Guangzhou Panyu Juda Car Audio Equipment 4000457 User Manual

T H E P E R F O R M A N C E Y O U N E E D

32” Soundbar

SBT32210

Please read this user’s guide before using your new soundbar.

User’s Guide 4000457

Package Contents

 Soundbar

 AC-to-DC Power Adapter

 RCA Cable

 AC Power Cord

 Remote Control

 Mounting Template

 User’s Guide

Features

 Provides powerful sound to enhance your listening

experience

 Compatible with most Bluetooth

laptops, MP3 players, and smartphones with iOS or AndroidTM platform

 Remote for convenient controlling from a distance

-enabled tablets,

Important Safety Instructions

1. Read these instructions. Keep these instructions.

2. Heed all warnings.

3. Follow all instructions.

4. Do not use this soundbar near water.

5. Clean only with dry cloth.

6. Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

7. Do not install near any heat sources such as

radiators,heat registers,stoves,or other apparatus (including ampliﬁers) that produce heat.

Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit the soundbar.

9. Use only attachments/accessories speciﬁed by the

manufacturer.

10.

Use only with the cart, stand, tripod,

bracket, or table speciﬁed by the manufacturer, or sold with the soundbar. When a cart is used, use caution when moving the cart/soundbar combination to avoid injury from tip-over.

11.

Unplug this soundbar during lightning storms or when

unused for long periods of time.

12.

Refer all servicing to qualiﬁed service personnel.

Servicing is required when the soundbar has been damaged in any way, such as if the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the soundbar, it has been exposed to rain or moisture, it does not operate normally, or it has been dropped.

Warnings and Precautions

 To reduce the risk of electric shock, do not remove

cover (or back). There are no user-serviceable parts inside.

 Do not expose the soundbar to dripping or splashing

liquids. Do not place objects ﬁlled with liquids (such as vases) on the soundbar.

 The mains plug is used as the disconnect device.

It shall remain readily operable and should not be obstructed during intended use. To completely disconnect the soundbar from supply mains, the main plug of the product shall be disconnected from the mains socket outlet completely.

 Using the soundbar near ﬂuorescent lighting may

cause interference with the remote. If the soundbar is behaving erratically, move away from any ﬂuorescent

lighting.

Mounting the Soundbar (Optional)

Locate a place for mounting the soundbar. Make sure you have enough room for both ends of the soundbar to present unobstructed sound transmission.

2. Use the supplied mounting template to mark

two screw hole positions. Use two screws (not supplied) with heads no bigger than the soundbar’s mounting holes.

3. Align the soundbar’s mounting holes with the

screw heads and slide down to secure the soundbar.

Connections

(G) Power On/Off

INPUT

Switch to

LINE , AU X, O PT IC AL, COAXI AL , or BL UE TO OT H.

LINE IN Port Connection

Use a 3.5mm audio cable (not supplied) to connect to an additional audio device.

AUX IN Ports Connection

Use the RCA cable to connect to a TV, DVD player, game system, etc.

Volume Control (+/–)

Switch to

To an optical port (optical cable not supplied)

To a coaxial port (coaxial cable not supplied)

MUSI C, M OV IE , NE WS, or GAME.

Mounting Holes (Optionally)

DC IN

Use the AC-to-DC power adapter and AC power cord to connect to a wall outlet.

Using the Soundbar

1. Turn on your device and turn down its volume.

2. Press G to turn on the soundbar, and turn down its

volume.

3. Press INPUT to switch to LINE, AU X, OPTI CAL,

COAX IAL

You can also press BLUETOOTH on the remote to

, or BLUE TOOTH mode.

go to Bluetooth mode directly.

4. Press EQ to choose a sound option or press

MUSIC, MOVIE, NEWS, or GAME on the remote.

You can customize each option by adjusting the bass and treble sound levels, BASS +/– and TREBLE +/–.

5. After starting playback on your device, adjust

the volume of the device and soundbar to a comfortable level.

n Note: The soundbar enters standby mode if you

pause it for more than 15 minutes or if the Bluetooth connection is broken for 15 minutes.

Using the Bluetooth Function

1. After you turn on the soundbar and switch to

Bluetooth mode (BLUE TOOTH scrolls on the display), the soundbar searches for a Bluetooth-enabled device (BT PAI RING scrolls on the display).

2. Activate your device’s Bluetooth function (refer

to your device’s user’s guide). If your device uses

4000457_UG_EN_070913.indd 1-7 7/10/2013 2:39:39 PM

Bluetooth 2.0 and below, enter the password 0000 for Bluetooth connection.

3. When AUVIO SBT32210 appears in the Bluetooth

devices list, pair it to your device.

Using the Remote Control

1. Open the battery compartment

and install two AAA batteries (not included), matching the polarity symbols (+ and –) marked inside.

2. Point the remote at the center

of the soundbar to control it.

Power On/Off (G)

MUTE

Turn sound on or off.

DIM

Adjust screen brightness.

VOL +/–

MUSIC, MOVIE, NEWS, GAME

Equalizer sound options.

BASS +/–

Adjust the bass tone.

BLUETOOTH

Go to BLUETOOTH mode.

INPUT

Switch among LINE, AUX, OPTICAL, and COAXIAL mode.

/

Go to previous/next track.

Play/Pause.

