Guard RFID Solutions AT5 User Manual

Guard RFID Solutions Inc.

Fax: [phone]

‐

Cet appareil est conforme à la spécification RSS-210

FCC ID: VZKAT5

Article Tag 5

AT-5BLF

FEATURES:

• Small, lightweight, and low profile for unobtrustive installation

• Adhesive mount can affix tag to most flat surfaces, including metal

• Long battery life—up to 24 months operation

• Integrated motion sensor for detecting unauthorized transit

• Integrated temperature sensor for monitoring asset temperature

• Integrated tamper sensor for detecting unauthorized or accidental removal

• Waterproof and easy to clean

DESCRIPTION:

The AT-5BLF Active Label is an RFID tag used for locating, tracking, and protecting equipment
and other assets that require an ultra-low profile tag with a small footprint. The tag can be mounted
to almost any flat surface, including metal surfaces, using a double-sided adhesive label, without
significant degradation in performance.

The tag regularly transmits beacon messages using its UHF transmitter, which are received by
GuardRFID Tag Readers. Argus Server process the tag transmissions to generate presence and
long-range location data. Tags also contain a low-frequency receiver that instantly detects LF
fields generated by GuardRFID Exciters installed at critical security zones or other locations of
interest.

The tag has an integrated motion sensor that can be used to trigger alarms on movement, and
which increases the beacon rate when the tag is in motion. A temperature sensor allows
monitoring of ambient temperature between -30º to +50º Celsius.

The AT-5 tag features an optical tamper sensor on the underside, enabling it to detect and alert
users when it is detached from its asset. Use the tag to protect high-value assets that may be
targeted for theft with the knowledge that thieves cannot remove the tag without rais ing an alarm.

PRODUCT INFORMATION

[e-mail]

Tel: [phone]

IC ID: 9937A-AT5

02-00120-101 Specifications subject to change without notice. © 2018 Guard RFID Solutions, Inc.

SPECIFICATIONS:

Part Number 61-10510
Transmit Frequency 433 MHz
Receive Frequency 125 KHz
Battery Life 12 months at 65% motion / 24 months at 5% motion

Beacon Interval 12 sec in motion, 10 min static
Sensors Motion, Temperature, Tamper

Dimensions 40mm x 32mm x 6mm (1.60” x 1.26” x 0.23”)
Weight 6g (0.2 oz)
Operating Temperature -30˚C to 50˚C (-22˚F to 122˚F)
Humidity IP68
Regulatory FCC, IC, CE, UL-294
Warranty Prorated over a maximum term of 12 months

FCC Disclaimer:
This device complies with part 15 of the FCC Rules and with Industry Canada license

standard(s). Operation is subject to t he following two conditions: (1) This device may not cause
harmful interference, and (2) This devic e m ust accept any i nterference received, including
interference that may cause undesired operati on.

NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE
CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT SUCH MODIFICATIONS
COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

exem pt RSS

d'Industry Canada. Son fonctionnem ent est soum is aux
deux conditions suivantes:
(1) cet appareil ne peut engendrer aucune interférence et
(2) il doit accepter toute interférenc e qu'il r eç oit, y compris
celles qui peuvent altérer son fonctionnement