Gumstix Overo Conduit Setup Manual
Overo™ Conduit Setup Guide
Bring-up guide for GumstixrOvero LoRaWAN gateway board with
thethingsnetwork.org
Revised October 2, 2017
Overo™ Conduit Setup Guide
Gumstix, Inc.
© 2017
October 2, 2017
Contents
1 Introduction 1
2 Material 3
3 Setup 4
3.1 Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3.2 Disk Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3.3 Packet Forwarder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Appendices 7
A start_packet_forwarder.sh 7
1 Introduction
Figure 1: Overo Conduit LoRa gateway board
The Overo™ Conduit gateway development board from Gumstixris an Ethernet-connected expansion board for t he
GumstixrCOM. This board, combined with an Overo EarthSTORM™or AirSTORM™, and a RisingHF RHF0M301 LoRaWAN gateway/concentrator module, and sub-GHz antenna, acts as a Wide Area Network(WAN) hub for IoT devices.
The LoRaWAN topology allows for low-powered or battery-operated IoT devices to communicate with online applications
by way of Internet-connected gateways and concentrator modules, as shown in the figure below.
1
Loading...