Gumotex child car seat, GOBOOSTER Instructions For Use Manual
1
GUMOTEX, akciová společnost
Mládežnická 3A, č. p. 3062
690 75 Břeclav
Plant: Dongguan Yueli Toys Co.,Ltd,
China
Instructions for Use
User´s Manual
Inflatable child restraint system the GOBOOSTER child car seat (type BEDI)
The solution of the child restraint system of BEDI type (trade name GOBOOSTER) is
protected by the Czech patent No. 302787 and at the same time by the Community (industrial)
design No. 001860222-0001.
The owner of the patent and of the Community (industrial) design is the company
GUMOTEX, akciová společnost, Mládežnická 3A, č. p. 3062, 690 75 Břeclav
The child restraint system non-integral, approved according to the
Regulation UN ECE No. 44.04
Universal group for children with the weight (15 – 36) kg from the age of approximately 3
years and height up to 150 cm
It is designed for motor vehicle cars equipped with the adult safety-belts
which are approved according to the Regulation UN ECE No. 16
NOTICE
1. The universal child restraint system is approved according to the Regulation UN ECE
No. 44, series of amendments 04 for the common use in vehicles.
The length of vehicle safety belt at the older vehicles has not been checked and therefore it is possible to meet a vehicle in which the BEDI (trade name GOBOOSTER)
restraint system cannot be used.
2. The proper use can be expected provided the vehicle manufacturer declares in the
service instructions the possibility to mount the “universal” child restraint system in
the vehicle.
3. In doubts concerning the use or installation of the BEDI child restraint system consult
either the dealer or the manufacturer of the BEDI child restraint system directl
2
User´s Manual
Inflatable child restraint system – the GOBOOSTER child car seat
Table of contents
1! Important information .......................................................................................................... 3!
2! European standards ............................................................................................................... 4!
3! List of parts ........................................................................................................................... 4!
4! Notice for users .................................................................................................................... 4!
5! GOBOOSTER child car seat parameters ............................................................................. 6!
6! Weight and height of the child for which the GOBOOSTER child restraint system is
designed ...................................................................................................................................... 6!
7! Description of the GOBOOSTER child car seat .................................................................. 6!
8! Inflation and deflation instructions for the BEDI child car seat ........................................... 8!
9! Installation instructions and placement of the GOBOOSTER child car seat in a vehicle ... 9!
10! Basic adjustment of the GOBOOSTER child car seat for a transported child ................... 9!
11! Using of the adjusted GOBOOSTER child car seat and seating of the child .................. 10!
12! Risk factors ....................................................................................................................... 11!
13! Safety belts ....................................................................................................................... 11!
14! Airbags ............................................................................................................................ 12!
15! Further information and instructions ................................................................................ 12!
16! Unsuitableness of child car use ........................................................................................ 13!
17! Unpacking and packing the child car seat ........................................................................ 13!
18! Storage .............................................................................................................................. 14!
19! Maintenance ..................................................................................................................... 14!
20! Repairs .............................................................................................................................. 15!
21! Terms of delivery ............................................................................................................. 15!
22! Conditions of guarantee and lifetime ............................................................................... 15!
23! The guarantee and after guarantee service ....................................................................... 16!
24! Disposal of the GOBOOSTER child car seat and transport packaging ........................... 16!
25! Labels ............................................................................................................................... 16!
26! Guarantee certificate ......................................................................................................... 19!
3
1 Important information
Read up the manual carefully before first use of the GOBOOSTER child car seat.
The unique design of the inflatable GOBOOSTER child car seat enables the fast and easy
inflation and installation in the vehicle as well as the fast folding in packets with the
length of approx. 30 cm and diameter of approx. 12 cm.
- Design category: The child restraint system non-integral
- The Inflatable child restraint system – the GOBOOSTER child car seat is designed for
safe transport of children in a vehicle. The GOBOOSTER child car seat is classified
into the group II and III for children with weight of 15 kg to 36 kg to which the child
at the age of 3 years and the height up to 150 cm correspond.
