1750 NW 107TH AVENUE, STE P-411, MIAMI, FLORIDA, UNITED STATES
Report Type:
Original Report
Re
Reviewed B
Test Laboratory:
FCC ID:2AJDZSTELLAOMEGA
Product Type:
Smart phone
ort Number: RDG191108020-00D
Re
ort Date: 2019-11-19
Jerry Zhang
EMC Mana
:
Bay Area Compliance Laboratories Corp. (Dongguan)
No.69 Pulongcun, Puxinhu Industry Area,
Tangxia, Dongguan, Guangdong, China
Tel: +86-769-86858888
Fax: +86-769-86858891
www.baclcorp.com.cn
Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG191018004-00D
TABLE OF CONTENTS
GENERAL INFORMATION ....................................................................................................................................... 4
PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ..................................................................................... 4
RELATED SUBMITTAL(S)/GRANT(S) ............................................................................................................................. 4
TEST METHODOLOGY .................................................................................................................................................. 4
TEST FACILITY ............................................................................................................................................................. 5
SUPPORT EQUIPMENT LIST AND DETAILS .................................................................................................................... 6
CONFIGURATION OF TEST SETUP ................................................................................................................................. 6
BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................ 7
SUMMARY OF TEST RESULTS ............................................................................................................................... 8
APPLICABLE STANDARD .............................................................................................................................................. 9
TEST RESULT ............................................................................................................................................................... 9
APPLICABLE STANDARD ............................................................................................................................................ 11
TEST PROCEDURE ...................................................................................................................................................... 11
TEST EQUIPMENT LIST AND DETAILS ......................................................................................................................... 15
TEST DATA ................................................................................................................................................................ 15
APPLICABLE STANDARD ............................................................................................................................................ 18
TEST PROCEDURE ...................................................................................................................................................... 18
TEST EQUIPMENT LIST AND DETAILS ......................................................................................................................... 18
TEST DATA ................................................................................................................................................................ 19
APPLICABLE STANDARD ............................................................................................................................................ 24
TEST PROCEDURE ...................................................................................................................................................... 24
TEST EQUIPMENT LIST AND DETAILS ......................................................................................................................... 24
TEST DATA ................................................................................................................................................................ 24
APPLICABLE STANDARD ............................................................................................................................................ 29
TEST PROCEDURE ...................................................................................................................................................... 29
TEST EQUIPMENT LIST AND DETAILS ......................................................................................................................... 30
TEST DATA ................................................................................................................................................................ 30
FCC §22.917(A) & §24.238(A)- BAND EDGES ........................................................................................................ 33
APPLICABLE STANDARD ............................................................................................................................................ 33
TEST PROCEDURE ...................................................................................................................................................... 33
TEST EQUIPMENT LIST AND DETAILS ......................................................................................................................... 33
TEST DATA ................................................................................................................................................................ 33
Page 2 of 45
Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG191018004-00D
FCC §2.1055, §22.355 & §24.235 - FREQUENCY STABILITY ........................................................................... 42
APPLICABLE STANDARD ............................................................................................................................................ 42
TEST PROCEDURE ...................................................................................................................................................... 42
TEST EQUIPMENT LIST AND DETAILS ......................................................................................................................... 43
TEST DATA ................................................................................................................................................................ 43
Page 3 of 45
Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG191018004-00D
GENERAL INFORMATION
Product Description for Equipment under Test (EUT)
EUT Name:
EUT Model:
Operation modes:
Operation Frequency:
Maximum Output Power:
(Conducted)
Modulation Type: GMSK, BPSK, QPSK, 16QAM
Rated Input Voltage: 3.7Vdc from Battery or 5Vdc from adapter
Adapter
Information
External Dimension: 144mm(L)*73mm(W)*11mm(H)
Serial Number: RDG191108020-RF-S1
EUT Received Date: 2019/11/11
EUT Received Status:
Model: Stella Omega
Input: 100-240V 50/60Hz 0.15A
Output: 5V 1A
Objective
This report is prepared on behalf of G-TOUCH LLC. in accordance with: Part 2-Subpart J, Part 22-Subpart
H, and Part 24-Subpart E of the Federal Communications Commission’s rules.
The objective is to determine compliance with FCC Rules for output power, modulation characteristic,
occupied bandwidth, spurious emissions at antenna terminal, spurious radiated emission, frequency stability
and band edge.
