Gurus Cicognani Boutique Series User Manual

preavviso. Questo prodotto osserva i requisiti delle Direttive Europee 89/336EEC Gurus Amps reserves the right to change technical features or look of his products in any moment without notice. This product
is pursuant to European Directives 89/336EEC
GURUS S.r.l.
Via Faentina n. 44 – 48013 Brisighella (RA) Italy
Tel/Fax +39 0546 620387 P.iva 02502120393
www.gurusamps.it – sales@gurusamps.it
USERS MANUAL
worldwide distribution by:
Power In
9 – 12 VDC max.
Consumption (normal conditions)
Max 230 mA
Max Consumption Peak at start (tube warm up)
<1A
Gain reduction
Up to 40db
Input Impedance
<1M Ohm
Input Level
1 Vpp max.
Distortion
<0,28% @+24db
Output Impedance
<100K Ohm
Output Level
+22db / +28db peaks
Frequency Response
20Hz - 20.000Hz +/- 0,8db
Tone filter
- 6db @4500Hz.
Magic Eye Meter
db Gain Reduction
Signal Noise ratio
<80db @max limiting
value
Tube type
12AU7/ECC82
Width
165mm.
Length
125mm.
Height
35mm.
Weight
0,6Kg.
GURU’S OPTIVALVE Tips
Optivalve may be used in several different ways. It can run as a pedal on your pedalboard, or used as studio outboard gear for your recording tracks, suitable for Guitar, Bass, Acoustic Guitars, and any other instruments. The followings settings are made with Optivalve in front of the amp, positioned at the end of the pedalboards chain.
SOFT LIMITING/ENHANCING:
Use this setting with the Optivalve in your pedalboard to give you the maximum headroom available by your amp without crunch its input.
Optivalve will enhance your soft touch, and limiting when you attack notes harder.
ACOUSTIC GUITAR::
Slightly open the Tone control to perfectly match the tone of your acoustic guitar, even with higher compression values. The Ratio control can be used fine tune how much you want the Optivalve to affect the dynamics of your signal. This setting maybe used in mix insert or on the stage Live to achieve the desired tone from your acoustic guitar.
Loading...
+ 2 hidden pages