MIFARE Optical Reader Module Specifications
Beautiful Security
G U E S T K E Y
Autonomous Operation Mode
Memory capacity:
-36K SRAM
-256KB FLASH
- 4 KB EEPROM
Supported RFID standards
Read/write mode supporting:
-ISO/IEC 14443A/MIFARE
-ISO/IEC 14443B
-JIS X 6319-4 comparable with FeliCa
-ISO/IEC 15693
-ICODE EPC UID/ EPC OTP
-ISO/IEC 18000-3 mode 3/EPC Class-
1HF
Passive initiator mode according to ISO/
IEC 18092
Status
-Multi-colour LED status indication (1
RGB, 3 Red, 1 Green, 1 Orange)
Mounting
-Indoors
Connections
-All connections are made with 8P8C
(RJ45) plug.
-Maximum terminal load: 0.5A
RS-485 Autonomous Bus (1)
-1 Channel half duplex
-Not galvanically isolated, differential.
-8 data bits, even parity, 1 stop bit
-Terminating resistor for bus or star wir-
ing (jumper)
RS-485 System Bus (2)
-1 channel half duplex
-Not galvanically isolated, differential.
-8 data bits, even parity, 1 stop bit
-Terminating resistor for bus or star wir-
ing (jumper)
Power supply
-17-26VDC, absolute max.4.8W
-Without power supply, the clock contin-
ues to run for up to 240 hours.
Battery
- 3.6V 350mAh NiMH (Rechargeable
Nickel Metal Hydride)
-Battery type EMMERICH NIMH AKKU 1/2 AAA 280 MAH FT-1Z (Part no.
255008) or Vapex Tech NiMH 3.6V Battery Pack
- Maintains autonomous operation during
power-loss for up to 8 hours
Tamper Switch
-Detects removal of cover plate
Mechanical
-Dimensions: 69.8 x 48.3mm (w x h),
Min. wall depth 42.3mm
-Housing: V0 Flame retardant clear polycarbonate with label
-Connector type 8P8C (RJ45 V0 housing)
-CAT5e/CAT5 cable, maximum length
100m
-Weight with battery Approximately 75
grams
Environmental
-Operating temperature: -30 to +85 C
-Storage temperature: -30 to +85 C
-Relative humidity: 0 to 95%
Non-condensing
-Protection type: IP20
Standards and directives
-FCC CFR 47 Part 15B, 15C:2016
-FCC CFR 47 Part 2.1093
Part number
-GKMR1000-4001