Guilin Feiyu Technology SUMMON+ User Manual
User Manual
Publish in October 2016
GuiLin FeiYu Technology Incorporated Company
3-Axis Stabilized Handheld Camera
I Product Overview
II How to use Summon+
1. Function introduction of buttons and ports
2. Camera menu introduction
3. Introduction of photographing and shooting
4. Introduction of operating mode
5. LED indicator instructions
6. Reverse shooting
7. Firmware upgrade
8. Charging mode
9. Initialization
10. Operating example
III Product Parameters
EN
CONTENTS
1
2
2
3
6
6
7
7
7
8
8
8
10
[2] Dust cover
[3] Fill flash
[4] 1/4 inch screw hole
[5] USB port
[6] Hand shank
[16] Indicator
[15] Control connecting base
[14] Panning axis
[12] Cross arm
[13] Erecting arm
[11] Rolling axis
[19] Shutter
[21] Micro SD port( Excluding card)
[20] Microphone
[23] HDMI interface
[22] SD reading port
[18] Function button
[17] Joystick
[10] Tilting axis
[9] Camera back screen
[8] Photo / Video
switchover button
[7] Camera
[1] Camera lens
I Product Overview
Summon+ is a controllable all-in-one camera with 3-axis stabilization function. It has simple and
elegant structure and is easy to operate, the photographing and shooting are controllable so as
to take stable HD videos and pictures. It has realized some functions including fixed point
shooting, following shooting and time-lapse photography.
[5]
[6]
[4]
[3]
Tilting
310°
Rolling
310°
Panning
360°
[21]
[23]
[22]
[10]
[12]
[14]
[11]
[13]
[17]
[16]
[15]
[18]
[19]
[9]
[7]
[8]
[4]
1
Product Overview
1
[2]
[1]
[20]
II How to use Summon+
1. Function introduction of buttons and ports
1
Install battery
Power on:
Long press the function button until
the green light up, then release it to
turn on the gimbal.
Power off:
Long press the function button until
the red light always on, then release
it to turn off the gimbal.
If the battery power is too low,
the screen shall turn off automatically,
please long press the function button
for 3 seconds so as to make sure the
unit completely powers off.
Then you can recharge or replace
the battery.
Remove the hand
shank and insert one
22650 battery into it.
Single tap this button to switch
below Photo mode and
Video mode.
Long press this button to open
WiFi function, and long press
again to turn off WiFi function.
The default is Video mode.
The function button can
control power on or
power off.
2
Power on / off
!
Connect to a computer
with USB data cable so
as to read the video and
picture files in a SD card.
SD reading port
Connect with USB data cable by this
port to upgrade firmware or charge
the battery.
Please refer to “Firmware upgrade”
for the operation of firmware upgrade.
Please refer to “Charging mode” for
the charging mode.
USB port
How to use Summon+
Photo / Video
switchover button
Micro SD card *
(Equipped by users)
* Class10 high-speed micro
SD card is recommended
2
USB port
2. Camera menu introduction
Control the orientation
of camera lens
Control camera menu *
Switch working mode or access camera menu.
*
Triple tap function button to access camera menu,
the joystick can set the camera menu at this moment.
Please refer to “Introduction of camera menu” and “Introduction of working mode”
Function button
The video files are named as MOV_xxxxx.mov, for example, "MOV_00001.mov"
The picture files are named as IMG_xxxxx.jpgv, for example, "IMG_00001.jpg"
Single tap this button to start or stop photographing or recording.
In Photo mode, single tap this button to take a picture.
In Video mode, single tap this button to start recording, and press again to stop recording.
Double tap this button to turn on the fill flash, and double tap again to turn off the fill flash.
Shutter
Joystick
Joystick Camera lens
Up
Down
Left
Right
Down
Up
Left
Right
Joystick Camera menu
Up
Down
Left
Right
Upward selection
Downward selection
Return to the previous menu / Exit
Access the next menu / Confirm
How to use Summon+
Menu display in Video mode
White Balance
Timelapse
Timelapse Duration
Level Speed
Vertical Speed
AUTO
Media Playback
Movie Size
1080
Field Of View
Distortion Correct
ON
H
Slow Motion
OFF
OFF
OFF
Follow Setting
Date Stamp
Date & Time
OFF
Invert Mode
OFF
Language
System
Format
Wi-Fi-Password
EN
Timelapse
Timelapse Duration
Level Speed
Vertical Speed
OFF
OFF
Follow Setting
Invert Mode
Date Stamp
Date & Time
OFF
OFF
EN
Language
System
Wi-Fi-Password
Format
Menu display in Photo mode
Photo Burst
Media Playback
Resolution
16M
Field Of View
Distortion Correct
ON
H
Scheduled picture
OFF
OFF
Triple tap function button
to access camera menu
3
Loading...