Gude Profi 2500 User Manual
Profi 2500
#
9413
1
D GB F DK
CZ SK
NL
I
NOR S
Güde GmbH & Co. KG
Birkichstraße 6
D-74549 Wolpertshausen
www.guede.com
Güde Scandinavia A/S
Engelsholmvej 33
DK-8900 Randers
www.guede.com
GÜDE Slovakia s.r.o
Podtúre!-Rove! 208
SK-033 01 Liptovský Hrádok
www.guede.com
Güde Hungary Kft.
Kossuth L. út 72
H-8420 Zirc
www.guede.com
Güde Czech, s.r.o.
Po"ernická 120
CZ-36005 Karlovy Vary
www.guede.com
GB
2
List of Contents
Description Page
1. Parts Description ......................................................................................................................................2
2. Technical Data ......................................................................................................................................... 2
3. General Safety Precautions .....................................................................................................................3
3. Assembly..................................................................................................................................................5
4. Grinding Disk Check................................................................................................................................. 6
5. Grinding Disk Assembly ........................................................................................................................... 6
6. Clamping Screw Set Up ........................................................................................................................... 7
7. Grinding.................................................................................................................................................... 7
8. Grinding Depth Delimiter..........................................................................................................................8
10. Dimensions............................................................................................................................................... 9
9. Assembly Drawing.................................................................................................................................. 10
10. List of Spare Parts..................................................................................................................................11
1. Parts Description
2. Technical Data
Profi 2500
Supply voltage:
230 Volt/50 Hz
Motor input power:
P1 230 Watt
Maximum speed:
3400 rpm
Noise level:
< 70 dB (A)
Weight:
ca. 5,8 kg
Product No.: 94131
1
2
3
4
5
16
15
10
8
6
7
9
12
13
14
11
1. handpiece
2. grinding disk lateral guard
3. depth of grind set screw
4. cutting edge angle set-up wheel
5. base
6. screw clamp cradle
7. cutting angle setting wheel
8. scale
9. clamping lever
10. mean distance set screw
11. guide flap valve
12. screw clamp
13. guide position set screw
14. setting screw
15. grinding disk
16. grinding disk protective enclosure
GB
3
3. General Safety Precautions
Read the instruction manual carefully before the first use of the machine. If any doubt regarding the
connection and operation of the machine arises, seek the manufacturer’s assistance (servicing department)
Protect the machine from moisture, rain and dust.
FOR US TO SECURE THE HIGHEST DEGREE OF SAFETY, CONFORM TO THE FOLLOWING
INSTRUCTIONS:
- Use the machine only for the scope of work it has been designed for !
- When using the saw-chain grinder outdoor, you should always use a weather resistant extension cable
to connect it of a minimum diameter of 1.5 mm2 with the splash-proof plug and socket.
- The noise level in the working area is above 85 dB (A). Therefore, wear ear protection – hearing loss is
imminent!
- To protect your health at a grinding job, always use a dust protection mask and protective goggles!
- Always unplug the machine before any work on the machine (cleaning, grinding disk replacement etc.)
- Take care to have the saw-chain to be ground secured as appropriate for it not to slip out.
- It is your own interest to keep your machine clean at any time and after you finish a grinding job, check
the machine for damage.
- Always keep your saw-chain grinding machine clean. .
- Do not use any caustic to clean the plastic parts.
- Do not use the machine and do not work on it in proximity of inflammable liquids and vapours thereof. .
- Unplug the machine any time you replace a part or clean the machine.
- Protect the power cable from any damage the cable may be damaged by oil or acid.
- Important notice! Observe any national safety regulations regarding installation, operation and
maintenance .
- Upon having completed the job, unplug the saw-chain grinding machine from the mains.
- Protect your yes and colleagues from jumping particle and chips.
- Working gloves will protect your fingers and skin from cutting injuries.
- Always carry the power cable to the machine from behind.
- Store the machine in a place inaccessible to children.
- Always hold the machine with both the hands when working and mind safe footing and posture.
CAUTION!
Abide by the essential safety measures of protection from electric shock, accident and fire prevention.
Read all these instructions before you get down to the use of the electric machine and follow them. Keep
the safety instructions at a safe place for future reference .
Safe Work
- Keep your workplace tidy.
A messy work place may cause an accident.
- Always make allowances for the environmental effects. Do not expose the electric tools to rain. Do not
use them in moist or wet areas. Take care of sufficient lighting. Do not use them in proximity of
flammable liquids or gases.
- Get protected from electrical shock. Avoid any bodily contact with grounded objects (such as pipes,
radiators, stoves and refrigerators).
- Prevent the children from access.
Do not let other person to touch the machine or the cable. Prevent any unauthorised persons from
access to the working area.
- Store the machine at a safe place. When off the use, the machine should be kept at a dry, elevated
locked place out of the reach of children.
- Do not overload the machine.
Work better and in a safer manner within the scope of capacity as given.
- Use the correct machine. Do not use a machine of lower capacity for heavy jobs. Do not use the
machine for any purpose it has not been intended for. Only use the machine for the purposes
described in the instruction manual!
GB
4
- Wear proper working clothing!
Do not wear any wide garments and jewellery that might be caught by the moving machine parts. For
working outdoors, rubber gloves and non-skid shoes are recommended. If your hair id long, wear a
hairnet. Use protective goggles.
- Wear a breathing mask when engaged in a dust-producing job.
- Do not use the cable for any purpose it has not been designated for.
Do not use the cable for carrying or hanging of the machine. Do not use the cable to pull out the plug
from the socket. Protect the cable from excessive temperatures, oil, and sharp edges.
- Avoid any abnormal posture. Mind safe footing and keep balance at any time
- Take due care of your machine.
Abide by the maintenance and grinding disk replacement regulations.
Check the machine cable regularly and when it is found to be damaged, have it replaced by a skilled
electrician. Check the extension cables regularly and replace them if damaged.
Keep the handle dry, free of any dir, oil and grease.
- Unplug the machine, if it is out of use, prior to the maintenance and tools replacement, e.g. grinding
disk.
- Remove any spanners from the machine.
Before switching on, check to see that any wrenches and adjustment tools were removed.
- Avoid an unintended switching.
Use only permitted and properly marked extension cables for working outdoors.
- Be attentive. Mind what you are doing. Get down to a job only when feeling good. Never use the
machine when distracted.
- Check the machine for possible damages.
- Before using the machine, you should check any protection devices and any parts showing slight
damage to see that the function intended is perfect. Check to see that the moving parts move freely,
do not drag and are not damaged. Any parts should be installed properly to comply with the conditions
of the machine safe operation. Damage protection devices and parts should be repaired in a
recognised professional workshop and replace unless the instructions for use specify otherwise.
Damaged switched should be replaced by the customer service workshop. Do not use a machine
with a defective ON/OFF switch.
CAUTION!
Always connect the machine via fault current circuit breaker (FI). This machine is in compliance
with any respective safety provisions. Any repairs shall be done by professionally qualified
persons and only genuine spare parts should be used. The provision not being observed, the
operator is in a risk of injury.
Loading...