11
12
13
14
Scr ews
Bac k cover
Wate r drain age out let
Fig .3
11
12
13
14
Scr ews
Bac k cover
Wate r drain age out let
Fig .3
11L EVAPORATIVE
COOLER
G11ECW16
Instruction Manual
GVA PRODUCTS DETAILS
File Name: IM_G11ECW16_OLN9259_V0.07_TC020516
Name: 11L Evaporative Cooler
Proof Version: Proof 1
Date: 2nd May 2016
M.E.W. (Australia) Pty Ltd
15 Vaughan St
Essendon Fields VIC 3041
ACN 152 719 036
1300 725 885
customercare@gvaproducts.com.au
gvaproducts.com.au
While every effort has been made in the preparation of this instruction manual, the publishers cannot be held
responsible for the accuracy of the information contained herein or any consequences arising from it.
IM_G11ECW16_OLN9259_V0.06_TC020516.indd 2-3 2/05/16 2:53 PM
11
12
13
14
Scr ews
Bac k cover
Wate r drain age out let
Fig .3
11
12
13
14
Scr ews
Bac k cover
Wate r drain age out let
Fig .3
Guide to the Appliance 2
Caring for the Environment 3
Important Safety Instructions 4
Operation Instructions
Before Use 5
Control Panel 6
Remote Control 7
Care and Maintenance 8,9
Technical Specifications 10
Contents Guide to the Appliance
1. Control Panel 8. Back Cover
2. Louvre 9. Filter
3. Water Level Indicator 10. Water Drainage Outlet (with plug)
4. Castor Wheels x 4 11. Carry Handle
5. Water Tank 12. Opening for Filling Water/ Ice
6. Power Cord 13. Water Curtain
7. Remote Control Storage 14. Electric Motor Connection
Note: Due to production improvements, the appliance may differ slightly from the diagram shown. Diagrams
in this instruction manual are for reference only.
8
9
10
11
12
1
2
3
4
5
6
7
13
14
8
9
10
11
12
13
14
13
14
1 2
IM_G11ECW16_OLN9259_V0.06_TC020516.indd 4-5 2/05/16 2:53 PM
11
12
13
14
Scr ews
Bac k cover
Wate r drain age out let
Fig .3
11
12
13
14
Scr ews
Bac k cover
Wate r drain age out let
Fig .3
Caring for the Environment Important Safety Instructions
Responsible disposal of the packaging
The packaging of your appliance has been selected from environmentally friendly materials and
can usually be recycled. Please ensure these are disposed of correctly.
Plastic wrapping can be a suffocation hazard for babies and young children, please ensure all
packaging materials are out of reach and are safely disposed of. Please ensure they are offered
for recycling rather than throwing these materials away.
Responsible disposal of the appliance
At the end of its working life, do not throw this appliance out with your household rubbish.
An environmentally friendly method of disposal will ensure that valuable raw materials can be
recovered and used again.
Electrical and electronic appliances contain materials and substances which, if handled or
disposed of incorrectly, could be potentially hazardous on the environment and human health.
Observe any local regulations regarding the disposal of electrical consumer goods and dispose
of it appropriately for recycling.
The plug must be rendered useless and the cable cut off directly behind the appliance to
prevent misuse.
Thank you for choosing this GVA product. Please read these instructions thoroughly before using
the appliance and save it for future reference.
WARNING: When using electrical appliances, basic safety precautions should always be
followed to reduce the risk of fire, electrical shock and personal injury.
1. Always operate the product from a power source of the same voltage, frequency and rating
as indicated on the product’s identification plate.
2. This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
3. This product is not a toy! Children should be supervised to ensure that they do not play with
the appliance.
4. To protect against electrical hazard, do not immerse in water or other liquids. Do not expose
the product or power cord to rain, moisture or any liquid other than the intended water filler
and ice tank.
5. Do not use in the immediate vicinity of water, such as bath tub, washbowls, swimming pool etc.
where the likelihood of immersion or splashing could occur.
6. This appliance is for indoor use only.
7. Never install the unit where it could be subject to:
a. Heat sources such as radiators, heat registers, stoves or other products that produce heat
b. Direct sunlight
c. Mechanical vibration or shock
d. Excessive dust
e. Lack of ventilation, such as a cabinet or bookcase
f. Uneven surfaces
8. Avoid contact with moving parts.
9. Do not place objects on top of the unit or allow objects to obstruct the inlet or outlet openings.
Do not operate in close proximity to walls or curtains.
