What else will you need?
Checklist
®
E-Z GATE OPENER
Opening Gates Around the World Since 1987!
®
PLANNING GUIDE
NewNew
forfor
20052005
®
E-Z GATE OPENER
UL325 SERIES
COMMERCIAL GRADECOMMER CIAL GRADE
COMMERCIAL GRADECOMMERCIAL GRADE
350350
®
OUR OPENERS WORK ONOUR OPENERS WORK ON
ALL TYPES OF GATESALL TYPES OF GATES
QUESTIONS to consider when purchasing an opener:
1) Do you have a single or dual gate?
2) Does your gate swing or slide?
A) If swing, continue with guide below.
B) If slide, ask your retailer about Special Ordering or call 1-800-543-GATE (4283) for additional information.
3) Does your gate swing into or away from your property?
4) How long is each gate leaf?
5) How much does each gate leaf weigh?
6) Is your gate within 1000 ft. of a 110V AC power source? IF NOT, SOLAR CHARGING IS AN OPTION.
Which Mighty Mule Gate Opener, Is Right For You?
350350
GATE TYPE
MAX. GATE
WEIGHT
MAX. GATE
LENGTH
AC POWER
SUPPLY
(within 1000’ of gate)
BATTERY
SOLAR
COMPATIBLE
CYCLES PER
DAY
GATE OPENING
DIRECTION
Single
550 lbs.
16 feet
18V Heavy-Duty Transformer is included 18V Heavy-Duty Transformer is included 18V Heavy-Duty Transformer is included
NOT INCLUDED
(12 V automotive/marine style battery required.
Yes
175 (with transformer) with 1500 battery
backup cycles
Opening into or away from property (with
additional Push-to-Open bracket, FM148)
8 0 0 - 5 4 3 - G ATE (4283) • www. m i g h t y m u l e . c o m
Single
850 lbs.
18 feet
INCLUDED
225 (with transformer) with 50 battery
backup cycles
Opening into or away from property
additional Push-to-Open bracket, FM148)
Dual
850 lbs. (per leaf)
18 feet (per leaf)
INCLUDED
Yes (requires 10 Watt minimum)Yes
115 (with transformer) with 25 battery
backup cycles
(with
Opening into or away from property
itional Push-to-Open brackets - 2 required, FM148)
FREEFREE
INSTALLATIONINSTALLATION
VIDEOVIDEO
COMMERCIAL GRADECOMMERCIAL GRADECOMMERCIAL GRADECOMMERCIAL GRADE
(with add-
Other Materials You May Need
• Low voltage wire (RB509) (16 gauge, multi- stranded, dual
conductor, direct burial) wire will be needed. Wire length depends
upon which accessories are used and the distance between the
transformer power supply and the gate. [1000 ft. (304 m) max.]
• If your gate is more than 1000 ft. (304 m) away from an AC 110V
power source, Mighty Mule Solar Panels must be used to trickle
charge the battery. The FM350, FM500/700 and FM502/702 are solar
compatible.
• If your gate opens out from your property, you need to purchase or
special order a "push-to-open" bracket (FM148) through your retailer.
Call 1-800-543-1236 for details. You can program the FM350,
FM500/700 and FM502/702 for this application (dual gates require 2
brackets).
• If you have thin walled tube or panel gates, you will need to reinforce
them. See diagrams below for tips on reinforcing these types of gates.
• Depending on the type of gates, a horizontal cross member or
mounting
plate may be needed to mount the opener arm and gate
bracket to the gate.
• Your gate must be in good working order, firmly hung on well seated
fence post, and swing freely and evenly. This operator WILL NOT
WORK on gates with wheels or gates that drag on the ground.
• Gates weighing more than 250 pounds require ball bearing hinges
(not provided by Mighty Mule).
• Gate post greater than 8 inches thick will require longer bolts than
provided to mount gate brackets to post. Gate post thickness plus two
inches.
• Gate post less than 4 inches will require reinforcement hardware;
large metal washers or steel plates for each side of the post.
• Masonry column installation may require special procedures.
Call 1-800-543-1236 (GTO Technical Support) for details.
