Guilin Feiyu Technology orporated VLOGPOCKET Users manual
Foldable Smartphone Gimbal
Overview
VLOG pocket is a three-axis handheld gimbal suitable for mobile phones. It is small and
foldable which can be folded into a pocket. The gimbal supports landscape and portrait
shooting, which can also control phone shooting.
10
12
17
9
13
18
14
16
1
2
*This product does not include the smartphone
11
7
5
8
13
4
6
3
15
User Guide
(1) Please fully charge the batteries before powering on the gimbal for the first time.
(2) If the power is too low, the red light will flash three times every five seconds, indicating
you should charge it immediately.
(3) When not in use, turn off the gimbal.
(4) Unlock the three clamp before powering on the gimbal.
(5) Landscape to install the phone.
1. Fold and unfold
Unfold
Fold
(1) Loosen the folding knob and tighten the knob after unfolding the
vertical arm.
(2) Unlock the three axis clamp.
(1) Lock the three axis clamp.
(2) Loosen the folding knob, and then tighten the knob
after folding the vertical arm.
Folded status Unfolded status
TIPS
3. Camera Installation
It is recommended to remove the protective cover of the smartphone before installation
and keep the extend port of the smartphone holder facing down.
Keep the extend
port facing down
Keep the smartphone
in center
4. Power on / off
Unlock the three axis clamp before powering on the gimbal.
Turn on the smartphone only after it is installed securely.
Power on :
when you hear the tone.
Power off :
when you hear the tone. (The red light will turn off)
Long press the function button and release it
Long press the function button and release it
(Green light will change to blue)
Long
press
Download the Feiyu ON App
* Requires iOS 9.0 or later, Android 6.0 or later.
Specifications
Max. Tilting Range 240°
Max. Rolling Range
Max. Panning Range 330°
Operation Time 5~8 Hours
Weight 272g
Payload 240g
Adapter
smartphones
165°
( Not including the smartphone )
IPhone and Android phones
( The width of the phone is between 42~88mm )
For More
Operation TutorialDetailed Manual More Downloads
iOS Version Android Version
Quick Start Guide
EN V 1.0
TripodMicro-USB Cable
1. Function button
5. Tilt axis 17. Extend port11. Roll axis clamp
7. Cross arm
9. Folding knob3. Shortcut button 15. Handle
12. Tilt axis clamp 18. Status indicator6. Pan axis
X1X1
13. Pan axis clamp
14. Micro-USB port8. Vertical arm2. Shutter button
16. 1/4 inch thread hole4. Roll axis 10. Smartphone holder
Unlock / Lock the clamp
Take the pan axis clamp for example.
Unlock state Lock state
2. Charging
Connect the USB cable to charge. The indicator
light is red when charging, and green when fully
charged.
5. Landscape and portrait shot switching
Double click the function button to switch modes between landscape and portrait.
Double
click
Double
click
D I S C L A I M E R
Prohibit any user for any illegal purpose. Users will be responsible for all behaviors of purchase and use products.
The Company assumes no liability for any risks related to or resulting from the debug and use of this product (including the direct,
indirect or third-party losses).
For any unknown sources of using, we will not be at any services.
The updating and changes of product firmware and program may cause changes in function descriptions in this user manual,
please read the instructions carefully before upgrading the firmware and use the corresponding user manual.
You can get the latest user manual from the official website: www.feiyu-tech.com
FeiyuTech reserves the right to amend this manual and the terms and conditions of use the gimbal at any time.
For more information, please visit our official website: www.feiyu-tech.com
Due to software and hardware improvements, your actual product might differ
from the descriptions and pictures in this user manual. You can get the latest
user manual from the official website.
FCC regulatory conformance：
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-Consult the dealer or an experienced radio/TV technician for help
NOTE: The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the user’s
authority to operate the equipment.
RF Exposure
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
Loading...