
USER MANUAL
ATGSW6621
BLUETOOTH SPEAKER
FE ATURES
Thanks for your purchase of our product.
Please read through this manual before
making connections and operating this
product. Retain this manual for future
reference.
●Bluetooth playback
●AUX input
●Power supply: DC-5V
Note: ●Use DC adapter or USB terminal to
charge battery no matter the speaker power
on or off.
●In low battery status, the red indicator
flash twice every few seconds and it will
switch off automatically if no charged in low
battery status.
●Speaker max output: 5W
AC CE SS ORY
●User manual
●USB cable
●Carabiner
-1- -2- -3-
PR EC AU TI ON
●Do not drop a ny o bject s in to the unit t hr ough th e
opening s.
●Do not sp il l or s pray li qu id of any kin d on o r in the
unit. It ma y re sult in a f ir e or electr ic s hock.
●Do not plac e an ythin g he avy on the un it .
●To ensure pro pe r venti la tion and pr op er
operati on , never c ov er or block t he s lots an d
opening w it h a cloth o r ot her mater ia ls.
●Keep the un it a way fro m an o pen flame s uc h as
fire, can dl e, etc.
●Insta ll t he b atter ie s correct ly.
●Please di sp ose the b at teries ac co rding t o th e
local rul e an d law.
●The max im um w orkin g te mperatu re i s 35
degrees C el sius.
●Only us e at ta chmen ts /access or ies spe ci fied by
the manuf ac turer.
●Where t he M ai ns plug i s us ed as the dis co nnect
device, t he d iscon ne ct device s ha ll rema in r eadily
operabl e.
●Rating la be l are on th e bo ttom of the u ni t.
WAR NING: The b atter ie s shall not b e ex posed t o
excessi ve h eat suc h as s unshine , fi re or the l ik e.
CAUTION : Da nger of e xp losion if b at tery is
incorre ct ly repl ac ed.Repl ac e only wi th t he same or
equival en t type.
PANEL
3
2
1
1. STAND BY
8
6
7
4
5
10
9
11
12
2. CHARGI NG
INDIC ATOR
3.PLAY/PAUSE
/HANDS FR EE /
BLUETOOTH
4.AUX IND IC ATOR
5.BLUETOOTH
INDIC ATOR
6.TWS
7.VOL UM E+
8.VOL UM E-
9.DC IN 5 V
10.AUX IN PU T
11.S IL ICA GEL CA P
(PULL UP)
12.MICR OP HONE
STANDBY/TWS
●Press and hold this button to switch on the
speaker,press this button again to switch off
the speaker.
TW S
●Press this button to connect or disconnect
the speaker bluetooth connection with the
other of the same .
VO LU ME +
●When the speaker is in working mode,
press to turn up the volume.
●You wi ll h ea r th e be ep s ou nd w he n yo u
turn up to the maximum volume.
VO LU ME -
●When the speaker is in working mode,
press to turn down the volume.
●You wi ll h ea r th e be ep s ou nd w he n yo u
turn down to the minimum volume.
-4- -7--6--5-
PL AY/PA US E/ HA ND S FR EE /B LU ET OO TH
When the speaker is in working mode.
●Press to temporarily pause a playback;
press it again to resume the playback.
●Press this button to answer the phone call
in hands free when there is a phone call in.
●Press and hold this button to disconnect
the bluetooth connections, the speaker will
turn to pairing other matching bluetooth
device when you hear the short beep sound .
LE D IN DI CATO R STATUS
●When charging your speaker:
Solid red LED means charging.
Red LED OFF means charging complete.
●When pairing bluetooth devices:
Quick flashing blue LED means bluetooth
not connected ,ready to pair.
Solid blue LED means bluetooth
connected.
●When connected via AUX IN:
Solid green LED means connected.
CH AR GI NG
This speaker has a built-in rechargeable LiIon battery. Full charge the speaker before
first use.Charge the battery as follows:
●Connect one end of the included USB
charging cable to the charging port on your
speaker. Then plug the other end of the USB
charging cable into a suitable port on your
computer or 5V/1A power adapter (sold
separately).
●The red LED light will turn ON. When the
charge is complete the red LED light will turn
OFF.
AU X IN
●This speaker has an extra group of audio
input terminals. You can input the analogue
stereo audio signals from extra devices such
as mobile phone, computer,MP3 player, etc.
●Use the audio cable to connect the audio
output terminals of mobile phone, computer,
MP3 player to the audio input terminal (AUX
IN) of this speaker.
●When the speaker connect the AUX input
terminal and the green indicator of AUX keep
solid, the speaker will disconnect the
bluetooth connection automatically .
●When the speaker disconnect the AUX
input terminal, the speaker will return to the
previous bluetooth connnection.

BL UE TOOTH CONNECTION
●The bluetooth pairing model of the
speaker is ATGSW6621, power on the
speaker by pressing and holding the
STANDBY bu tt on ,t he b lu e in di ca to r fl as hi ng
, the speaker is in searching bluetooth signal
status,the unit will synchronize to play songs
on your smart phone while the blue indicator
keep solid blue means bluetooth was
connected successfully.
●The speaker need to input the password
0000 when the matching bluetooth device
under version 2.1.
●The bluetooth will turn to standby mode
after 10 minutes without connections, at this
time, press and hold [STANDBY] button to
wakes up the speaker.
●When the operation too frequently or other
reason to disturb the bluetooth reconnected,
please use manually connect on the
bluetooth device.
●The bluetooth is connected to your smart
phone successfully for the first time,
disconnect the bluetooth on your smart
phone then reconnected it, the speaker will
memories your smart phone and repaired
automatically.Press [PLAY/PAUSE] to
resume the playback.
Note:
●Bluetooth connection range in 10 meters;
●The model ATGSW6621 in your device
was not deleted;
●After 10 minutes without connections, the
speaker go to dormant status and you need
to press and hold [STANDBY] button to wake
up the speaker.
Bluetooth Model:
ATGSW6621
TW S CO NN EC TI ON
●This TWS(TRUE WIRELESS STEREO)
bluetooth connection only use between the
same two speakers.
●Power on both speakers, the blue LED will
begin to flash,press the TWS button on both
speakers simultaneously ,wait a few
seconds to pair automatically, once
connected successfully, the blue indicator
keep flashing is configured as the master
,the blue indicator keep solid blue is
configured as the slave .
●Enable your bluetooth device and make
sure it is in searching mode.
●Select “ATGSW6621” from the list of
discovered devices and connect to it.
●The master speaker will act as the left
channel during TWS and will receive the
bluetooth signal,the other speaker will act as
the right channel.
●If you use AUX IN mode to connect and
play music with external device, only
connect the master to play music.
FC C STATE ME NT
1. This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful
interference, and
(2) This device must accept any interference
received, including interference that may
cause undesired operation.
2. Changes or modifications not expressly
approved by the party responsible for
compliance could void the user's authority to
operate the equipment.
NOTE: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications.
-8- -9-
FC C STATE ME NT
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct theinterference
by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced
radio/TV technician for help.
RF warning statement:The device has been
evaluated to meet general RF exposure
requirement. The device can be used in
portable exposure condition without
restriction.
R& D
-12-
DISTR IB UTING
WWW.teamprogressive.com
-10-
-11-