Gude Expert Bypass Switch 8701, Expert Bypass Switch 8701-1, Expert Bypass Switch 8701-2 Series Manual

Expert Bypass Switch 87 01

© 2016 Gude Analog- und

Digitalsysteme GmbH

Manual Ver. 1.0.1

Manual

3

Expert Bypass Switch 8701 © 2016 Gude Analog- und Digitalsysteme GmbH

Table of contents

1. Device De scription 4

1.1 Secu r ity A d vice .............................................................................................................. 5

1.2 Conten t of Deliv er y ........................................................................................................ 5

1.3 Description ..................................................................................................................... 5

1.4 Installation ...................................................................................................................... 6

1.5 Techn ical Sp ec ifi c at i o n s ................................................................................................ 8

2. Operating 9

2.1 Opera t ing t h e d ev i c e ................................................................................................... 10

3. Support 11

3.1 Contact .......................................................................................................................... 12

3.2 Declarat i o n o f Con formity .......................................................................................... 13

0

Index

Device Description

5

Expert Bypass Switch 8701 © 2016 Gude Analog- und Digitalsysteme GmbH

Device Descript ion

1 Device De scription

1.1 Security Advice

· The device must be installed only by qualified personnel acc ording to the following in­stallation and operating instructions.

· The manufacturer does not accept responsibility in c as e of improper use of the device
and particularly any use of equipment t hat may c aus e personal injury or material dam­age.

· The device contains no user-maintenable parts. All maintenance has to be performed
by factory trained service personnel.

· This device contains potentially hazardous voltages and should not be opened or dis­assembled.

· The device can be connected only to 230V AC (50 Hz or 60 Hz) power supply s oc k ­ets.

· The power cords, plugs and soc k et s have to be in good condition. Always connect the
device to properly grounded power sockets.

· The device is i ntended for indoor use only. Do NOT install t hem in an area where ex­cessive moisture or heat is present.

· B ec ause of safety and approval is s ues it is not allowed to modify the device without
our permiss ion.

· P lease note the s afety advi s es and manuals of connect ed devic es , too.

· The device is NOT a toy. It has to be used or stored out or range of children.

· Care about packaging material. Plas t i cs has t o be s t ored out of range of children.

Please recycle the packaging materials.

· In case of further questi ons, about installation, operation or us age of the device, which
are not c lear after reading the manual, please do not hesitate to ask our support team.

· P lease, never leave connected equipment unattended, that can caus e damage.

· Connect only electrical devic es that do not have limit ed on-time. I.e. in c ase of failure,

all connected appliances have to cope with a continuous on-time without causing
damage.

1.2 Content of Delivery

The package includes:

· Expert Bypass Switch 8701

· CD-ROM with Manual

1.3 Description

The Expert Bypass Switch 8701 is a m ec hanical by pass switch for uninterrupted re-
placement of UPS systems

· Uninterrupted replacement or maintenance of UPS sys tems t hrough selection switch
without shutdown of connected loads

· S witch position „Netz“: Connected loads are operated with mains voltage directly