Suggestions for materials you will need
to reinforce your gate: (not in kit or available from GTO)
Steel Pipe Cut in Half
(not supplied)
Thin Walled
Tube Gate
Gate
Bracket
Wood or Metal
Reinforcement
Panel Gate
(not supplied)
Gate Bracket
Gate
Bracket
1" x 6"
Wood
Reinforcement
(not supplied)
Tools You'll Need:
• Power Drill
• Open End Wrenches:
3/8", 7/16", 1/2", and 9/16"
• 3/8" Drill Bit
• Hacksaw or Heavy Duty Bolt Cutters
• Slotted (Flat Bladed) Screwdriver
All Mighty Mule E-Z Gate® Openers are Certified
and Listed in COMPLIANCE with UL325 SAFETY STANDARDS.
USC
L
I
D
S
E
T
GTO/PRO®, Mighty Mule®, E-Z Gate®, GTO®, are registered trademarks of GTO, Inc. Professional Access
SystemsTM, America’s DIY Automatic Gate OpenersTM is a trademark of GTO, Inc. and are the exclusive
property of GTO, Inc. (”GTO”). All rights are reserved by GTO, and these marks may not be used, without
the prior written permission of GTO
MMISP05
Rev. 6/21/05
®
. Copyright ©2005.
• Phillips Screwdriver
• Tape Measure
• Level
• Wire Strippers
• C-Clamps — (small,
medium, and large)
Do you have all the tools for the installation?
Did you purchase the proper power supply option?
(low voltage wire or solar)
If your gate swings out from your property did you purchase the
push-to-open bracket(s) (FM148)?
Did you note the 'standard' hardware package – will this suit
your installation (some additional hardware maybe needed)?
If you purchased the digital keypad, did you get 3 AA batteries?
Answers to commonly asked
questions
1.
What is a Mighty Mule E-Z Gate Opener?
A Mighty Mule E-Z Gate is a remote controlled automatic gate
opener system. It is the industry leading gate opener available for the
“Do-It-Yourself” installer. Because it is battery operated and uses
low voltage power, it is safe (no electrician needed), affordable, and
easy to install.
2. How is a Mighty Mule E-Z Gate Opener Powered?
All Mighty Mule gate openers are low voltage systems with a 12
Volt battery back up system. This assures operation of your gate
during a power outage. The battery can either be charged by the
included transformer, OR can be charged by optional solar panel(s).
3. How do I Install the Solar Panels?
The Mighty Mule solar panel (FM121) is a complete kit for easy
mounting within 8 ft. of the control box. If your panel(s) must be
placed farther away than 8 ft. (up to 250 ft.) to receive maximum
sunlight, additional low voltage wiring will be required. It is
important that the solar panels face South and are placed in full
sunlight, away from overhanging trees, or any obstacle that may
shade the panels(s).
4. Will the Mighty Mule Open During A Power Outage?
Yes. A fully charged FM500 or FM502 battery will provide an
average of fifty (50) cycles (open and close) and the FM350 battery
(12 Volt car or marine battery not included) provides up to 1500
cycles during a power outage. This number can vary depending on
factors such as the type of gate, number of accessories added, and
weather conditions if using solar panel(s) (FM121) to charge the
battery.
5. Can I Manually Open the Gate?
Yes! Each opener arm is mounted to the brackets on the post(s) and
gates(s) with clevis pins and clips. By removing the pin and clip at
the front end, the arm can be removed and allow the gate to be
opened manually.
6. What Happens if the Gate Opener Hits Something?
All Mighty Mule E-Z Gate openers have built-in safety obstruction
sensing which will cause the gate(s) to “Stop” and “Reverse” its
direction for two seconds if it comes in contact with an object. If the
gate comes in contact with the object twice before returning to its
fully open or close position, an alarm will sound for 5 minutes.
7. Is the Mighty Mule Gate Opener Difficult to Install?
No. Most installations can be completed easily in two to three hours.
Dual gates will take slightly longer because two operator arms are
required. All installations can be completed with tools commonly
used by most homeowners. Kits include an installation video (see
box for details.)
8. What Maintenance is required?
All Mighty Mule E-Z Gate Openers are designed to be virtually
maintenance free. However, it is recommended that the push-pull
tube be sprayed once a month with a good grade of “silicone” spray.
DO NOT use an oil based spray as this will attract sand and dirt.
