Gudsen Technology AIR User Manual

User Manual

Product Name: Handheld Gimbal

Model: AIR, AIR-360, AIRCORSS

Brand: MOZA

Manufacture: Gudsen Technology Co., LTD

A Packing List

Gimbal x 1 Handgrip x 1 26350Battery X3 Charger X 1

Tripod （Optional）

Handle Bar X 2

Control Cable X 3 USBCable X 1 AC Cable (Adapter) X 1 User Manual X 1

BMOZA Air

Tilt Adjustment Arm

Tilt Motor USB Output

Tilt Adjustment Screw

Camera Holder

Lens Support Lock-knob

Lens Support

Roll Adjustment Screw

Yaw Adjustment Arm

Yaw Adjustment Screw

Yaw Motor

Battery Handgrip
1/4“ Screw

CButtons&Ports

Wireless Thumb

Controller （Optional） Lens Support X 1 Lens Support Screw X1

Side Handle X 2

Handle Clamp X 1 Tool Bag

Roll Motor

Roll Adjustment Arm

Camera Lock-knob

Micro USBPort

Joystick

On/off Button&Indicator

On/Off button： Single Press: Start/Stop recordingDouble Press: Undefined

Joystick： Up\Down\Left\Right：Control the gimbal movements

USB Input：Adjust parameters；Upgrade firmwareUSB Output：Control camera recording

DSet up the MOZA Air

1. Charging Batteries.

Battery charger comes with 4 slots, each slot packs one piece of 26350 battery to charge

at the same time. Make sure the positive terminal is facing the charger indicator.

Charging starts when indicator changes to red after installation， the charger indicator

Turn to green when the battery is full of electricity.

2. Install Batteries.

Insert three 26350 batteries into the handgrip. Make sure the positive terminal is facing upwards.
Then screw the handgrip to the gimbal.

3. Mount the Camera.

Lay the gimbal horizontal, resting on it the roll motor as shown. Place the camera on the camera mount platform.
Align the camera’s ¼ mount by passing the 1/4''camera lock-knob through the camera mount platform.Tighten the
camera lock-knob to secure the camera.
Smaller cameras should choose the closest track to the tilt motor such as A7s. For larger bodied cameras the further
track from the tilt motor, such as Canon 5D.

Triple Press: Re-centerLong Press: Turn on/off

Single Press: Yaw-follow Double Press: Yaw-tilt follow Triple Press:All-locked
Long Press: StandbySingle Press in Standby Mode: Awaken the gimbal

+

-
+

­+

-