Guangde Ledup Enterprise HSLSL0608, HSLYL0608 User Manual
2018 GH
100L with 8 Function Starry Light Instruction Manual English
Size:10"x6.25"
Date:
04/27/18
MODEL NO.
IMPORTANT SAFETY INSTRUCTIONS
When using electric products, basic precautions should always be followed including the following:
READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
a)
b) Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use.
When products are used in outdoor applications; connect the product to a Ground Fault Circuit
Interrupting (GFCI) outlet. If one is not provided, contact a qualified electricianfor proper installation.
c) This seasonal
d)
Do not mount or place near gas or electric heaters, fireplaces, candles or other similar sources of heat.
e) Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
f) Do not let LEDs rest on the supply cord or on any wire.
g) Unplug the product when leaving the house, when retiring for the night, or if left unattended.
h) This is an electric product―not a toy! To avoid risk of fire, burns, personal injury and electric shock, it
should not be played with or placed where small children can reach it.
i) Do n
ot use this product for other than its intended use.
j) Do not hang ornaments or other objects from cord, wire, or light string.
k
)
Do not close doorsor windows on the product or extension cords as this may damage the wire insulation.
o not cl s oors o s o ro r i n r a h s a ir n tion.
l
)
Do not cover the product with cloth, paper or any material not part of the product when in use.
m) Do not place loghting string on carpeting,drapes,furniture,or allow it to contact vinyl siding while the \
powe is on.\
n
)
This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows,
unplug the product from the outlet. Also unplug any additional strings or products that may be attached to the product.
Replace the fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the product.
If the replacementfuse blows, a short-circuit may be present and the productshould be discarded.
) Read and follow all instructions that are on the product or provided with the product.
o
p
) Caution: To reduce the risk of fire and electric shock: a) Do not install on trees having needles, leav
branch coverings of metal or materials which look like metal, and b) Do not mount or support stri
in a manner that can cut or damage wire insulation.
q
)
SAVE THESE INSTRUCTIONS
7
8HSTR -1801E2
use product is not intended for permanent installation or use.
USE AND CARE INSTRUCTIONS
a) When the product is placed on a live tree, the tree should be well maintained and fresh. Do not place
on live trees in which the needles are brown or break off easily. Keep the tree holder filled with water.
b) If the product is placed on a tree, the tree should be well secured and stable.
c)
d)
e) When not in use, store neatly in a cool, dry location protected from sunlight.
using or reusing, inspect product carefully. Discard any products that have cut, damaged, or frayed
Before
wire insulation or cords, cracks in the LED holders or enclosures, loose connections or exposed copper wire.
When storing the product, carefully remove the product from wherever it is placed, including tree branches,
or bushes to avoid any undue strain or stress on the product conductors, connections, and wires.
FOR INDOORAND OUTDOOR USE
USER SERVICING INSTRUCTIONS
7
LED
2018
Fuse replacement:
have been strung end-to-end.
Before changing fuses, make sure the set is unplugged.
a)
c)
Using a flathead screwdriver, open fuse cover. Slide open the fuse
access cover on top of attachment plug towards blades.
d) Remove fuses carefully.
e) Risk of fire. Replace fuse only with 3 Amp, 125 Volt fuse (provided with product).
f) Close fuse cover. Slide closed the fuse access cover on top of attachment plug.
Make sure door is fully closed and fuses are completely covered.
g) Risk of fire. Do not replace attachment plug. Contains a safety device (fuse)
that should not be removed. Discard product if the attachment plug is damaged.
INSTRUCTIONS
Connecting Sets End to End
a)When multiple products are connected together,
of the indicated maximum wattage on the cord tag near the
product’s receptacle.
CAUTION:
lighting string that does not have a Wattage (W) rating {found on the tag within 6 inches of the plug} calculate the wattage as follows:
Multiply the current (___A) which is on the flag-type tag by 120. For Example: Lighting string is rated 120V, 60Hz, 0.2 Amps.
0.2 X 120 = 24 Watts. Add the wattage of each light string together for a total Watts or less. (Do not exceed Watts.)
2.
To reduce the risk o
3.
Do not use a dimmer switch or install any additional Christmas lightingor ornamentation that is powered by a light bulb socket.
Doing this may result in damage to your light string or cause personal injury. This action will result in a void of the limitedwarranty
of this product.
4.Do not replace or modify any connectors on this product ,discard product if connector is damaged.Do not disconnect the connector
of this product to connect it to other products.
5.To reduce the risk of fire and electric shock,use only the power supply Mode SL08 mfd. by Ledup Enterprise (China),Inc that was
provided with this product.
6.This is an electric product -not a toy!To avoid risk of fire ,burns,personal injury and electric shock it should be not played with or
placed where small children can reach it.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
However, there is no guarantee that interference will not occur in a particular installation.
if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
harmful interference to radio or television reception, which can be determined by turning
the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user's authority
Most often, fuses blow because too many sets
b)
Grasp plug and remove from the
receptacle or other outlet device.
Do not unplug by pulling on cord.
CTS
T
U
M
T
OCONEC
1.
This lighting string is ratedWatts (0. mps), do not overload. Connectother lighting strings or
decorative outfits end-to-end up to a maximum o Watts (1. mps) total. If connecting to a
f fire or electric shock, do not attempt to replace lamps or modify or product.
N
to operate the equipment.
L
T
7.2
77
R
P
P
E
I
L
6A
099
U
D
O
do not exceed the lowest
connected
4f 14
_____
uses and can radiate radio frequency energy and,
20 A
_____________________
If this equipment does cause
the equipment off and on,
4 144 of 14
Loading...