G-Tek GT-BH18 Installation & Operation Manual

Global-Tek (Singapore) Pte Ltd

GT-BH18 EXTERNAL BOOSTER HEATER

INSTALLATION & OPERATION

MANUAL

GT-BH18External Booster Heater

Page 1

CONTENT

OVERVIEW………………………………………………………………….2

SPECIFICATION…………………………………………………………….2

MAIN COMPONENTS………………………………………………………2

INSTALLATION……………………………………………………………...3

Power Connection…………………………………………4

Water Connection…………………………………………4

INITIAL OPERATION……………………………………………………….4

OPERATION PROCEDURE…………………………………………………5

MAINTENANCE………………………………………………………………5

TROUBLE SHOOTING…………………………………...…...……………...6

CIRCUIT DIAGRAMS…………………………………...…...……………..7

GT-BH18External Booster Heater

Page 2

OVERVIEW

GT-BH18 is an external booster heater designed for use in conjunction with all door
type and conveyor type(with incoming hot water) dish washers, aiming at providing an
adequate final rinse temperature for every wash.
This equipment is equipped with 2 X 9 kW heating elements while cold water will
be heated to the desire temperature for rinsing. For conveyor machines with cold incoming
water, it is advised that a larger power output such as the models GT-BH27 or GT-BH45 be
used to ensure temperature can heat up in time.
Users are advised to read carefully this Operation Manual before use.

SPECIFICATIONS

1. Dimension: Width 708 mm X Depth: 345 mm X Height: 597 mm

2. Incoming Temperature: 10-65℃

3. Outgoing Temperature: 82-90℃

4. Incoming Pressure: 1-6 kg/cm2

5. Flow Rate: 11.4 lit/min

6. Electrical Heating: 18 kW(28 Amp)

MAIN COMPONENTS