Guilin Feiyu Technology SPG Plus Instruction Manual
GuiLin FeiYu Technology Incorporated Company
Instruction Manual
3-Axis Gimbal Rig for iPhone
iPhone 7 Plus / 7 / 6s Plus / 6s / 6 Plus / 6
iPhone SE / 5s / 5c / 5
1. Product Overview
Tilting
Indicator
Joystick
Bluetooth
shutter
USB port
Tilting
axis
Rolling axis
Handle
RollingRolling
Panning
360°
Panning
360°
1/4 inch
screw hole
1/4 inch
screw hole
1/4 inch
screw hole
1/4 inch
screw hole
1/4 inch
screw hole
* The showing smartphone
is only for reference
Function button
(ON / OFF)
Panning
axis
Indicator Status Mode / Status
Panning mode
Panning and Tilting mode
Lock mode / Initializing
Initialization failure / Malfunction
Blue light flashes once
Blue light flashes twice
Blue light constant on
Blue light keeps flashing
Blue light flashes for three limes Standby
Low batteryRed light flashes three times
Red light keeps flashing
Entering standby / Entering power off
1
Joystick
Joystick Camera lens
Up
Down
Left
Right
Down
Up
Left
Right
3
Bluetooth name: FY_SPGPlus_xx
Bluetooth Shutter
After connecting with bluetooth , the button can be used as shutter function and the gimbal indicator will blinks a green light
every 10 seconds.
Tips: Make sure the volume "+" key of your iPhone can control the shooting.
Connecting steps:
(1) Turn on the bluetooth of your iPhone. (2) Connect your iPhone with "FY_SPGPlus_xx".
(3) It can act as a mobile phone camera shutter after a successful connection.
Bluetooth pairing information clear: In boot-up state, long press the Bluetooth Shutter of the gimbal until the red light is
on to clear all the bluetooth pairing info. After clearing, iPhone paired previously need to ignore "FY_SPGPlus_xx" first,
then shutdown the Bluetooth of iPhone and reopen it to pair anew.
When you change your iPhone, please first shutdown Bluetooth of the previous one, then start Bluetooth pairing for the new one.
10 pieces of pairing info can be stored in this product.
4
Using App: You can perform various settings and operations via specified smartphone app("Feiyu On") when the bluetooth is paired.
You can using the function button to switch the
working mode, power on or power off the gimbal.
Please refer to “Modes / Functions”.
Function button
ON:
Long press Function Button and release it until the
green light is on.
OFF：Long press Function Button and release it until the
red light changes from quick flashing to constant.
2
1
3
2
4
Loading...