ENTRY / EXIT ACCESSORIES
Entry Transmitter (FM135)
1
The Mighty Mule Entry Transmitter, has
adjustable code settings. 9 Volt battery
included.
Key Chain Mini Transmitter (FM134)
2
The Key Chain Mini Transmitter is a
miniature version of the Mighty Mule Entry
Transmitter and has the same adjustable code
settings. 12 Volt battery included.
Dual Button Transmitter (RB742)
3
Triple Button Transmitter (RB743)
These transmitters are for remote control of
multiple gate openers, and/or garage door
openers. (see Garage Door Receiver). 9 Volt
battery included.
SOLAR GUIDE
®
Mighty Mule
Receiver
-
4
5
Pedestrian
Gate
12
6
6
18
-
16
15
11
17
17
18
19
There are two ways the Mighty Mule's
battery can be charged.
1. Transformer (18V included with kit)
All Mighty Mule E-Z Gate Openers come with a transformer for maintaining the battery
charge. You can run up to 1000 ft of low voltage wire (not included) from the opener
control box to the AC 110 V outlet where the transformer is plugged. If your gate is more
than 1000 ft from an AC power source, or you just prefer to use solar power, you can use
the optional Mighty Mule solar panel(s) to maintain the Mighty Mule battery charge with
FM350, FM500/700 and FM502/702. Solar panels are not compatible with FM250.
CanadaCanada
Canada
Zone 1Zone 1
Zone 1
Zone 1Zone 1
Zone 3Zone 3Zone 3
Zone 2Zone 2Zone 2
MexicoMexico
Zone 3Zone 3Zone 3
Mexico
Zone 3Zone 3
Zone 3
Zone 3Zone 3Zone 3
Digital Keypad (FM137) Wireless or Wired
4
The Digital Keypad can be easily installed
as a wireless or wired keypad. It can be
programmed to use up to fifteen different
personal identification number (PIN) codes.
Wireless Intercom/Keypad (FM136)
5
This versatile Digital Intercom with Keypad
system is ideal for any residential application,
alerting you of visitors and allowing gate
operator activation from the safety of inside
your home. The intercom provides superior
range with crystal clear two-way communication up to 500 ft. wireless or 1,000 ft. wired.
Low Voltage Light Kit (FM124)
6
(Not Compatible with Mighty Mule 250)
This solar compatible Light Kit is perfect for
solar applications requiring gate illumination.
The digital controller allows adjustment from
0-120 seconds when gate operator is activated.
Hardware is included for either a post or
column mount installation.
Gate Opening Vehicle Sensor (FM138)
7
(Not Compatible with Mighty Mule 250)
The Gate Opening Sensor is an electromagnetic
sensor, which offers 'hands free' operation of
the Mighty Mule Gate Opener with a 12 ft.
radius of detection of vehicles in motion.
Includes 50 ft. direct burial cable. Also
available in 100 ft. (FM140) and 150 ft.
(FM141) lengths.
Garage Door Receiver (RB709)
8
The Garage Door Receiver allows you to use
the same Mighty Mule Entry Transmitter (see
Dual and Triple Transmitters) to operate your
gate opener and your garage door opener.
Compatible with most garage door openers.
Push Button Control (FM132)
9
Unlit Push Button for remote entry or exit
control. Wires directly to the control board
and uses 16 gauge multi-stranded, dual
conductor Low Voltage Wire (RB509).
Mighty Mule
Gate Openers
Mighty Mule
Control Box
2. Solar (5 or 10 Watt panels not in kit )
The solar option will have some limits. The table and map illustrate
the maximum number of gate cycles to expect per day in a particular
area when using 5 to 30 Watts of Mighty Mule solar panels. The
figures shown are for winter (minimum sunlight) and do not account
for the use of any accessory items. Accessories connected to your
system will draw additional power from the battery.
5 Watt Panel
Special Considerations:
-
5
14
1
9
2
3
8
7
Replacement Transformer
-
-
POWERING ACCESSORIES
Replacement Battery (FM150), (FM152)
11
For models: FM500/FM502, FM700/FM702, use (FM150) which is a standard
12 Volt, 7.0 amp-hour, maintenance-free battery for the Mighty Mule gate
opener systems. For model FM250 use (FM152) which is a standard 12 Volt,
1.2 amp-hour, for the Mighty Mule 250 gate opener system and the Bulldog
Pedestrian Gate Lock (FM145). For model FM350 please us a 12 Volt marine
or automotive battery that is not provided in kit.
