Gucci STANDARD WATCHES Instructions For Use Manual

INSTRUCTIONS FOR USE

STANDARD WATCHES

2

Instructions for watches with quartz movement

Quartz 2 hand

Normal running position: crown in position I, against the case.

Setting the watch time: pull out the crown to position II and turn it clockwise
or anti-clockwise to the desired time.
Push the crown back into position I.

Instructions for use

3

Quartz 2 hand with date

Normal running position: crown in position I, against the case.

Correcting the date: pull out the crown to position II and turn it clockwise or
anti-clockwise until the desired date is displayed.
Push the crown back into position I.

During this operation, your watch will keep running, so the time does not
need to be corrected.

Setting the watch time: pull out the crown to position III and turn it clockwise
or anti-clockwise to the desired time.
Push the crown back into position I.

Make sure that the date changes at midnight, rather than at midday.

NB: do not correct the date between 8 p.m. and 2 a.m. because this may
damage the movement.

4

Quartz 3 hand with date

Normal running position: crown in position I, against the case.

Correcting the date: pull out the crown to position II and turn it clockwise or
anti-clockwise until the desired date is displayed.
Push the crown back into position I.

During this operation, your watch will keep running, so the time does not
need to be corrected.

Setting the watch time: pull out the crown to position III, the second hand will
stop: turn it clockwise or anti-clockwise to the desired time.
Push the crown back into position I.

Make sure that the date changes at midnight, rather than at midday.

NB: do not correct the date between 8 p.m. and 2 a.m. because this may
damage the movement.

5

Clock

Crown A - Alarm setting: pull out the crown A to position II, turn it clockwise

to the desired alarm time.

Alarm ON: pull out the crown A to position II, the alarm is engaged.

Alarm STOP / OFF: push the crown A to position I, against the case, the
alarm is disengaged.

Crown B - Time setting: pull out the crown B to position II, turn it clockwise
to the desired time.

Push the crown B back into position I, against the case.

Normal running position: crown B in position I, against the case.

B

A