Safety Stations with Eyewash
F
G1902 Safety Station with Eyewash, Stainless Steel Bowl
Application: Combination eyewash and shower safety
station. Two GS-Plus™ spray-type outlet heads deliver a flood
of water for rinsing eyes.
Shower Head: 10" diameter orange ABS plastic.
Shower Valve: 1" IPS chrome plated brass stay-open ball valve.
Valve is US-made with chrome plated brass ball and Teflon®
seals. Furnished with stainless steel actuating arm and 29"
stainless steel pull rod.
Spray Head Assembly: Two GS-Plus™ spray heads. Each head
has a “flip top” dust cover, internal flow control and filter to
remove impurities from water.
Eyewash Bowl: 11-1/2" stainless steel.
Eyewash Valve: 1/2" IPS chrome plated brass stay-open
ball valve. Valve is US-made with chrome plated brass ball and
Teflon® seals.
Pipe and Fittings: Schedule 40 galvanized steel. Furnished
with orange polyethylene covers for vertical piping for high
visibility and corrosion resistance.
Supply: 1-1/4" NPT female top or side inlet.
Waste: 1-1/4" NPT female outlet. Outlet can be positioned at
either 9-1/4" or 19-5/8" above finished floor by reversing lower
pipe nipples.
Sign: Furnished with ANSI-compliant identification sign.
Quality Assurance: Valve and spray head assemblies are
factory assembled and water tested prior to shipment.
Available Options
F GC Powder coated finish on galvanized Pipe and Fittings:.
Available colors include orange, yellow, red and green.
F
FC20 Regulates shower flow rate to 20 GPM.
F
GRN Green ABS plastic shower head.
F
YEL Yellow ABS plastic shower head.
F
SSH Stainless steel shower head.
F
AP275-100 Electric Light and Alarm Horn
Light and alarm horn summon assistance when eyewash
or shower is activated.
F
AP250-015 Modesty Curtain
Modesty curtain for mounting on safety station.
F
TMV G3800LF thermostatic mixing valve precisely blends
hot and cold water to deliver warm (tepid) water as
required by ANSI Z358.1-2014.