GT Motorcycles Smart cycle User Manual

SMART CYCLE

1

GT MAGNETIC POWER BICYCLES

(SMART CYCLE)

USER’S MANUAL

Congratulations on selecting the GT Magnetic Power Bicycle (Smart Cycle in short). In
order to use and enjoy your Smart Cycle safely and to get the best p erformance and
durability from this product, please read this manual before riding and retain it for future
reference.

READ THIS FIRST

We want you to be completely satisfied with your Smart Cycle. If you have any questions
or concerns, please call us:

41 BENTLEY STREET, WETHERILL PARK NSW 2164, AUSTRALIA

PHONE: [phone]

WEB: www.gtmotor.com.au

Each bicycle comes with a Vehicle Identification Number (VIN) embossed into the frame
and a Motor Identification Number (MIN). Please record the VIN and MIN along with
other pertinent information below in the event that the bicycle is lost or stolen.

To obtain warranty repair service based on the terms and conditions mentioned below,
this card must be filled in and authenticated by the dealer from whom you purchase this
Smart Cycle. Proof of Purchase, in the form of invoice, issued by the dealer will also be
required. “Date of Purchase” will be determined by the date indicated on the invoice,
which should be the same as the date filled in the card.

VIN:
MIN:
Invoice Number:
Date of Purchase:
Dealer’s Stamp:

USER’S MANUAL

2

Smart Cycle

Specification:

Motor Power: 120Watts
Max Speed: 20 km/h
Transmission: Two speed electronic transmission
Frame Material: Aluminum Alloy
Battery Source: Lithium Rechargeable battery (14.4V, 11Ah)
Size: 1100×400×930mm
Net Weight: 9.5kg
Max load: 100kg

SMART CYCLE

3

WARNING AND CAUTIONS

Even on the best days, riding or operating any sort of vehicle is hazardous. This manual
contains many cautions and warnings. There are also some common sense rules to keep
in mind as you are preparing to ride and as you are riding. It is important that you read
and understand the rules outlined in this manual. Thanks!

Ensure all quick release is tightened up. Fail to do this can cause physical damages
and hurts.

Never attempt to disassemble the battery, or contro ller. This can result in inj ury,
fire, or damage to the Smart Cycle.

Recharge the battery before the battery is used up. Failure to do this can result in
decreased battery performance for the life of the Smart Cycle.

Do not charge the battery without attendance and in an ambient temperature below
45°C. Keep the charger out of the reach of children.

Disconnect the cable from the DC IN jack on your Smart Cycle after charging is
complete.

Do not place your Smart Cycle where it will be exposed to strong sunshine or high
heat over 60°C, and use in an ambient temperature of between -10°C to 35°C.

Do not immerse your Smart Cycle in water especially seawater or expose your
Smart Cycle to high humidity, or rain for extended periods. This can damage o r
destroy the electrical components.

Only one rider at a time. Riding double or carrying large objects that obstruct your vision
or interfere with your control of the Smart Cycle can result in loss of control.

Kids and people lack of the balancing ability are prohibited to ride. Ch ildren are
forbidden to operate without the guidance.

Ride only in flat and smooth road conditions. Ride on uneven road can cause
physical reactions. Do not use the product to climb steep road over 15 degree, it will
greatly loose power.

Do not perform tricks or stunts. Maintain complete control, caut ion and a reasonable
speed at all times. This Smart Cycle is not suited for stunt ju mping, competition or
racing.

When riding at night or in inclement weather, always use lights that are bright and
in good working order.

Take special precautions when riding in t he rain, ice or s now. Give yours elf more
time and room to brake. Ride slower than normal in order to keep full control of your
Smart Cycle.

Ride with traffic and obey all traffic laws.
Remove the key (plastic button) from the Smart Cycle after use. Make sure the

product is placed safely. Unattended product may result in theft.

USER’S MANUAL

4

SMART CYCLE

The following is a list of all the necessary parts and components of your new Smart Cycle.
Please make sure everything is enclosed in the box and in good working condition.

1 - Dismantled Bicycle 2 - Battery charger 3 - Took Kit
4 - Warranty Card 5 - Owner’s Manual 6 – Magnetic Control Button

Please check the bike along with the parts and components thoroughly for any damage
that may have been sustained during shipping. Be careful to avoid scratching the frame
when untying or unpacking the bicycle and components.

If you find that something is missing, please call the Smart Cycle authorized dealer.

Figure 1 – Parts of your Smart Cycle

1 – Bell 8 – Mud guard
2 – Brake Lever 9 – Double rim
3 – Battery Indicator 10 – Saddle/Adjustable Tube
4 – Magnetic Control Button 11 – Saddle tube Quick Release
5 – Front Quick Release 12 – Rear Reflector
6 – Charging port 13 – Chain & Pedal
7 – Disk Motor 14 – Kickstand
15 – Sensor Light