GunVault GVB 3000 User Manual

DrawerVault Biometric

Model GVB 3000

User Manual

Patented Rev 1 (10/11)

Firearm Safety

WARNING: The DrawerVault Biometric safe or any other firearm storage device

cannot take the place of other safety procedures including advising children of the
dangers of firearms.

WARNING: The manufacturers and distributors of the DrawerVault Biometric safe do

not recommend, suggest, advise, promote or otherwise condone the ownership or
use of firearms. We at GunVault Inc. believe the decision to own or use a firearm is
a serious decision that should only be made by an adult who has carefully
considered the risks and benefits of such a decision.

WARNING: The keypad and push buttons on the control panel are electronic. They

have a certain feel to them and may seem different to different people. It is
important for you to become accustomed through practice, as to how the
DrawerVault Biometric safe responds to your own personal touch.

WARNING: Never mix alcohol or drugs with firearms or the DrawerVault Biometric safe.

Alcohol and other substances likely to impair normal mental or physical functions
should not be used before shooting or handling firearms or the DrawerVault
Biometric safe.

WARNING: Never grab your firearm by the trigger when removing or placing into the

DrawerVault Biometric safe. Make sure your firearm’s safety mechanism is on.

WARNING: Always point your firearm in a safe direction. Common sense should

dictate which direction is the safest.

WARNING: Always follow the firearm safety rules set out by the firearm’s manufacturer.
WARNING: Be familiar with how firearms work. GunVault recommends that you obtain

as much information as possible on firearm safety.

WARNING: Always handle firearms as if they are loaded and ready to fire. Always

assume that a firearm is loaded.

WARNING: In order to enjoy the maximum security benefits of the DrawerVault

Biometric safe product, it must be mounted in place using the equipment provided
with the product, according to the instructions provided herein. Use of this product
as a storage receptacle without mounting according to the instructions provided
herein, may compromise security of the DrawerVault Biometric Safe.

- 1 -

Understanding Biometrics

Biometrics are methods of authenticating the identity of a person based on
physiological or behavioral characteristics. Biometric fingerprint authentication
refers to technology that measure and analyzes human physical characteristics
for identification and authentication purposes.

Everyone is known to have their own unique individual fingerprints. The
individuality of each fingerprint can be determined by the pattern of ridges and
furrows on the surface of the finger as well as by the minutiae points. Minutiae
points are local ridge characteristics that occur at either a ridge bifurcation or a
ridge ending.

The biometric scanner is a sensitive device that requires care not to damage the
device. In addition, it is recommended that you practice the authentication
process several time in order to become comfortable with the process.

About DrawerVault Biometric

DrawerVault Biometric is the ultimate solution to complete access control.
Invented and developed by GunVault, DrawerVault Biometric provides safe
storage and easily controlled access for handguns, weapons, ammunition,
jewelry and other valuable items including: pharmaceuticals, coins, stamps,
stocks, bonds, critical data and personal documents. DrawerVault Biometric
requires no external computer or power to function. Flash memory retains
fingerprint data even during complete battery or electrical failure.

Shipped with your DrawerVault Biometric are the following items:

DrawerVault Biometric
Two backup keys
Instruction Manual

- 2 -

GETTING STARTED

NOTE: Set your keys to the side. Don’t lock them inside the safe!

Make sure to remove the backup key from the DrawerVault Biometric

before use and secure them.

The key is for emergency use only to unlock the case in the event of

fingerprint failure.

If the key is used to access the DrawerVault Biometric; it can only be

removed from the lock cylinder by returning the key back to its original
locked position.

Please do not try to remove the key in any other position or this may cause

damage.

Do not try to use the fingerprint scanner and electronic locking system

while the key is in the unit.

- 3 -