1.866.603.5900 or log on to www.guardiantechnologies.com
B
C
E-1
Page 2
Page 3
Control Panel
PRODUCT PARTS
Carrying
Handle
AIR CLEANING SYSTEM
Improve your indoor air quality with your new Germ Guardian® Air Cleaning System.
Multiple levels of cleaning include a combination filter that captures allergens, and
Charcoal filter to remove odors. UV-C light technology enhances germ-killing.
PRE-FILTER*
Captures initial dust and allergen particles.
Air Outlet
Base
Air Inlet
Unit Body
FRONT OF UNITBACK OF UNIT
CONTROL PANEL
-C Bulb Button/
UV
Power Knob
Filter/UV Bulb
Reset
Lock & Release
Button
(for accessing
Filter and Bulb)
Filter
Access
Cover
CHARCOAL FILTER*
Contributes to the control and prevention of the growth of bacteria, germs and mold.
FILTER
Reduces allergens.
UV-C LIGHT
UV-C light technology works with filters to enhance the elimination of airborne germs
Titanium Dioxide is activated by the UV-C light to decompose remaining odor molecules
caused by smoking, cooking and pets.
*Pre-Filter and Charcoal Filter are combined into one layer that attaches to the Filter.
AIR CLEANING LAYERS
AC4825 SERIES
Lock & Release
Button
UV-C
Bulb
UV-C
Metal
Shield
Power Indicator/
Change Filter Indicator
Main Unit
Combination
Filter B
includes Pre/
Charcoal &
filter
Rear Cover
with Air
Inlet Grill
E-5E-4
Page 4
AIR CLEANING LAYERS
INSTALLING & REMOVING COMBINATION FILTER
AC5000 SERIES
Main Unit
OPERATING INSTRUCTIONS
UV-C
Bulb
UV-C
Metal
Shield
Combination
Filter C
includes Pre/
harcoal &
C
filter
Lock & Release
Button
Rear Cover
with Air Inlet Grill
CHANGE FILTER INDICATOR
The green power light on the air cleaner will turn red and flash continuously indicating that it is time
to replace the filter. Replace the filter according to the directions then press the UV control button
and hold for 5 seconds to restart the system. The light will turn back to green. Depending on usage,
filter will last approximately 6 months.
REPLACE FILTER
1. Turn off and unplug
the unit.
2. Press the Lock & Release
Button and remove the
Rear Cover from the unit.
3. Remove the used
Combination Filter.
4. Insert new Combination Filter
into the unit. Consult the arrow
on the filter for correct
installation direction.
BEFORE OPERATING THE AIR PURIFIER:
1. Carefully remove your air purifier from box and bag.
2. Select a firm, level and flat location for the air purifier.
* For proper air flow, locate the unit at least 1 foot from any wall or furniture.
* Make sure none of the grills are blocked.
3. Plug the power cord into a 120V AC outlet.
IMPORTANT: When moving the air purifier, always lift unit by the carrying handle located on back.
5. Reattach the Rear Cover of the unit and securely latch into place.
6. Push and hold UV Control Button for 5 seconds to reset Filter Change Indicator.
OPERATING THE AIR PURIFIER:
1. Turn the air purifier ON by rotating POWER KNOB clockwise.
2. Upon turning the air purifier ON, the power indicator will be lit (green) and the unit will
be in LOW mode ( ).
3. Rotate the POWER KNOB clockwise to set the air purifier to MEDIUM ( ) or
High mode ( ).
4. To activate the UV-C Bulb, press the UV button. Press the button again to turn OFF the
UV-C Bulb.
5. To turn the unit OFF, rotate the POWER KNOB counter-clockwise to OFF mode (•).
E-6E-7
Check out our on-line Filter Reminder
and Replacement program.
www.guardiantechnologies.com
Page 5
CLEANING & MAINTAINING
AC4825 SERIES
THE COMBINATION FILTER
The air purifier should be cleaned at least once every month and the outer Pre-/Charcoal
Filter attached to the Filter should be cleaned every month. More frequent cleaning may be
required depending on environmental conditions.
PRE-/CHARCOAL FILTER
Clean with the brush attachment of your vacuum cleaner. This will remove lint and dirt.