10. Do not unplug the unit if your hands are wet. This could cause an electrical shock.
11. To reduce the risk of electric shock, DO NOT remove the cover (or back) whilst the unit is in
operation or connected to the mains supply.
12. This product operates with water - operate and move the product with extreme care.
13. Place it on a secure and level area. Keep out of reach of children to prevent any accidents.
14. Unauthorised use and technical modifications to the appliance can lead to danger to life
and health.
15. Do not push any object into the appliance. Do not disassemble the appliance.
16. If the plug or supply cord is damaged, it must be replaced by the manufacturer, its ser vice
agent or similarly qualified persons in order to avoid a hazard.
17. Always unplug the appliance before filling water/ice and cleaning.
18. Always operate and store the unit in an upright position.
19. Do not operate this cooler in any manner not described in this manual.
20. Do not operate the unit with a damaged cord or plug, or after the unit malfunctions, or is
damaged in any manner.
3 4
IM_G11ECW16_OLN9259_V0.06_TC020516.indd 6-7 2/05/16 2:53 PM
11
12
13
14
Scr ews
Bac k cover
Wate r drain age out let
Fig .3
11
12
13
14
Scr ews
Bac k cover
Wate r drain age out let
Fig .3
Operation Instructions Operation Instructions
Before Use (Do Not connect the power plug as yet) Control Panel
1. Adding water to the unit
Ensure that the plug on the Water Drainage Outlet of the unit is secure. Pour clean cold water
into the opening on the side of the unit as shown. Make sure not to overfill - check the Water Level
Indicator on the bottom front panel.
2. Adding ice to the unit
Once some water is filled, ice may be added to improve the cooling performance.
Note: For the Cooling function to operate correctly, water is required in the water tank; ice is
optional, and may be added for extra cooling if desired.
Close the opening on the side of the unit after filling water or ice.
3. Connecting the power cord
Connect the unit to a power outlet of the same voltage and frequency as indicated on the rating
label.
1. SWING button (see Fig. 1/2)
• Press ‘SWING’ button on the Control Panel or the Remote Control once (the indicator light
turns on) to turn on horizontal louvre oscillation.
• Press ‘SWING’ button again to turn off oscillation.
NOTE: The vertical louvre does not oscillate. It can be adjusted manually to the desired position.
2. TIMER button (see Fig. 1/2)
• Press ‘TIMER’ button on the Control Panel or the Remote Control to set the unit turn-off time.
• The timer can be set from 0.5 - 7.5hours in increments of 30 minutes.
• The corresponding indicator lights turn on to display the set time.
• For example, if 3.5 hours is set, the 0.5 Hr, 1 Hr and 2 Hr indicators are on.
• Continue pressing the ‘TIMER’ button until all indicators turn off to stop the timer – i.e. to
have the unit working continuously.
NOTE: You can also use the ‘CANCEL TIMER’ button on the Remote Control to turn off the timer at
any time.
3. COOL button (see Fig. 1/2)
• Press the ‘COOL’ button (the indicator light turns on) on the Control Panel or the Remote
Control to start the cooling function. Here, the unit’s Water Curtain is soaked in water so
that the air blown out will be cooler after passing through the Water Curtain.
• Ice can also be added to the water in the Water Tank to improve the cooling performance.
• Press the ‘COOL’ button again to switch the cooling function OFF.
Note: Use the compartment on the side of the unit to fill water (and ice, if desired) into the Water
Tank before using cool function. DO NOT overfill the Water Tank.
4. SPEED button (see Fig. 1/2)
• Press the ‘SPEED’ button on the Control Panel or the Remote Control to choose fan speed High-Medium-Low.
• The corresponding indicator lights turn on.
8
9
10
11
12
1
2
3
4
5
6
7
13
14
Scr ews
Bac k cover
Wate r drain age out let
8
9
10
11
12
1
2
3
4
5
6
7
13
14
COO L SPEE D TIMER SWIN G ON/ STANDB Y
Fig .1
ON/ STANDB Y
COO L
SWI NG
TIM ER
SPE ED
CAN CEL
TIM ER
Fig .2
(Fi g.7)
(Fi g.6)
(Wat er Curtai n)
(Fi g.4)
(Fi lter)
Pre ss the tw o clips d own
and t hen pul l the fil ter out .