- The GOBOOSTER child car seat is intended for the automobile seats equipped with
adult three-point seat belts which are approved according to the Regulation UN ECE
No. 16 or the Directive 77/541/EEC concerning the adult safety-belts as amended. The
adult safety-belts must be fastened in points, so-called clip anchorages which are
approved and tested according to the Regulation UN ECE No.14 or the Directive
76/115/EEC concerning the anchoring as amended. Any additional modifications of
safety seat belts for adults or anchorage points in
a vehicle are non-permissible.
- The child car seat has been manufactured in conformity with Regulation UN ECE No.
44.04 on the child restraint systems and it is approved in compliance with this
Regulation.
Dear customer,
this Manual will provide you with the easy, reliable and safe use of the GOBOOSTER
child car seat.
It contains description and entire information necessary for the right use and should be
placed near the seat to be always available.
The safety of your child depends on the careful reading out and understanding of the
Manual, the correct installation and the use of the GOBOOSTER child car seat.
Therefore you should study the manual carefully and pay close attention to all notices
and warnings. In any unclearness or misunderstanding of the text in the Manual contact
either the manufacturer or the dealer of the GOBOOSTER child car seat.
When reading the Manual, take the Manual of your vehicle. You may need it.
The GOBOOSTER child car seat is designed and adapted in order to protect the child in the
case of a sudden stop or accident. No chid car seat can guarantee the absolute protection from
injury at the accident however its use reduces this risk markedly.
The EC countries and the European countries have identical requirements in their laws for
using the child restraint systems. The use of the child restraint systems in the EC is obligatory.
The child restraint system in Europe must satisfy the Regulation UN ECE No. 44. The laws
specifying requirements for the child restraint systems of other than European countries may
differ. Contact the respective national institution or try asking your car dealer for additional
foreign information.
4
2 European standards
The legal regulations (laws) of European Union countries define uniformly the technical
requirements which the child restraint system must comply with. The child restraint system
must meet the Regulation UN ECE No. 44 and must be approved according to this directive.
Your child car seat has been approved according to the Regulation UN ECE No. 44, the group
No. II and III for children with the weight of about (15 – 36) kg from the age of three years
and the height up to 150 cm.
The approval mark (circle surrounding the E8) and authorization number beginning with
double digits 04 which is located below the approval mark are put on the child car seat and
must not be removed.
The child car seat may be used only in cars equipped with adult three-point seat belts
authorized on the basis of the Regulation UN ECE No. 16 or the equivalent Directive
77/541/EEC concerning the adult safety-belts as amended.
The adult safety-belts must be fastened only in points reserved therefore, in anchoring points
which satisfy the requirements of the Regulation UN ECE No. 14 or the Directive
76/115/EEC on the anchorage points of adult safety-belts as amended.
3 List of parts
The GOBOOSTER child car seat - one-side coated synthetic textile fabric, filling valve,
safety-relief valve, safety-belt holders, textile strap, metal tintacks, buckle – trident.
Attachment: User's Manual
4 Notice for users
WARNING
No child car seat can guarantee a 100% protection from injury. However, its proper use
reduces markedly the risk of injury or death to your child. Do not let others install the child
car seat who has not become acquainted with the instructions how to use the child car seat.
The installation of the child car seat has to be carried out by adults only.
Do not install the GOBOOSTER child car seat unless you have read and understood this
Manual.
It is important to fasten the child together with the GOBOOSTER child restraint system with
adult safety belt. The strap of the safety belt must not be twisted.
Pay your attention to location and installation of the child car seat.
The parts of child restraint equipment including plastic parts have to be installed so that they
cannot be caught up with the movable seat or a door of the vehicle during common use of a
vehicle.
The child restraint system must not move about of its own accord or get stuck in the vehicle
door.