Filter Package includes:
1
-Piece Filter
1-Piece Pre-/Charcoal Filter
Filter lasts approximately 6-8 months
depending on use
F
ILTER
Remove the Combination Filter from the back of unit.
Remove the Pre-/Charcoal Filter to expose the filter.
When the Filter turns from white to grey or black it should be replaced with
a new one. If the filter is still white, it does NOT need to be replaced.
Create ONE
COMPLETE
COMBINATION
FILTER
Clean Air Delivery Rate
From air cleaner to air cleaner, compare the CADR numbers. First look at suggested room size. Then refer
to the Clean Air Delivery Rate (CADR) numbers. The higher the number, the faster the unit filters the air.
This air cleaner is suggested for use in a single, closed room up to 155 square feet.
Higher CADR rates provide improved performance in all room sizes. Portable air cleaners will be much
more effective in rooms when all the doors and windows are closed.
TOBACCO SMOKE: 100+ AC4825
This value represents performance that can be expected within the first 72 hours of operation. Subsequent
use may vary with use.
Tested per ANSI/AHAM AC-1 National Standard
AC5000 SERIES
Clean Air Delivery Rate
From air cleaner to air cleaner, compare the CADR numbers. First look at suggested room size. Then refer
to the Clean Air Delivery Rate (CADR) numbers. The higher the number, the faster the unit filters the air.
This air cleaner is suggested for use in a single, closed room up to 193 square feet.
Higher CADR rates provide improved performance in all room sizes. Portable air cleaners will be much
more effective in rooms when all the doors and windows are closed.
TOBACCO SMOKE: 125+ AC5000
This value represents performance that can be expected within the first 72 hours of operation. Subsequent
use may vary with use.
Tested per ANSI/AHAM AC-1 National Standard
IMPORTANT: Do NOT try to wash and re-use the Combination Filter. Please contact Customer
Service at 1.866.603.5900 or visit us at www.guardiantechnologies.com to purchase a
replacement filter.
What is CADR?
CADR stands for “Clean Air Delivery Rate,” which indicates the volume of filtered air delivered by
an air purifier. CADR ratings show the effectiveness of how efficient the air purifier is at capturing
fine particules from things like tobacco smoke and plant pollens from the room.
AC4825 Series Replacement Filter FILTER B (FLT4825)
AC5000 Series Replacement Filter FILTER C (FLT5000)
NOTE: Do NOT stick any foreign objects or your fingers inside of the unit.
CAUTION: Do NOT use gasoline, benzine, thinner, harsh cleaners, etc. on and/or in
NO
TE: The Combination Filter is one filter system. The multiple layers include:
the Pre-/Charcoal Filter and the Filter.
the unit while cleaning as they will damage the product.
NEVER use alcohol or other solvents.
AIR PURIFIER
Use a clean, dry, soft cloth to wipe the external surface of the unit.
E-8E-9
Page 6
INSTALLING & REMOVING UV-C BULB
INSTALLING & REMOVING UV-C BULB
CHANGE BULB INDICATOR
The blue light on the front of air cleaner will begin to flash continuously when it is time to replace
the UV-C bulb. Replace the bulb according to the directions then press the UV control button and
hold for 5 seconds to restart the system. The light should remain a constant blue.
REPLACE BULB
Continue reading below for
remaining instructions on how
to Install & Remove the UV-C
Bulb for the AC4825 Series and
the AC5000 Series.
1. Remove the Rear Cover
of the unit by pushing
Lock & Release Button.
2. After removing the Rear
Cover from the unit, remove
the Combination Filter.
AC4825 SERIES
AC5000 SERIES
TWIST BULB 1/4 TURN
TO REMOVE BULB
3. After removing the
Combination Filter,
use a Philips head
screwdriver to remove
four (4) screws and
detach the UV-C
Metal Shield.
5. The UV-C Bulb is reinstalled by reversing the process in Step 4.
6. Push and hold UV Control Button for 5 seconds to reset UV Bulb Change Indicator.
REPLACEMENT BULB: LB5000
AVAILABLE AT 866.603.5900 OR WWW.GUARDIANTECHNOLOGIES.COM
4. The UV-C Bulb is removed
by carefully grasping the
bulb with a clean cloth or
tissue and twisting the bulb
1/4 turn. Remove from unit.
