function when Mode is on. NOTE: Subtitle will not be adjustable if there’s no signal.
5.4 Teletext
- Press OK or RIGHT navigation button to enter it.
- Then you can select desired Digital TELETEXT Language and Decoding Page Language.
5.5 Blue Screen This item is used to turn on/off Blue Screen. The screen background will turn blue at very weak or no signal condition, if Blue Screen is ON.
5.6 Time Settings
- Press OK or RIGHT navigation button to enter it.
- Press UP/DOWN navigation button to select desired item.
- Press LEFT/RIGHT navigation button to adjust the value.
5.61 OSD Time This item is used to select desired OSD menu duration. Available options: Off, 10/20/30/60 seconds.
5.62 Sleep Timer This item is used to adjust the Sleep Timer. Available options: Off, 5/15/30/60/90/120/240 minutes.
5.63 Auto Sleep This item is used to select desired Auto Sleep (standby) duration. Available options: Off, 3/4/5 hours.
5.64 Time Zone This item is used to select desired time zone.
5.65 Time
- Press OK or RIGHT navigation button to enter it.
- Press UP/DOWN navigation button to select desired item.
- Press LEFT/RIGHT navigation button to adjust the value.
SETUP
39
SETUP
Auto Sync: Synchronize the time with your channel if Auto Sync is on. And you can adjust the Date and Time when Auto Sync is off. Power On Timer: Turn on/off auto power on timer. You can adjust the Time, Power On Source, Power On Channel when this timer is on. Power Off Timer: Turn on/off auto power off timer. You can adjust the Time when this timer is on. To adjust the date and (or) time:
- Highlight the date and (or) time and press OK button to enter adjusting page.
- Press UP/DOWN navigation button to adjust it.
- Press OK button to conrm setting; press EXIT button to cancel it.
5.7 HDMI CEC Control To use HDMI CEC function:
- Make sure the HDMI device (Amplier, etc.) is connected correctly.
- Press SOURCE button on the unit or remote control to select HDMI input source.
5.71 HDMI CEC Control This item is used to turn on/off HDMI CEC (Consumer Electronic Control).
5.72 ARC This item is used to turn on/off Audio Return Channel. When ARC is on, the TV can return the audio to connected HDMI device (Amplier, etc.).
5.73 CEC Menu Control Press OK or RIGHT navigation button to enter it. Home menu: Call out the Home menu of connected CEC device. Option: Call out the Option menu of connected CEC device. Content: Call out the Content menu of connected CEC device.
5.74 Device List This item is used to display the available device that connected.
5.8 PVR Settings
- Press LEFT/RIGHT navigation button to select item and press OK button to enter it.
40
SETUP
5.81 File Manager
- Press UP/DOWN navigation button to select a recorded le.
- Press RED button on remote control to play highlighted le from the beginning.
- Press GREEN button on remote control to delete highlighted le.
- Press YELLOW button on remote control to delete all recorded les.
- Press BLUE button on remote control to zoom in/out.
5.82 Device List
- In this part, you can check the available space and le system of your USB memory device.
- Press RED button on remote control to format your USB memory device.
5.83 Scheduled Record
- Press GREEN button on remote control to delete highlighted option.
- Press YELLOW button on remote control to delete all.
- Press UP/DOWN navigation button to select the Group.
- Press OK button to enter Scheduled Record setting page.
41
SET UP
Frequency
- Press LEFT/RIGHT navigation button to select desired mode: Off, Once, Daily, Weekly, Weekend. Channel
- Press LEFT/RIGHT navigation button to select desired channel. Start Time
- Press navigation buttons to select desired start date and time of your scheduled recording. End Time
- Press navigation buttons to select desired end date and time of your scheduled recording. NOTE: Once above settings are completed successfully, select “Save” to save it.
5.9 First Time Setup This item is used to recall First Time Setup page (see Page 31 for details).
5.10 Reset This item is used to reset to factory default settings.
5.11 Software Update (USB) This item is used to update software through USB memory device. ATV AND OTHER MODES
- Press SOURCE button on the unit or remote control to select desired input source.
- For menu operations in these modes, please refer to the menu operations of DTV mode.
PC MODE
- Connect a personal computer to this unit.
- Power on your computer and this unit.
- Press SOURCE button on the unit or remote control to select PC input source.
- Press MENU button to display the main menu and select Picture using LEFT/RIGHT navigation button.
- Use UP/DOWN navigation button to highlight PC Setting and press OK or RIGHT navigation button to enter it.
- Press UP/DOWN navigation button to select preferred item.
- Press OK or RIGHT navigation button to enter submenu. Press LEFT/RIGHT navigation button to adjust the value.
1. Auto Adjust This item is used to adjust the PC screen automatically.
2. H Position This item is used to adjust the value of horizontal position (available range: -30 to 30).
42
SET UP
3. V Position This item is used to adjust the value of vertical position (available range: -30 to 30).
4. Phase This item is used to adjust the picture apply to the TV (available range: 0 to 31).
5. Clock This item is used to adjust the signals transfer speed (available range: -30 to +30). NOTE: For other menu operations in PC mode, please refer to the menu operations of DTV mode.
43
MAINTENANCE
• Be sure to press POWER button to set the player to the standby mode and disconnect the power plug before maintaining the player.
• Wipe the player with a dry, soft cloth.
• If the surface is extremely dirty, wipe clean with a cloth which has been dipped in a weak soap-water solution and wrung out thoroughly, and then wipe again with a dry cloth.
• Never use alcohol, benzene, thinner, cleaning uid or other chemicals. And do not use compressed air to remove dust.
44
WALL MOUNTING
• Contact a professional for assistance when wall mounting your TV. We are not responsible for any damage to the product or injury to yourself, if you mount the TV on your own.
• Do not wall mount the TV while TV is turned on. It may cause personal injury due to electric shock.
• Use standard M4*10mm screws (4 pieces) to mount this TV.
45
STAND INSTALLATION
Your TV is packaged with the Stand and the Cabinet separated. Before enjoying this TV, please carry out the Stand Installation according to the instructions below.
Step 1 Place the TV faced down on a soft cloth or cushion to prevent the panel from being damaged.
Step 2 Align the stand and the bottom of this TV.
Step 3 Tighten the included screws with a screw driver.
NOTES:
- Unplug the power plug rst when installing or
removing the TV Stand.
- To avoid any damage to this TV, contact one or
more partner for assistance when installing or removing the TV stand.
46
SPECIFICATIONS
Region code setting
Region coding: All DVD discs are coded by the sales territory. Please note the player is set to region 4 coding by the factory which cannot be changed. This is in compliance with the DVD patent requirements.
47
GENERAL TROUBLESHOOTING
Check the following points before assuming malfunctions of this unit:
48
GENERAL TROUBLESHOOTING
M.E.W. (Australia) Pty Ltd
15 Vaughan St
Essendon Fields VIC 3041
ACN 152 719 036
www.gvaproducts.com.au
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use