(Fi g.5)
Scr ews
Bac k cover
Wate r drain age out let
Fig .3
5 6
IM_G11ECW16_OLN9259_V0.06_TC020516.indd 8-9 2/05/16 2:53 PM
11
12
13
14
Scr ews
Bac k cover
Wate r drain age out let
Fig .3
11
12
13
14
Scr ews
Bac k cover
Wate r drain age out let
Fig .3
Operation Instructions Care and Maintenance
5. ON/STANDBY button (see Fig. 1/2)
• Pre ss th e ‘ON/ STANDBY ’ ( )button on the Control Panel or the Remote Control to turn on the unit.
• Press the ‘ON/ STANDBY’ button again to switch the unit to standby.
Remote Control
The remote control uses 2 x ‘AAA’ battery (not included). Before use, open the remote control
compartment and insert the battery ensuring correct polarity as shown.
The buttons on the remote control have the same functions as the buttons on the control panel.
There is an additional ‘CANCEL TIMER’ button that can be used to turn off the timer at any time.
To ensure effective operation, it is recommended that the filtering system be cleaned once every
1-2 months of regular use. Be sure to clean and thoroughly dry all components before storage;
this prevents mould build-up.
1. Disconnect the unit from the mains supply.
2. Before emptying the Water Tank, make sure you either have a large enough container under
the Water Drainage Outlet to collect the water, or carefully wheel the unit outside to drain the
water onto the ground.
3. Empty the Water Tank by loosening the plug of the Water Drainage Outlet. It is important after
every season to clean the Water Tank and filter system of the unit.
CAUTION: Care must be taken as the filter system contains electric cables and motor. These
components must not be splashed or immersed in water.
4. Loosen and remove the 3 screws on the rear of the unit (see Fig.3). Once the electric motor
connection near the top is disconnected (Fig.5), the back cover can be removed completely.
13
14
Fig .3
8
9
10
11
12
1
2
3
4
5
6
7
13
14
(Fi g.7)
(Fi g.6)
(Wat er Curtai n)
(Fi g.4)
(Fi lter)
Pre ss the tw o clips d own
and t hen pul l the fil ter out .
(Fi g.5)
Scr ews
Bac k cover
Wate r drain age out let
Fig .3
13
14
Scr ews
Bac k cover
Wate r drain age out let
Fig .3
7 8
IM_G11ECW16_OLN9259_V0.06_TC020516.indd 10-11 2/05/16 2:53 PM
11
12
13
14
Scr ews
Bac k cover
Wate r drain age out let
Fig .3
11
12
13
14
Scr ews
Bac k cover
Wate r drain age out let
Fig .3
Care and Maintenance Technical Specifications
5. The Filter is connected to the Back Cover via two clips at the top. Release by pressing the two
clips down and give it a little pull. Be careful to avoid damaging the filter.
NOTE: Do not immerse the Filter in water or any other liquid. This Filter should not be allowed to
become wet. To clean the Filter, use a vacuum cleaner on low setting. Leave the Filter in a sunny
place to dry it out if necessary.
6. The Water Curtain (supported by two rollers) can be removed for cleaning with mild soap and
a soft brush. We recommend cleaning it after every 6 months of regular use.
7. Wipe out and dry the Water Tank at the bottom of the unit. Replace the Water Drainage Plug.
We recommend cleaning the Water Tank after every 2 months of regular use.
8. Dry the Filter, the filter assembly and the Water Curtain before re-assembling.
9. To clean the exterior surfaces, simply wipe over with a soft damp cloth. If necessary, greasy
marks may be removed from the outer surfaces by using mild soap and a cloth dampened in
warm water. Avoid all other types of detergents, cleaners or solvents that may contain chemicals
as these could damage parts of the unit. Thoroughly dry all parts before storage or further use.
10. Store in a cool, dust-free location for future use.
Model number: G11ECW16
Rated voltage: 220-240V
~
Rated frequency: 50Hz
Rated wattage: 70W
Ambient operating temperature: 5˚C~40˚C
Subject to technical change without notice
9 10
IM_G11ECW16_OLN9259_V0.06_TC020516.indd 12-13 2/05/16 2:53 PM
Loading...