5
Transport safety of your child is given by the quality of the GOBOOSTER child restraint
system and the adult three-point safety belt. It is convenient to use the GOBOOSTER child
restraint system and the adult three-point safety belt especially for children for whom the
child car seat adjusts the child height to the standard three-point safety belt, and further for
whom the installation of the seat with a child fastened by the adult safety belt is steady and
does not tilt up in turning during the vehicle drive.
If the child and the GOBOOSTER seat tilt up when the vehicle is passing a turning, it is
possible to set the strap of safety belt with which the child and the GOBOOSTER seat are
fastened in such a way that they are pressed more to the vehicle seat. In older cars at which
the three-point safety belt is not equipped with the automatic winding device, it is possible to
adjust the strap length and herewith fasten the seat and the child appropriately. The adult
safety belt strap with automatic winding device can be blocked by a jerk and it remains
blocked while it is kept in tension. The child and the child car seat may be fasted firm in a
vehicle and thereby the self-motion aside during the vehicle ride is prevented. If the firm
fastening is unpleasant for your child, then the GOBOOSTER child restraint system is not
suitable for your child.
Do not use other setups, configurations or arrangement of the GOBOOSTER child restraint
system and adult safety belt than those ones which are stated in this Manual.
Do not leave the child in the seat unattended.
Do not leave the unsecured child car seat in the vehicle. It can be thrown around and may
injure car occupants at braking, sudden change of travel direction or accident. Carry it either
folded in the luggage compartment or fasten it fast with blocked adult safety belt (the strap
must remain in tension).
Do not leave in a vehicle luggage unsecured against move. They may hurt the driver or fellow
traveller by inertial force when braking.
After an accident it is recommended to replace the child car seat. The accident may damage
the child car seat and cause damage or defect that you cannot see with naked eye.
Do not repair the child car seat anyhow and do not use spare parts of other manufacturers.
Do not use the child car seat if it is damaged or it is missing any parts.
Always touch by hand the surface temperature of the whole child car seat. Provided you park
in the direct sun, the child car seat can become very hot and contact with hot parts can burn
your child´s skin.
Do not lend the child car seat to anybody without also giving them these instructions for use.
Never use a second hand child car seat or any child car seat you do not know its history.
6
5 GOBOOSTER child car seat parameters
Control table
Length* (cm)
45 ±1,5
Width* (cm)
50 ±1,5
Height* (cm)
60 ±1,5
Orientation dimensions of folded product in textile casing:
Length (cm)
Diameter (cm)
30
12
Maximum operating pressure
7,1 kPa, 71 mbar, 1,03 psi
Maximum weight including accessory (g)
800
Maximum load (kg)
36
Maximum temperature range (°C)
-20 to +90
*
Dimensions are understood for inflated product
6 Weight and height of the child for which the GOBOOSTER child
restraint system is designed
Child parameters
Group
II
III
Weight (kg)
15 - 25
22 – 36
Age, height
(3 – 7) years, up to 150 cm
from 6 years , up to 150 cm
7 Description of the GOBOOSTER child car seat
The child car seat has been made from two basic parts – seat (1) and backrest (2) which are
connected after inflation into a single-chamber body anatomical formed for a seating child.
The inflation and deflation is carried out by means of the filling valve (3) located in the upper
rear part of the backrest.
The safety-relief valve (4) situated on the seat side part serves for the optimum pressure
regulation inside of the inflated child car seat. The valve prevents from overinflating the child
car seat during inflation or due to increased surrounding temperature.
The holders of seat belt strap (5) and (6) are designed for fixing the correct position of
fastening straps towards the transported child.
The holder of the upper strap can be adjusted in slots (8).
The holder is equipped with a fastening buckle “trident” (7).
The child car seat is delivered in the textile casing.
The homologation label (10), the manufacturer’s label (11) and visual fitting instructions (12)
are placed on the pocket (13) attached on the rear upper part of the backrest. The User’s
Manual is stored in the pocket. The red targets (14, 15) indicating the fastening strap paths of
the vehicle are located in the seat and backrest front side.
Loading...