TREBLE +/–

Adjust the treble tone.

n Note: During Bluetooth connection, if you need to

pair your soundbar to other Bluetooth devices, press and hold the current Bluetooth connection is interrupted, and the soundbar starts searching for other Bluetooth devices.

Battery Notes:

 Dispose of batteries promptly and properly. Do not

burn or bury them. Use only fresh batteries of the required size and type.

 Do not mix old and new batteries, different types

of batteries (standard, alkaline, or rechargeable), or rechargeable batteries of different capacities.

 If you do not plan to use the remote control for a

long time, remove the batteries. Batteries can leak chemicals that can damage electronic parts.

Speciﬁcations

Power Input ....................................................DC 18V, 3.6A

Output (RMS) ...............55W (15W × 2 + 25W Subwoofer)

Frequency Response ...................................60 Hz – 18 kHz

Drivers ............................................. 75mm × 2, 70mm × 2

Bluetooth Connection Range ........................... 30 ft. (9.1m)

Bluetooth Protocol ............................... V2.1 + EDR Class 2

Dimensions (WHD) ................................... 32 × 4.3 × 3.8 in

............................................................ (810 × 110 × 98mm)

Weight (soundbar) .........................................6.1 lb (2.74kg)

Speciﬁcations are subject to change and improvement without notice. Actual product may vary from the images found in this document.

BLUETOOTH button on the remote. The

Troubleshooting

Problem Solution

 Make sure the AC power cord is

No sound and display

Distorted sound

Unbalanced sound

Bluetooth function failure

plugged into a working outlet and ﬁrmly connected to the soundbar.

 Check the connection of your device to

the soundbar.

Check your source device to see if it is causing the distortion. Set the device and soundbar volume to a low level.

If the volume remains low even when the soundbar’s volume is turned all the way up, check the source device to make sure it is connected via a variable output. Make sure the output is not turned down too low.

 Avoid electromagnetic interference or

interference caused by other Bluetooth devices.

 Make sure your Bluetooth device

supports audio transfer, is discoverable and has its volume turned up.

 Disconnect power, then connect power

again and turn on the soundbar.

 If the connected device moves too far

away from the soundbar, the soundbar disconnects from the device. Move the device close. The connection resumes automatically.

 In Bluetooth mode but without

Bluetooth connection, press and hold EQ on the soundbar to clear the list of devices paired to the soundbar. Then pair the soundbar to your device again.

FCC Information

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

 Reorient or relocate the receiving antenna.  Increase the separation between the equipment and

receiver.

 Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

 Consult the dealer or an experienced radio/TV technician for

help.

If you cannot eliminate the interference, the FCC requires that you stop using your product. Changes or modiﬁcations not expressly by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Limited Warranty

Ignition L.P. warrants this product against defects in materials and workmanship under normal use by the original purchaser for one (1) year after the date of purchase. IGNITION L.P. MAKES NO OTHER EXPRESS WARRANTIES.

This warranty does not cover: (a) damage or failure caused by or attributable to abuse, misuse, failure to follow instructions, improper installation or maintenance, alteration, accident, Acts of God (such as ﬂoods or lightning), or excess voltage or current; (b) improper or incorrectly performed repairs by persons who are not a Ignition L.P. Authorized Service Facility; (c) consumables such as fuses or batteries; (d) ordinary wear and tear or cosmetic damage; (e) transportation, shipping or insurance costs; (f) costs of product removal, installation, set-up service, adjustment or reinstallation; and (g) claims by persons other than the original purchaser.

Should a problem occur that is covered by this warranty, take the product and the sales receipt as proof of purchase date to the place of purchase. Ignition L.P. will, at its option, unless otherwise provided by law: (a) repair the product without charge for parts and labor; (b) replace the product with the same or a comparable product; or (c) refund the purchase price. All replaced parts and products, and products on which a refund is made, become the property of Ignition L.P. New or reconditioned parts and products may be used in the performance of warranty service. Repaired or replaced parts and products are warranted for the remainder of the original warranty period. You will be charged for repair or replacement of the product made after the expiration of the warranty period.

IGNITION L.P. EXPRESSLY DISCLAIMS ALL WARRANTIES AND CONDITIONS NOT STATED IN THIS LIMITED WARRANTY. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND, IF APPLICABLE, THE IMPLIED

WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, SHALL EXPIRE ON THE EXPIRATION OF THE STATED WARRANTY PERIOD.

EXCEPT AS DESCRIBED ABOVE, IGNITION L.P. SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OF THE PRODUCT OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVENIENCE AND ANY LOSS OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT AND ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF IGNITION L.P. HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you speciﬁc legal rights, and you may also have other rights which vary from state to state. You may contact Ignition L.P. at:

Ignition L.P., 3102 Maple Ave., Suite 450, Dallas, TX 75201 02/09

For product support, call

1-866-315-0426

Complies with the European Union’s “Restriction of Hazardous Substances Directive,” which protects the environment by restricting speciﬁc hazardous materials and products.

The Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by Ignition L.P. is under license. Other trademarks and trade names are those of their respective owners.

Android is a trademark of Google Inc.

IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.

Package and user documentation are recyclable. User documentation contains recycled material.

Printed in China

07A13

4000457

4000457_UG_EN_070913.indd 8-14 7/10/2013 2:39:40 PM

Guangzhou Panyu Juda Car Audio Equipment 4000457 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual