GT-Lite GT-504-15 Assembly And Installation Instructions Manual

GT-504-15

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

GT-504-15

1200 Lumen LED Portable Work Light

Questions, problems, missing parts? Please contact

1-800-865-6799

THANK YOU!

WARNING

：

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF POWER

WHILE INSTALLING OR SERVICING THIS FIXTURE.

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO
SHUT OFF POWER BEFORE INSTALLING OR SERVICING
THIS FIXTURE

GT-504-15

Safety Information

WARNING:

□ Carefully read and understand the information given in this manual before beginning the installation. Failure

to do so could lead to electric shock, fire or other injuries which could be hazardous or even fatal.

□ Ensure the electricity to the wires you are working on is shut off. Either remove the fuse or turn off the circuit

breaker.

CAUTION:

□ Use hook to support chain, not the electrical cord.

□ Do not install on radiant-heating type ceiling.

□ DO NOT remove the protective LED lens.

□ DO NOT look directly at lighted LEDs for any length of time.

IMPORTANT SAFETY INFORMATION:

When using product, basis precautions should always be followed, including the following:

□ Read and follow these instructions.

□ Heed all warnings, including below warnings AND those included on product.

□ Save these instructions and warnings.

Pre-Installation

HARDWARE INCLUDED:

Figure 1