GTSYS IRUPOE-07-30DB User Manual
Quick Reference Guide
IR-U-POE (USA) / IR-E-POE (European)
First Edition (May 2014)
Copyright © 2014 GTSYS Ltd.
Table of Contents
1 Getting Acquainted............................................................................................................1
2 Installing the IR-U-POE.......................................................................................................2
2.1 Installation pre-requirements.......................................................................................2
2.2 Software installation....................................................................................................2
3 Start APTool......................................................................................................................3
3.1 FCC Approval Carrier test.............................................................................................4
3.2 FCC Approval Frequency Hopping.................................................................................5
3.3 Reading Tags.............................................................................................................6
3.4 Writing Tags...............................................................................................................7
4 Set IP-Address Dialogue.....................................................................................................8
4.1 To set the reader IP-Address........................................................................................8
5 Set Password Dialogue.......................................................................................................9
5.1 To set a password.......................................................................................................9
5.2 To reset the password ( to default )...............................................................................9
6 Set Power Dialogue..........................................................................................................10
6.1 To set the power level...............................................................................................10
7 Menu..............................................................................................................................11
7.1 Main menu................................................................................................................11
7.2 Application short-cuts................................................................................................11
8 About.............................................................................................................................12
9 Disclaimer.......................................................................................................................13
Document History
Author Version
C.R. Pre 0.1 Initial Version
Pre 0.2 Picture and program description
Installer chapter
Pre 0.3 Disclaimer
C.R. Release 1.0 First Edition (May 2014)
Quick Reference Guide
1
Getting Acquainted
Congratulations on purchasing a GTSYS Integraded RFID Reader. The reader can be delivered for 860 - 960
MHz (subject to regulatory region). The supported protocols are EPC Class1Gen2 / ISO18000-6C.
It has been verified to work with tags from:
• Alien
• Avery Dennison
• Impinj
• Mikoh
• RSI/Sirit
• TI
• UPM Raflatac
The read range is up to 10m, depending on the tag used and power setting.
Use this guide for more information on setting up your RFID Reader and learning how it works.
Next Chapter: Installing the IR-U-POE
Install the APTool software. The software program can be copied from the CD to your PC.
GTSYS LTD. A01 24/F Golden King Ind. Bld, 35-41 Tai Lin Pai Road, Kwai Chung, HONG KONG SAR - Email: sales@gtsys.com.hk
Copyright © 2014 GTSYS - GTSYS reserves the right to change specifications without prior notice Page 1 / 11
Quick Reference Guide
2
Installing the IR-U-POE
2.1 Installation pre-requirements
• PC with a minimum Pentium 4 class CPU
• Microsoft ® Windows 7, Linux or MAC
• 100 MB available hard drive space
• Ethernet TCP/IP network with DHCP service
2.2
Software installation
For the reader to work properly, install the programs on your computer before you connect your IR-UPOE to your computer.
1. Insert the accompanying CD into the CD tray of your computer.
2. Start the APTool.msi program from the CD and follow the instructions in the installation wizard.
3. Make sure your PC is connected to the same network as the Integrated RFID Reader.
4. Install the Integrated RFID Reader to a proper mounting pole and connect the Ethernet
port with the
PoE-Injector. The Injectors data port must connected to the network with DHCP service
available.
Power-up the PoE-Injector.
RFID Reader
Access point
PoE-Injector
PC (running Windows 7)
Next chapter: 3Start APTool
GTSYS LTD. A01 24/F Golden King Ind. Bld, 35-41 Tai Lin Pai Road, Kwai Chung, HONG KONG SAR - Email: sales@gtsys.com.hk
Copyright © 2014 GTSYS - GTSYS reserves the right to change specifications without prior notice Page 2 / 11
Quick Reference Guide
3 Start APTool
GTSYS provides a testtool: APTool. It is available from the Start menu after the
installation
process has sucessfully finished. The path to the program is: Start -> Program ->
APTool
APTool can't discover the IR-U-PoE reader automatically. After the reader had completely
started the LED show a static green in combination with a heart-beat blue. At this stage
the
reader had retrieved a IP address from the DHCP server, check the leases information
from
the DHCP server to find the readers IP. The MAC address is written on a label next to
the RJ45 Ethernet port. Connect the tool to the reader using the Settings menu tab
and select "Set IP Address" see chapter 9 for details.
Illustration 1: APTool Start-up Screen (FCC Approval Version)
GTSYS LTD. A01 24/F Golden King Ind. Bld, 35-41 Tai Lin Pai Road, Kwai Chung, HONG KONG SAR - Email: sales@gtsys.com.hk
Copyright © 2014 GTSYS - GTSYS reserves the right to change specifications without prior notice Page 3 / 11
Loading...