Guizhou Areox Technologies G2MINI User Manual
PIRO MINIUser ManualV1.0
Disclaimer and warning
1、Summary
1.1：Introduction to PIRO MINI
1.2：Component recognition
1.3：Component function definition
1.4：PIRO MINI accessories
2、Installation
2.1：Battery installation
2.2：Mobile phone installation
2.3：Balance adjustment
3、Use
3.1：Handle function
3.2：Working mode
3.3：Connection mode
3.4：Charging treasure function
4、Areox Play APP
4.1：Download and installation
4.2：Connect with "AreoX Play" APP
4.3：APP interface introduction
5、Charging instructions
5.1：Charge For PIRO MINI.
6、Software and hardware upgrade
6.1：Upgrade method
7、Maintenance and use precautions
8、Technical parameters
9、Packing list
Production warranty card
PIRO MINI User Manual V1.0
Contents
1
PIRO MINI User Manual V1.0
Disclaimer and Warning
Thank you for purchasing our PIRO MINI robot. Please read this statement before using
this PIRO MINI for the first time, and once you have started using it, you are deemed to have
recognized and accepted the entire contents of this statement.
When you are using PIRO MINI Intelligent Photograph Robot, please do not adjust its
mechanical structure by yourself. In view of the Company's inability to control the use,
installation, assembly, modification (including the use of non-designated official parts) and
improper use, the Company will not be liable for any damages or damages arising from the
damage or harm caused by the above.PIRO MINI is an excellent video capture device that
prohibits any user from using it for any illegal use. The user will be responsible for any
purchase and use act of PIRO MINI, and the Company shall not provide any service for any
PIRO MINI obtained from non-normal channels.
There is a theme page about PIRO MINI on the official website of the Company. Through
the page, you can get the relevant introduction information about PIRO MINI and user
manual and video.
Please confirm that whether you are using the latest version of the manual according to
the version number. If not, please download and use the latest version of the manual. This
manual is subject to change without notice. If you encounter problems that cannot be solved
during installation and use, please contact us for help.
For details of this Statement, please refer to national laws and regulations. When this
Statement conflicts with national laws and regulations, the national laws and regulations
shall be prevailed.
1、 Summary
1.1: Introduction to PIRO MINI
PIRO MINI is an excellent capture and autostability mobile phone, equipped with high
precision of three axes PTZ, integrates advanced PTZ autostability algorithm. Through the use
of the equipment, users enable the mobile phone to capture the clear and stable image and
video in a moving environment.Products can be connected with "Areox Play" APP by
Bluetooth, and then achieve face recognition, target tracking, 9 square capturing,
180°/360°panoramic capture and other innovative capture features, making application
scenarios of the product more rich.
1.2: Component recognition
2
Mobile phone bracket
for adjusting and filling
Side screw peripheral
Mobile phone
Mobile phone
bracket locking
Used to smoothly and stably control the rotation direction and
1.3: Component function definition
SN Component
name
1.2 Pre fill light
Post fill light
3
support
4
knob
5.6.7 Motor
8 Mode indicator 1. Blue On: Horizontal lock mode (default).
9 Rocker Used to adjust the capture angle of camera device.
PIRO MINI User Manual V1.0
1. Pre fill light
2. Post fill light
3. Mobile phone support
4.
locking knob
5. Roll motor
6. Pitch motor
7. Heading motor
8. Mode indicator
9. Rocker
10. Mode button
11. Power indicator
12. Focusing and push rod
light
13. Photograph key
14. Record key
15. Charging port
16.
interface
17. Power switch
18. Battery bottom cover
19. Bottom screw peripheral
interface
20. Lanyard hole
Function description
Mobile phone clip is equipped with front and rear LED fill light,
multi-position is used to adjust the brightness of fill light, front
and rear fill light, convenient to capture under dark light.
Used to fix 4 to 6.3 inch intelligent mobile phone.
