Guerrilla Gravity Pedalhead Owner's Manual

Owner’s Manual

Contents

• Assembly

– Frame fittings
– Fastener torque
– Fork compatibility
– Drivetrain

• Setup

– Suspension sag, air volume spacers, and damper

settings

• Maintenance and Small Parts

• Safety

Assembly – Frame Fittings

– Headset: EC44/40 lower, ZS44/28 for tapered steer tube

– BB: Standard 73mm BSA threaded

– Seat post: Ø31.6mm or Ø30.9 with shim, Clamp: integrated weld-on,

stealth dropper post routing compatible

– Rear hub: 12x148, offset 3mm to the drive side

– Chainring: Up to 34 teeth, Chainline: 55mm

– Rear brake mount: International Standard

– Integrated beverage tool: International Standard

Assembly – Fastener Torque

Seat Binder

• Tighten to 10 Nm (7 lb-ft, 90 in-lb) (5mm hex)

Assembly – Fastener Torque

1. Rear Axle

1. Pinch bolt holds axle nut insert and derailleur hanger; to remove rear wheel, only loosen axle head

2. Tighten to 10 - 16 Nm (7 – 11 ft-lb)

2. Derailleur Hanger

1. The pinch bolt clamps the nut insert and attaches the derailleur hanger

2. Tighten pinch bolt to 10 Nm (7 lb-ft, 90 in-lb) (5mm hex)

1

2