GuangDong Schen Investment FC 30M User Manual
3R SHOW FC-30M
User Manual
Schen Service Hotline
Guangdong ShenYi electronic technology co., LTD
www.aipp3d.com
User Manual User Manual
Cautions: Please read below important safety information。
For your better use, Please read all the information before the first time you install and
use. Damage or malfunction caused by improper operation, not following instruction or
improper operation caused by misunderstanding. Schen will not be liable for any damage
caused by misuse.
For your better use, Please follow and keep all the information attached. All the content
of the instruction will not change any purchasing agreement or terms of the statement
Schen ensured. The products from Schen were safety, environmental and effective. Also
have pass some Professional certification such as FCC、CCC、CE、RoHS ect.
3R SHOW contains electrical equipment, the power cable and other functional parts will
cause some potential safety hazards or personal hurt and property damage. Even when
improper operation. In order to reduce these risks, Please follow all the information and
cautions mentioned in our instruction so that avoid some risks and build a safe working
environment for 3R SHOW.
1.Please do Regular inspection for the product, if occurs below situations, please stop
using and call Schen service hotline: 400-086-9000 or contact with our dealer and request
the maintain methord.
1.1Burst, fracture or damage of Power cable line、Socket、Power；
1.2Overheat、Smog、spark or fire indication;
1.3Products are split up or has a strong smell;
1.4Liquid splashing into the product or power cable line;
1.5Damage and malfunction caused by dropping;
1.6Malfunction when operation by following instructions.
2. Do not disassemble and maintain by yourself. When malfunction caused by improper
operation, please send to maintenance stations that are authorized by SCHEN.
3.Plug and Socket
3.1 Damage or Corrosion phenomena of the socket, please ask professional electrical
personnel for change;
3.2 Do not bend or change the plug, if damage for the plug, please contact with
manufacturer or dealer for get the replacement parts;
3.3 For safety, Attached three core plug is only applicable to earthed power outlet.
3.4 Do not make the power outlet overloaded. The total system load should not over
80% of the branch circult rated value. Please contact with professional electrical
personnel for further information, if any questions about the power outlet
overloaded or branch circult rated value.
3.5 Make sure the power outlet can offer suitable voltage and current for the product
you need to install.
4.Maintain and clean
4.1 Do not leave the product in direct sunlight or expose to high temperatures. Otherwise
may cause malfunction.
4.2 Please keep the product in dry, do not operate with wet hands, otherwise may cause
fire or electric shock.
4.3 Switch off before clean the product, and please keep the surface of the product clean
also keep the work area clear and tidy.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-- Consult the dealer or an experienced radio/TV technician for help Changes or modifications
not expressly approved by the party responsible for compliance could void the user's authority
to operate the equipment.
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions
(1)this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Loading...