Bulb is NOT visible until
the UV-C METAL SHIELD
has been removed.
IMPORTANT: The UV-C Bulb should be replaced every 10 - 12 months depending on use.
Please contact Customer Service at 1.866.603.5900 or visit us at
PULL UV-C BULB
STRAIGHT OUT OF UNIT
Bulb is NOT visible until
the UV-C METAL SHIELD
3. After removing the Combination
Filter, use a Philips head
screwdriver to remove two (2)
screws and detach the UV-C
Metal Shield.
5. The UV-C Bulb is reinstalled by sliding it, horizontally, back into the slots at the top of the unit.
6. Push and hold UV Control Button for 5 seconds to reset UV Bulb Change Indicator.
REPLACEMENT BULB: LB4000
AVAILABLE AT 866.603.5900 OR WWW.GUARDIANTECHNOLOGIES.COM
E-10E-11
4. The UV-C Bulb is removed
by carefully grasping the
bulb with a clean cloth or
tissue and pulling the bulb
straight out of the unit.
has been removed.
www.guardiantechnologies.com to purchase a replacement bulb.
Page 7
TROUBLESHOOTING GUIDE
LIMITED WARRANTY
PROBLEMSOLUTION
Unit does not operate.Check that the unit is plugged in.
Call Customer Service 1.866.603.5900.
Unit shuts off unexpectedly.
No air circulating from unit.
Increase in noise level.Make sure the filters are clean. Replace if necessary.
Power light is red and flashing.Replace filter and reset system. See E-7.
Blue UV-C light is flashing.Replace bulb and reset. See E-10, E-11.
heck that the unit is plugged into a working
C
electrical outlet.
Check that the Filter is firmly in place. Check that
the Rear Cover is latched firmly in place. Call
Customer Service 1.866.603.5900.
plug unit. Check Pre-/Charcoal Filter.
Un
Clean Pre-/Charcoal Filter if necessary.
Replace Filter if necessary.
REPLACEMENT PARTS
To Purchase Contact Customer Service at
1.866.603.5900 or visit www.guardiantechnologies.com
AC4825 SERIESAC5000 SERIES
To the consumer, Guardian Technologies LLC warrants this product to be free of defects in materials
or workmanship commencing upon the date of the original purchase. Save your original sales
receipt to validate start of warranty period. Warranty is not valid without receipt.
If this product should become defective within the warranty period, we will repair or replace any
defective parts free of charge. All warranty repairs must be completed by Guardian Technologies
LLC. This warranty does not cover unauthorized repairs. The warranty does not include unusual
wear, damage resulting from accident, or unreasonable use of the product. This warranty only
covers the product when used with genuine Guardian Technologies accessories. This warranty
covers product that was purchased from authorized distributors. This warranty gives you specific
legal rights and you may also have other rights (other rights may vary from state to state in
the U.S.A.)
The product warranty registration can be completed online at
www.guardiantechnologies.com. We consider the registration process important to ensuring
superior service to our customers, however submitting the warranty registration is optional and
does not affect your rights to utilize this warranty according to the conditions stated above. To
submit product under warranty the complete machine must be delivered pre-paid to Guardian
Technologies LLC. Please include complete information including: the problem, the model number
of the product, the day of purchase, and a copy of the original sales receipt along with your name,
address, and telephone (email optional). Address returns to the attention of: Customer Service,
at the address below. Additional questions or comments can be made toll free to the number
listed below.
Guardian Technologies LLC
26251 Bluestone Blvd.
Euclid, Ohio 44132
1.866.603.5900
www.guardiantechnologies.com
Replacement UV-C Bulb
Model No. LB4000
FILTER B or FILTER B PET Replacement Filter
Model No. FLT4825
FILTER C or FILTER C PET Replacement Filter
Model No. FLT5000
Replacement UV-C Bulb
Model No. LB5000
This warranty can be registered online at www.guardiantechnologies.com.
Additional copies of the instruction manual can be obtained by accessing and
printing directly from our website or calling customer service.
Check out our on-line Filter Reminder
and Replacement program.