Guangzhou Panyu Juda Car Audio Equipment 4000448 User Manual

THE PERFO RMANC E YO U NEE D
®
®
Portable Bluetooth
®
Speaker
User’s Guide
4000448
Please read this user’s guid e before using
your new spea ker.
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
Package Contents
Bluetooth Speaker
USB Charging Cable
User’s Guide
Features
Play your music wirelessly up to 30
feet (9.14m) away
Make and receive hands-free calls Play a non-Bluetooth device through
the speaker
Specifications
Battery Charge Time ............approx. 2 hours
Operation Time .................................6 hours
Frequency Response ............150Hz – 15kHz
Output Power .......................................1.5W
Impedance ..........................................4ohm
S/N ratio ........................................... 65dB
Battery charging voltage ..........................5V
Driver .....................................1.5 in. (38mm)
Bluetooth protocol .......................V3.0+EDR
Specifications are subject to change and improvement without notice. Actual product may vary from the images found in this document.
Use Your Speaker
Pairing Bluetooth devices
1. Turn on the speaker, the indicator
flashes blue. Your speaker searches for Bluetooth devices.
2. Follow the instructions for your
Bluetooth device to pair it with the speaker. After successful pairing, the indicator flashes blue every 2 seconds.
3. Use the playback controls on the
speaker or your audio device.
4. Turn off the speaker after using.
n
Note: You can download Auvio EQ App
for free from the App Store
SM
and Google Play to customize your calls and music. Enter password 0000 for Bluetooth connection if your device uses Android™ 2.1 or below.
Connect with AUX IN
1. Connect an audio cable (not included)
to your audio device, then connect to your speaker’s AUX IN jack.
2. The speaker will play your audio
source and disconnect the Bluetooth connection automatically.
3. Use the playback controls on your
audio device.
4. Unplug your audio device, the speaker
will return to the previous Bluetooth connection.
FCC Information
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a
circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV
technician for help. Changes or modications not expressly approved by Ignition L.P. could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, includ- ing interference that may cause undesired operation.
Limited Warranty
Ignition L.P. warrants this product against defects in materials and workmanship under normal use by the original purchaser for ninety (90) days after the date of purchase. IGNITION L.P. MAKES NO OTHER EXPRESS WARRANTIES. This warranty does not cover: (a) damage or failure caused by or attributable to abuse, misuse, failure to follow instructions, improper installation or maintenance, alteration, accident, Acts of God (such as floods or lightning), or excess voltage or current; (b) improper or incorrectly performed repairs by persons who are not a Ignition L.P. Authorized Service Facility; (c) consumables such as fuses or batteries; (d) ordinary wear and tear or cosmetic damage; (e) transportation, shipping or
insurance costs; (f) costs of product removal, installation, set-up service, adjustment or reinstallation; and (g) claims by persons other than the original purchaser. Should a problem occur that is covered by this warranty, take the product and the sales receipt as proof of purchase date to the place of purchase. Ignition L.P. will, at its option, unless otherwise provided by law: (a) repair the product without charge for parts and labor; (b) replace the product with the same or a comparable product; or (c) refund the purchase price. All replaced parts and products, and products on which a refund is made, become the property of Ignition L.P. New or reconditioned parts and products may be used in the performance of warranty service. Repaired or replaced parts and products are warranted for the remainder of the original warranty period. You will be charged for repair or replacement of the product made after the expiration of the warranty period. IGNITION L.P. EXPRESSLY DISCLAIMS ALL WAR­RANTIES AND CONDITIONS NOT STATED IN THIS LIMITED WARRANTY. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND, IF APPLICABLE, THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, SHALL EXPIRE ON THE EXPIRATION OF THE STATED WARRANTY PERIOD. EXCEPT AS DESCRIBED ABOVE, IGNITION L.P. SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OF THE PRODUCT OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVENIENCE AND
© 2013. Ignition L.P. All rights reserved. Auvio is a registered trademark used by Ignition L.P. Package and insert are recyclable. Insert contains recycled material.
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Printed
in China
03A13
4000448
Complies with the European Union’s “Restriction of Hazardous Substances Directive,” which protects the environment by restricting specific hazardous materials and products.
Pairing/Charging Indicator
Flashes blue when searching for a
Bluetooth device.
Flashes blue every 2 seconds when the
speaker is paired with a Bluetooth device.
Lights red when charging; indicator turns
off when fully charged.
ANY LOSS OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT AND ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF IGNITION L.P. HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. You may contact Ignition L.P. at: Ignition L.P., 3102 Maple Ave., Suite 450, Dallas, TX 75201 02/09
For product support, call
1-866-315-0426
Charge Your Speaker
Charge your speaker when the speaker beeps.
1. Connect the USB plug of the supplied
charging cable to the USB port of your computer or any USB charger.
2. Connect the cable’s micro USB plug
to the speaker’s DC 5V jack. The indicator lights red when charging and turns off when fully charged.
3. Unplug the charging cable when the
speaker is fully charged.
n Note: You can play music and
charge the speaker at the same time.
Answer a call
hands-free.
;
Play/Pause. Press and hold
for 3 seconds to disconnect Bluetooth connection.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Loading...