Guilin Feiyu Technology orporated RC01 User Manual

FY Wireless Remote Control InstructionsFY Wireless Remote Control Instructions
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Introduction
1
Product and Accessories
2
Wireless remote control buttons description
Receiver for wireless
remote control
Joystick
Tip:The Remote Control will be automatically powered off to save battery if there is no operation within three minutes.
EN
Version 1.0
Function Button
Wireless remote control Wireless remote control
Connect Wireless Remote Control
3
Receiver for wireless
remote control
Please install the receiver properly before power on!
Charging
Remote Control Distance
Match Code
Keep the gimbal powered on, restart the remote control and connect the receiver of RC to the gimbal, press the remote control function button for 7 times in 5 seconds, if the indicator on the RC flashes 5 times it means the receiver and the transmitter of RC match successfully, then customer can control the gimbal by the RC.
▲ RC needs to be match code whenever the following situations:(1)Connecting properly but still control in fail. (2)Change the receiver or wireless remote control.
Connect the Micro interface of wireless remote control with 5V charger by USB cable.
15 meters in an open environment.
USB Cable
Mini Port compatible with MG / G4S / G4 / G4 QD G4 Pro / G4 Plus
Micro Port compatible with WGS / WG
Mini Port
Function Interface
Micro Port
Function Interface
Steps to connect wireless remote control:
1
Open the wireless remote control.
Install the receiver for wireless remote control: Insert the receiver for
2
wireless remote control into the function port of gimbal .
3
Open the gimbal.
4
Use the wireless remote control to control the gimbal.
Tip:The Remote Control will be automatically powered off to save battery if there is no operation within three minutes.
Power on / off
Long press for 0.5 second
Long press for 3 seconds
ON
OFF
Operation
4
Please refer to the product manual wireless remote control operating instructions
DISCLAIMER
FY wireless remote control is a feature-rich wireless remote control device, yet lightweight
FY wireless remote control is a feature-rich wireless remote control device, yet lightweight
and portable.
and portable.
It is prohibited for any user to use the gimbal for any illegal purposes.
It is prohibited for any user to use the gimbal for any illegal purposes.
Guilin Feiyu Electronic Technology Co.,Ltd and our associates assume no liability for any
Guilin Feiyu Electronic Technology Co.,Ltd and our associates assume no liability for any
accident, injury, death, loss, or other claim related to or resulting from the use of this product.
accident, injury, death, loss, or other claim related to or resulting from the use of this product.
In no event shall Guilin Feiyu Electronic Technology Co.,Ltd and our associates be liable for
In no event shall Guilin Feiyu Electronic Technology Co.,Ltd and our associates be liable for
incidental or consequential damages relating to or resulting from the use of this product or
incidental or consequential damages relating to or resulting from the use of this product or
any of its parts. Damage resulting from use, accident, or normal wear and tear is not
any of its parts. Damage resulting from use, accident, or normal wear and tear is not
covered by our warranty.
covered by our warranty.
Guilin Feiyu Electronic Technology Co.,Ltd reserves the right to amend this manual and the
Guilin Feiyu Electronic Technology Co.,Ltd reserves the right to amend this manual and the
terms and conditions of this product at any time.
terms and conditions of this product at any time.
www.feiyu-tech.com
Please visit the official website of Feiyu Tech to get related information: www.feiyu-tech.com
Technical support:service@feiyu-tech.com
Loading...