Related Submittal(s)/Grant(s)
FCC Part 15C DSS submissions with FCC ID: 2AJDZSTELLAOMEGA
FCC Part 15C DTS submissions with FCC ID: 2AJDZSTELLAOMEGA
FCC Part 15B JBP submissions with FCC ID: 2AJDZSTELLAOMEGA
Test Methodology
All tests and measurements indicated in this document were performed in accordance with the Code of
Federal Regulations Title 47 Part 2, Sub-part J as well as the following parts:
Part 22 Subpart H - Public Mobile Services
Part 24 Subpart E - Personal Communication Services
Applicable Standards: TIA/EIA 603-D-2010.
All radiated and conducted emissions measurements were performed at Bay Area Compliance Laboratories
Corp.(Dongguan).
Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG191018004-00D
~
Measurement Uncertainty
Parameter Measurement Uncertainty
Occupied Channel Bandwidth ±5 %
RF output power, conducted ±0.61dB
Unwanted Emissions, radiated
Unwanted Emissions, conducted ±1.5 dB
Temperature ±1℃
Humidity±5%
DC and low frequency voltages ±0.4%
Duty Cycle 1%
30MHz~1GHz:5.85 dB
26.5GHz: 5.23 dB
1G
Note: Otherwise required by the applicant or Product Regulations, Decision Rule in this report did not consider the
uncertainty. The extended uncertainty given in this report is obtained by combining the standard uncertainty times the
coverage factor K with the 95% confidence interval.
Test Facility
The Test site used by Bay Area Compliance Laboratories Corp. (Dongguan) to collect test data is located on
the No.69 Pulongcun, Puxinhu Industry Area, Tangxia, Dongguan, Guangdong, China.
The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC
Public Access Link (PAL) database, FCC Registration No. : 897218, the FCC Designation No. : CN1220.
The lab has been recognized by Innovation, Science and Economic Development Canada to test to Canadian
radio equipment requirements, the CAB identifier: CN0022.
Declarations
BACL is not responsible for the authenticity of any test data provided by the applicant. Data included from
the applicant that may affect test results are marked with a triangle symbol “△ ”. Customer model name,
addresses, names, trademarks etc. are not considered data.
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested.
This report cannot be reproduced except in full, without prior written approval of the Company.
This report is valid only with a valid digital signature. The digital signature may be available only under the
Adobe software above version 7.0.
This report must not be used by the customer to claim product certification, approval, or endorsement by
A2LA, or any agency of the U.S. Government.
This report may contain data that are not covered by the accreditation scope and shall be marked with an
asterisk “★”.
Page 5 of 45
Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG191018004-00D
SYSTEM TEST CONFIGURATION
Justification
The EUT was configured for testing according to TIA/EIA-603-D 2010.
Equipment Modifications
No modification was made to the EUT.
Support Equipment List and Details
Manufacturer Description Model Serial Number
R&S Universial Radio Communication Tester CMU200 106 891
Un-Known ANTENNA Un-Known Un-Known
Configuration of Test Setup
CMU200
Antenna
EUT
Page 6 of 45
Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG191018004-00D
N
Block Diagram of Test Setup
EUT
on-Conductive Table
150 cm above Ground Plane
1.5 Meter
CMU200
1.0 Meter
Antenna
Page 7 of 45
Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG191018004-00D
SUMMARY OF TEST RESULTS
FCC Rules Description of Test Result
§1.1310, §2.1093 RF Exposure Compliance
§2.1046;
§ 22.913 (a); § 24.232 (c);
§ 2.1047 Modulation Characteristics Not Applicable
§ 2.1049; § 22.905
§ 22.917; § 24.238
§ 2.1051,
§ 22.917 (a); § 24.238 (a)
§ 2.1053
§ 22.917 (a); § 24.238 (a)
§ 22.917 (a); § 24.238 (a) Out of band emission, Band Edge Compliance
§ 2.1055
§ 22.355; § 24.235
Spurious Emissions at Antenna Terminal Compliance
Frequency stability vs. temperature
RF Output Power Compliance
Occupied Bandwidth Compliance
Spurious Radiation Emissions Compliance
Frequency stability vs. voltage
Compliance
Page 8 of 45
Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG191018004-00D
FCC §1.1310 & §2.1093- RF EXPOSURE
Applicable Standard
FCC§1.1310 and §2.1093.
