Guardian NESS D8/16 User Manual

NESS D8/16
USER GUIDE

Guardian Alarms

1300 765 987

[e-mail]

BEFORE LEAVING THE
PROPERTY

secure all windows and
doors confine pets to

designated rooms by

keeping doors shut

AT NIGHT

Keep windows and doors
shut in rooms which are
being protected by sensors
confine pets to designated
rooms

ENSURE

Sensors are not obstructed
by furniture or suspended
objects e.g.. Festive/party
decorations detectors are
free of insects and cobwebs

TAKE CARE

Protect sensors when

decorating or doing building
work. If you go away ensure
that your key holders know
how to switch your alarm off

HOW TO CANCEL FALSE
ALARMS

Your password/voice code if
security needs to verify an
alarm. Inform Security of the

dates you’ll be away

ARMING

• Ensure power is on and READY SYMBLE is on

• Press ARM then E button 3 beeps will sound

MONITOR ARMING

• This is used when the user is INSIDE the premise

• and wants protection around the perimeter.

• Close all protected windows and doors.

• Ensure power is on and READY symbol is on

• Press monitor then E (system arms with pre-programmed

zones bypassed)

• 3 beeps will sound

• ARM symbol will come on

DISARMING

• Enter code then press E

• Armed symbol turns off

BYPASSING/ISOLATING

• When bypassing, the system must be in DISARMED state.

• Press Exclude E

• 3 beeps will sound (exclude symbol appears)

• Enter the zone you wish to bypass and then press E

• (i.e. zone 1 = 1E, zone 2 = 2E)

• Press E 3 beeps will sound

• This is a one off exclusion will reset after alarm is disarmed

VIEWING ALARM MEMORY

• press MEMORY then E 3 beeps will sound

• Press MEMORY button to scroll through log

• Press MEMORY E to get out of memory mode

CHANGING THE PIN CODE

• Press P followed by master code then E

• Press P 201 E

• Enter new code E, Enter new code E (number cant start with 0)

• Press P then E to exit