296x182mm 四折页
1
6
4
12
2
7
3
11
8 9
13
18
3.2mm 2.3mm
10
14
15 16 19
5
17
SS20GACC
To reduce the risk of injury, user must read instruction manual.
To reduce the risk of injury, always use dust masks, always use safety glasses.
OPERATION
Locating a cutting/sanding disc
Locating a sanding drum
2
of the cutting disc, then insert
the screw.
1 Loosen the screw on the top
of the sanding drum holder.
3 Tighten the cutting disc
onto the cutting disc holder.
2 Slide the sanding drum onto
the sanding drum holder.
1 Remove the screw
from the end of the
disc holder.
Note: Do not over-tighten the screw as it could result in damage
to the cutting disc.
3 Tighten the screw until
the sanding drum
sleeve is secured.
Note:Each number settings listed in the speed charts=000RPM'S
Functions
Sanding
Cutting
Grinding/
Sharpening
Carving/
Engraving
Drilling
Cleaning/
Polishing
Collets/
Miscellaneous
Images
Accessory
Description
Sanding disc
Sanding drum sleeve
Fiberglass cutting disc
Cut off wheels
Grinding disc
Silicon carbide grinding
wheels with shank
Aluminum oxide grinding
wheels with shank
Rubber emery wheel
Diamond bit
HSS cutter
HSS drill bit
Brushes
Felt wheels/cloth wheel
Collets
Wrench
Whetstone
Mandrel
Mandrel
Cork
10-20
10-25
--
--
--
--
--
--
15-32
15-32
25-32
10-20
15-25
Hardwood
10-21
10-26
--
--
--
--
--
--
15-32
15-32
25-32
10-20
15-26
Plastic
10-22
10-27
--
--
25-32
25-32
25-32
--
15-32
15-32
25-32
10-20
15-27
Steel
--
10-28
25-35
25-35
25-32
25-32
25-32
15-25
15-32
--
--
10-20
15-28
Aluminum,
brass, etc.
10-22
10-29
25-35
25-35
25-32
25-32
25-32
15-25
15-32
--
--
10-20
15-29
Shell,
stone
--
10-30
--
--
25-32
25-32
25-32
--
15-32
--
--
10-20
15-30
Ceramic
--
10-31
--
--
25-32
25-32
25-32
--
15-32
--
--
10-20
15-31
Glass
--
--
--
--
--
--
--
15-25
15-32
--
--
10-20
15-32
Suitable for shank size 2.3mm, 3.2mm
Fixing the attachments and collets
Adjust the concentricity of grinding wheels to keep them in good condition
To assemble with rubber emery wheel/sanding disc/cut-off wheels/grinding disc/fiberglass cutting disc
To assemble with felt wheel/cloth wheel
Sanding drum
Mandrel for hitching sanding drum sleeves
Cutting
Cleaning / Polishing
Grinding / Sharpening
Sanding
Carving / Engraving
Drilling
Collets / Miscellaneous
Produced in China for Argos Ltd,
489-499 Avebury Boulevard,
Milton Keynes, MK9 2NW.
www.argos.co.uk/guild
ADJUSTABLE STORAGE
COMPARTMENTS
SS20GACC
1. Sanding disc (320grit)
2. Sanding drum sleeve
(8x12.7mm, 8x6.35mm)
3. Grinding disc (20mmx3mm)
4. Rubber emery wheel
(22mmx3.6mm)
5. Grinding wheels with shank
(shank dia.: 3.2mm)
6. Cut-off wheel (24mmx0.6mm)
7. Fiberglass cutting disc
(32mmx1.2mm)
8. Diamond bits (shank dia.: 3.2mm)
9. HSS drill bits (φ2.3mm, φ3.2mm)
10. HSS cutter (shank dia.: 3.2mm)
11. Felt wheels
12. Cloth wheel
13. Brush (shank dia.: 3.2mm)
14. Whetstone
15. Mandrel (assemble with sanding
disc, cut-off wheel, grinding disc,
fiberglass cutting disc)
16. Mandrel (assemble with felt
wheel)
17. Sanding drum (assemble with
sanding drum sleeve)
18. Collets (2x3.2mm, 1x2.3mm)
19. Wrench (see operation)
40PC
16PC
12PC
1PC
6PC
36PC
5PC
5PC
4PC
1PC
6PC
1PC
2PC
1PC
2PC
1PC
2PC
3PC
1PC