Test Result
Compliance, please refer to the SAR report: RDG191108020-20.
Page 9 of 45
Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG191018004-00D
FCC §2.1047 - MODULATION CHARACTERISTIC
According to FCC § 2.1047(d), Part 22H & 24E there is no specific requirement for digital modulation,
therefore modulation characteristic is not presented.
Page 10 of 45
Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG191018004-00D
According to FCC §2.1046 and §22.913 (a), the ERP of mobile transmitters and auxiliary test transmitters
must not exceed 7 watts.
According to FCC §2.1046 and §24.232 (C),
equipment must employ a means for limiting power to the minimum necessary for successful
communications.
According to §24.232 (d) Power measurements for transmissions by stations authorized under this section
may be made either in accordance with a Commission-approved average power technique or in compliance
with paragraph (e) of this section. In both instances, equipment employed must be authorized in accordance
with the provisions of §24.51. In measuring transmissions in this band using an average power technique, the
peak-to-average ratio (PAR) of the transmission may not exceed 13 dB.
Test Procedure
GSM/GPRS/EGPRS
Function: Menu select > GSM Mobile Station > GSM 850/1900
Press Connection control to choose the different menus
Press RESET > choose all the reset all settings
Connection Press Signal Off to turn off the signal and change settings
Network Support > GSM + GPRS or GSM + EGSM
Main Service > Packet Data
Service selection > Test Mode A – Auto Slot Config. off
MS Signal Press Slot Config Bottom on the right twice to select and change the number of time slots
and power setting
> Slot configuration > Uplink/Gamma
> 33 dBm for GPRS 850
> 30 dBm for GPRS 1900
> 27 dBm for EGPRS 850
> 26 dBm for EGPRS 1900
BS Signal Enter the same channel number for TCH channel (test channel) and BCCH channel
Frequency Offset > + 0 Hz
Mode > BCCH and TCH
BCCH Level > -85 dBm (May need to adjust if link is not stable)
BCCH Channel > choose desire test channel [Enter the same channel number for TCH channel (test
channel) and BCCH channel]
Channel Type > Off
P0 > 4 dB
Slot Config > Unchanged (if already set under MS signal)
TCH > choose desired test channel
Hopping > Off
Main Timeslot > 3
Network Coding Scheme > CS4 (GPRS) and MCS5 (EGPRS)
Bit Stream > 2E9-1 PSR Bit Stream
AF/RF Enter appropriate offsets for Ext. Att. Output and Ext. Att. Input
Connection Press Signal on to turn on the signal and change settings
mobile and portable stations are limited to 2 watts EIRP and the
Page 11 of 45
Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG191018004-00D
K
WCDMA-Release 99
The following tests were conducted according to the test requirements outlines in section 5.2 of the 3GPP
TS34.121-1 specification. The EUT has a nominal maximum output power of 24dBm (+1.7/-3.7).
Loopback ModeTest Mode 1
Rel99 RMC 12.2kbps RMC
WCDMA
General Settings
Power Control
Algorithm
βc / βd 8/15
Algorithm2
WCDMA HSDPA
The following tests were conducted according to the test requirements outlines in section 5.2 of the 3GPP
TS34.121-1 specification.
Mode HSDPAHSDPAHSDPAHSDPA
WCDMA
General
Settings
HSDPA
Specific
Settings
Power Control AlgorithmAlgorithm2
CQI Repetition Factor 2
Subset 1234
Loopback Mode Test Mode 1
Rel99 RMC 12.2kbps RMC
HSDPA FRC H-Set1
βc 2/1512/1515/1515/15
βd 15/1515/158/154/15
βd (SF) 64
βc/ βd 2/1512/1515/815/4
βhs 4/1524/1530/1530/15
MPR(dB) 000.50.5
DAC
8
DNAK 8
DCQI 8
Ack-Nack repetition
factor
CQI Feedback 4ms
Ahs=βhs/ βc 30/15
3
Page 12 of 45
Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG191018004-00D
k
g
K
WCDMA HSUPA
The following tests were conducted according to the test requirements outlines in section 5.2 of the 3GPP
TS34.121-1 specification.