Guoguang Electric VIFANORDIC3 User Manual

BUTTONS AND INDICATORS

BATTERY CHARGE CONNECTING WITH BLUETOOTH CONNECTING WITH BLUETOOTH WIRED CONNECTION WIRED CONNECTION SPEAKER PHONE SPEAKER PHONE

Answer/Terminate call

Mute/Pause

MODE button with
status indicator

1 2

3

14:52

Bluetooth

Bluetooth

Paired

4 2

1 3

Volume

Link button with
integrated indicator

Reset

Battery indicator

USB-C Charge Socket

AUX Socket

To charge, plug USB-C cable
in USB power adapter or
computer and connect to your
speaker. Light indicator shows
the charging progress.

*Please note that power adapter is not

included with the product. When not charg-

ing and battery level is below 5%, the battery

Above 80%

Between 15 and 80%

Between 5 and 15%

Below 5%

To turn Reykjavik on, press
and hold the MODE button
until status indicator turns
solid WHITE.

* To turn off, press and hold the MODE

button until the status indicator ashes

WHITE. Then release.

Press and hold the MODE
button until status indica­tor ashes BLUE.

Enable Bluetooth pairing
on your device and select
VIFA_REYxxxxxx as your
Bluetooth device.

*During music streaming, press the

Mute/Pause button to play/pause music.

The status indicator turns
solid BLUE when a con­nection is established.

To turn Reykjavik on, press
and hold the MODE button
until status indicator turns
solid WHITE.

Connect the wire,
( USB-C or AUX ) and
start music playback from
your device.

The status indicator turns
solid GREEN when wired
playback is enabled.

*During music streaming, press the

Mute/Pause button to Mute/Unmute

music.

Receive incoming call

The status indicator ash­es GREEN. Short press
the Answer/Terminate call
button.

Terminate a call

Short press the Answer/
Terminate call button again.

Reject incoming call

Long press the Answer/
Terminate call button.

Mute a call

During a call, short press
the Mute/Pause button
to mute or unmute the
microphone. The st atus
indicator ashes WHITE
when muted.

indicator will light up.

2017_03_16_Vifa Reykjavik_QuickGuide 1.8.indd 1 31/03/2017 14.29

IN THE BOX

LINK TWO REYKJAVIK SPEAKERS LINK TWO REYKJAVIK SPEAKERS REGISTER AND TRADEMARKS SPECIFICATIONS SPECIFICATIONS SUPPORT

Description

1x Reykjavik

USB-C cable

Safety instructions
and warranty

Quick guide

2017_03_16_Vifa Reykjavik_QuickGuide 1.8.indd 2 31/03/2017 14.29

1

Make sure the two Reykjavik
speakers are turned ON.

Press and hold Link button on
one speaker (bottom) until Link
indicator ashes YELLOW.

Repeat on the second speaker.

2

When both speakers are linked,
their Link indicators become
solid YELLOW, showing they
are linked as stereo speakers.

The Bluetooth ® word mark and
logos are registered trademarks
owned by Bluetooth SIG, Inc., and
any use of such marks by
Vifa Denmark A/S is under license.

Technical features

Inputs

Portable wireless loudspeaker

Bluetooth® Wireless Tech­nology
AUX 3.5 mm mini jack
USB playback
Lithium Ion battery

DSP crossover, optimized
for low distortionand high
precision
3 channel digital amplier
LINK two speakers

Speaker phone
(Incl noise/echo cancelling)

Bluetooth

AUX 3.5 mm mini-‐jack
USB-C

Tweeter

Woofer

Frequency response
Input voltage
Sleep mode
Automatic off

Battery, internal

Height/Diameter
Net weight
Grilles

2 X 19 mm Vifa drive units
with coated fabric dome
and neodymium magnet

70 mm Vifa drive unit with
aluminum cone and neodymium
magnet

62 Hz – 20 kHz @ +/- 3 dB
USB, 5V.
After 3 minutes without signal
After 30 minutes without signal

Lithium-Ion 19Wh

65mm/139 mm

0.5 kg
Custom made Kvadrat textile,
anodized aluminum

Support

If you experience issues that are not described
in this quick-guide, please refer to
vifa.dk/support for more information

Register your Reykjavik

We encourage you to register your speaker at

vifa.dk/support

2017 03 Rev.1.8

REYKJAVIK

Quick guide