6. ENVIRONMENTAL CERTIFICATIONS AND RECOMMENDATIONS ........................... 11
BTP02
Maximum output power
25 W peak power
Frequency response
50 Hz – 20 kHz
Transmission technology
Bluetooth® 3.0 et AD2P
Dimensions
249 mm (H) X 236 mm (W) x 171 mm (D)
Battery life
20 hours at 73 dB SPL @ 1 m
Features
- 1 auxiliary input (3.5 mm mini-jack format)
Battery
Rechargeable lithium polymer battery
Power supply
AC/DC 5 V - 2 A
1. INTRODUCTION
We thank you for your purchase of the Hercules WAE wireless speaker. It enables you to
listen to audio tracks stored on your iOS device or any other Bluetooth® device, and to
take your music with you anywhere.
1.1. Box contents
1 Hercules wireless speaker
1 power supply
User manual
1.2. Specifications
- 1 On/Off button
- 2 volume buttons
- 1 Bluetooth® pairing button
- 1 power supply connector
1.3. Overview of the speaker's front face
The speaker features the following buttons and indicators on its front face:
2/12 – User Manual
(1) Bluetooth® pairing indicator light:
- Flashes when the speaker isn't
connected to a device
- Lights up when the speaker is
connected to a device
- Flashes quickly when the speaker
is in pairing mode
(2) Volume + button
(3) Volume – button
(4) On/Off and connection status
indicator
(5) Battery charge level indicator
BTP02
1.4. Overview of the speaker's back face
The speaker features the following buttons and connectors on its back face:
(6) On/Off button
(7) Power supply connector
(8) Bluetooth® pairing button
(9) Auxiliary input connector
1.5. Safety instructions
- Place your speaker on a flat surface, to avoid the risk of the speaker falling.
- Never open up your speaker, as you risk damaging its internal components.
- This speaker is intended for use in a temperate environment.
- To prevent the risk of fire or electrical discharge, keep your speaker away from:
- rain or humidity, as well as all fluids (water, chemical products or any other liquids),
- sources of heat such as heaters, stoves or any other heat-producing devices
(including amplifiers),
- direct sunlight.
- Do not expose your speaker to drips or splashes of water.
- Never place any object filled with liquid (a glass, vase...) on your speaker.
- Completely disconnect your speaker if you do not plan on using it for an extended period
of time.
- Make sure that the speaker's power plug connected to an electrical outlet remains easily
accessible.
- Disconnect the speaker before cleaning. Use a damp cloth and avoid using aerosol
cleaners.
- Markings are located on the underside of the speaker.
- The speaker’s power plug serves to completely power off the device.
- Replace the speaker's power supply or accessories respecting the specifications of the
manufacturer or its authorized representative.
- This product contains no internal pieces which can be repaired by the user. Maintenance
must be carried out by the manufacturer or its authorized representative.
- Only use power supply listed in the user manual: GM12-050200-2 Adaptor (ratings:
Input: 100/240 VAC, 50/60 Hz, 0.5 A; Output: 5 VDC, 2 A)
WARNING: RISK OF EXPLOSION IF THE BATTERY IS REPLACED BY A BATTERY
OF AN INCORRECT TYPE. FOLLOW THE INSTRUCTIONS REGARDING THE
DISPOSAL OF BATTERIES.
User Manual – 3/12
BTP02
2. USING THE SPEAKER
2.1. Positioning the speaker
Indoors, the sound quality of the Hercules wireless speaker will vary according to its
placement in the room.
If you will be moving the speaker from room to room indoors, please keep the following
points in mind:
• To obtain the best possible sound, place the speaker on a shelf, a piece of furniture, a
desk or any other flat surface at a height of between 70 and 120 cm from the floor.
• You should ideally position the speaker near a wall, to enhance the bass response.
The further you position your speaker from the wall, the lower the bass level will be.
• When in operation, you should always position the speaker on its base: any other
position will result in reduced sound quality.
• Do not place the speaker in a narrow, enclosed space, as doing so will result in
reduced sound quality.
Outdoors, sound dispersion is greater and will result in reduced sound quality. To mitigate
the sound dispersion, place the speaker close to you.
2.2. Pairing a Bluetooth® device
"Pairing" means connecting a smartphone or a Bluetooth® device to your speaker, in order
to establish a communication. When two devices are paired, the relevant information is
stored in both devices' memory. Once a device has been paired with the speaker, it doesn't
need to be paired again.
The speaker can store information about up to 8 devices.
Step 1: Turn the speaker on, if you haven't already done so.
The Bluetooth® pairing indicator light should flash quickly. This means that the speaker is
in pairing mode.
If the pairing indicator light doesn’t flash, please refer to section 3, further in this manual.
4/12 – User Manual
Loading...
+ 8 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.