Through adjusting the phone bracket locking knob, you can open
or close mobile phone support, fix the mobile phone.
angle of mobile phone, keep capture autostable.
2. Green On: Three-axis lock mode.
3. Red On: fill light adjustment mode.
3
PIRO MINI User Manual V1.0
time pressing mode key can switch between different
time pressing mode key can turn off the phone
On: Power on or the charging for PIRO MINI is
push rod for
adjusting and
When the PTZ mode indicator is blue or green, adjust the
Battery bottom
Open the battery compartment bottom cover, you may remove
Bottom screw
1/4 screw interface used to connect with the base,
variety of protection functions and accurate
function, can
10
Mode key
In the case of a mobile phone connects with a PTZ Bluetooth:
Short-
modes. Long-
screen, you can press any key to wake up the screen again.
11 Power indicator 1. Green
completed.
2. Red On: PIRO MINI is charging.
3. Red flashing: PIRO MINI is low.
4. Yellow flashing: PIRO MINI enters the protection mode, press
any key to resume work.
12 Focusing and
handspike, you can adjust the focal length of the shooting screen
of the phone APP.
filling light
When the PTZ mode indicator is red, adjust the handspike, you
can open the front and rear fill light of the mobile phone clip, and
adjust brightness of the fill light.
13 Photograph key Press it to take pictures in real time.
14 Record key Press it to start to record and press it again to stop recording.
15 Charging port Charge the PIRO MINI by connecting with a dedicated charger.
16 Sidescrew
peripheral
interface
Normal 1/4 screw interface used to connect with the base, tripod
leg, bicycle support, vehicle support and other accessories, which
enable users to expand the demand for other accessories.
17 Power switch ON: turn on the power. OFF: turn off the power.
18
cover
19
peripheral
interface
or install the exclusive smart battery for PIRO MINI.
Standard
tripod leg, bicycle support, vehicle support and other accessories,
which enable users to expand the demand for other accessories.
20 Lanyard hole Used for the installation of lanyard.
1.4: PIRO MINI accessories
PIRO MINI products are equipped with a wealth of accessories by Mars Exploration, enable
that they can be used more convenient in a variety of occasions. Other related accessories,
such as: intelligent batteries, self-stabilizing base, clump weight, etc., can be selectively
bought through official channels.
Intelligent battery (standard)
PIRO MINI has specifically designed a capacity
of 980mAh intelligent battery for users, with a
intelligent power calculation
provide the battery life up to 8H.
Self-stabilizing base(optional)
4
PIRO MINI User Manual V1.0
The counterweight mounted on the pitch axis
is used to adjust the balance of the phone
assembly when the phone is seriously heavy.
Connected to the bottom of the PIRO MINI for
stably placing products, convenient to be used
in the case of living, family gatherings, meetings
or interviews.
Clump weight (optional)
and the horizontal roller shaft of the PIRO MINI
(Not required in a normal assembly)
2、 Installation
2.1: Battery installation
Before using the equipment, you need to install the standard intelligent battery. Open the
battery compartment bottom cover, push the battery into the battery compartment
according to the direction as shown, and then lock the battery compartment bottom cover to
ensure that the battery is steadily installed in the device. In order to protect the battery, to
prevent over-discharge, the battery before the factory are low-power state, before the use of
the product, please guarantee the battery is fully charged, which enables it return to normal
working state.
Battery specifications:
Battery type: Intelligent Battery.
Battery material: Lithium polymer (Li-Po)
Battery capacity: 980mAh
Battery energy: 10.8Wh
Charging ambient temperature: 5 ℃ -40 ℃
Use ambient temperature: 0 ℃ -40 ℃
Warning:
1. In the case that not used for a long time or in the transport state, be sure to remove the
battery from the product, to avoid transport or storage of the product with battery.
2. Before using the PIRO MINI intelligent battery, please strictly follow the attentions of the use
of intelligent batteries and disclaimers in the request, the consequences caused by users who
use the product against the requirements shall be assumed by users.
5
Loading...