Instruction Manual
1.7 Cordless White Kettle
/ GVA2019
2
Important Safety Instructions
Store this instruction manual in a safe place, along with your warranty card, purchase
receipt and packaging box for future reference. Please pay particular attention to the
safety information.
•Before commissioning this device please read the instruction manual
carefully.
•Please keep these instructions, the guaranty certicate . the sales receipt and, if
Possible .the carton with the inner packaging!
•The device is intended exclusively for private and not for commercial use!
•Always remove the plug from the socket whenever the device is not in use, when
attaching accessory parts, cleaning the device or whenever a disturbance
occurs . Switch o the device beforehand. Pull on the plug .not on the cable.
•In order to protect children from the dangers of electrical appliances, never leave
them unsupervised with the device. Consequently, when selecting the location
for your device. do so in such a way that children do not have access to the device.
Take care to ensure that the cable does not hang down.
•Test the device and the cable regularly for damage. If there is damage of any
kind. the device should not be used.
•Do not repair the device yourself, but rather consult an authorised expert
•For safety reasons a broken or damaged mains lead may only be replaced by an
equivalent lead from the manufacturer, our customer service department or a
similary qualied person.
•Keep the device and the cable away from heat, direct sunlight, moisture. sharp
edges and suchlike.
•Never use the device unsupervised! Switch o the device whenever you are not
using it, even if this is only for a moment.
•Use only original accessories.
•Do not use the device outdoors.
•Under no circumslances must the device be placed in water or other liquid, or
come into contact with such. Do not use the device with wet or moist hands.
•Should the device become moist or wet, remove the mains plug from the socket
immediately. Do not reach into the water.
•Use the device only for the intended purpose.
3
Cleaning and Care
•Use only cold water when lling.
•The water level must be between the MAX. and MIN. marks!
•Switch the machine o before removing it from the base.
•Always ensure that the lid is tightly closed.
•The base and exterior of the machine must not become wet
First Use of The Machine
Before using the machine for the rst time water should be boiled in it twice without
any additives.
1. Place the machine on a at surface.
2. Fill the kettle with water. Do not overll! Use the water level indicator.
3. Place the kettle ush on the base.
4. Electrical connection
•Check whether the electrical voltage that you intend to use is the same as
that of the machine. Details are to be found on the label on the base.
•Only connect the machine to a properly installed 230V 50Hz safety socket.
5. Switch the machine to position”1”.The control lamp on the water level indicator
shows that the water is being boiled.
6. After boiling the machine switches o automatically.
Disconnect the machine from the mains electricity supply.
Do not press up the lid when pouring.
Cleaning
Always remove the plug from the mains supply before cleaning the machine!
The exterior of the machine should be cleaned, if necessary, with a slightly damp
cloth without additives.
The calcium lter can be removed for cleaning.
power supply:220~240V ~50Hz 1850~2200W
4
Parts List
1 Handle
2 Lid opening lever (pull down to open)
3 Lid
4 Spout
5 Water gauge
6 Body
7 Power base
8 On/off switch
1
2
4
5
8
7
6
3
Loading...