Solar Panel 5 Watt (FM121) Or 10 Watt (FM123)
12
(Not Compatible with Mighty Mule 250)
The Solar Panel is for use for up to 15 Watts of solar charging power for
Mighty Mule models FM350, FM700 and FM702 and up to 30 Watts of solar
charging power for Mighty Mule models FM350, FM500 and FM502. Each
Solar Panel comes with tubular steel support, mounting clips, wire connectors,
and 8 ft. of Low Voltage Wire. NOTE: Dual gates require a minimum of 10
Watts.
Low Voltage Wire (RB509)
13
The 16 gauge, multi-stranded, dual conductor Low Voltage Wire is for
connecting the AC powered transformer, or the Solar Panel to the control
board. Also used for the connection of accessories, such as Automatic Gate
locks (FM143), keypads (FM137/FM136), Push Button ((FM132) and other
wired control devices. This specially designed wire is UV treated, PVC
coated and ready for direct burial. Available in 1000 ft. rolls or special lengths.
14
(RB570) for model #'s: FM500/FM502/FM350
(RB566) for model #'s: FM250/FM700/FM702
Standard 18 Volt AC transformer for maintaining the battery included
with the Mighty Mule E-Z Gate Opener.
LOCKING ACCESSORIES
Automatic Gate Lock Pull-to-Open (FM143)
15
(Not Compatible with Mighty Mule 250, MM-SL1000B/MMSL2000B)
A MUST for added security. Unlocks and locks automatically as gates
open and close. Used with Mighty Mule systems for maximum
stability and security. Comes with a keyed manual release. Recommended for gates over 8 ft. long. Ideal for animal enclosures
or high wind areas.
Bulldog Pedestrian Gate Lock (FM145)
16
Designed for horizontal use on “walk-thru” gates. The Bulldog is an
affordable solution for protecting swimming pool areas, playgrounds,
tennis courts, boat docks, etc., from unwanted access. Can be used
with Digital Keypad (FM137 or FM136) and is solar compatible.
Pin Lock (FM133)
17
The Pin Lock is a substitute for the clevis pin at the front mounting
point of all models of SWING Mighty Mule Gate Openers and the
chains of the Mighty Mule SLIDE Gate Openers to deter theft of the
opener.
• For solar applications it is recommended that you purchase an optional second battery for back up
cycles during overcast days. There is a pre-wired second battery compartment built into the
FM500 and FM502 control boxes.
• Ten (10) Watt solar panels are available by special order only.
Solar Panel Application Charts
Mighty Mule® Automatic Gate Openers
Model # Watts Zone 1 Zone 2
FM350/500
FM350/500
FM350/500
500
Gates
FM350/500
FM350/500
SINGLE Swing
FM350/500
FM502
FM502
FM502
502
Gates
FM502
DUAL Swing
FM502
Dual gates require a minimum of 10 Watts solar charging power
NOTE: A maximum of 30 Watts of solar charging power can be connected to Mighty Mule
E-Z Gate Openers.
5
10
15
20
25
30
(estimated number of cycles per day)
10
15
20
25
30
(estimated number of cycles per day)
4
8
11
14
17
20
4
7
10
13
16
Zone 3
8
16
20
28
36
44
8
13
18
23
28
13
26
30
38
46
54
13
20
27
34
41
HARDWARE ACCESSORIES
Column Mount Lock Receiver (433IH)
18
(Not Compatible with Mighty Mule 250)
For mounting the Automatic Gate Lock (FM143) or Bulldog Pedestrian
Gate Lock (FM145) on brick columns, walls, or for other applications
with limited space between gate and post.
Push to Open Bracket
19
(Not Compatible with Mighty Mule 250)
(FM148) for models: FM500/FM502/FM350
(FM149) for models: FM700/FM702 Required when a Mighty Mule
Gate Opener(s) must push a gate open, such as on a sloping driveway
or where space prevents gate(s) from opening inward (pulled open).
Order two brackets for conversion of a dual swing gate installation.
Loading...