G Tech Technology P2301B Users Manual

Wireless Keyboard Slim

Wireless radio keyboard and radio mouse
The wireless keyboard and optical mouse operate with digital radio technology. There
is no connecting cable to hinder communication bet ween the keyb oard, the mouse and
your computer. The keyboard and mouse need not be in the line of sight to the
receiver. The keyboard and mouse use radio frequencies to send data to the receiver,
which forwards these to your computer.
You can use the keyboard and mouse on any computer equipped with a free USB
interface.

CE marking

This equipment complies with the requirements of Directive 1999/5/EC of the
European Parliament and Commission from 9 March 1999 governing Radio and
Telecommunications Equipment and mutual recognition of conformity.
This device is approved for use in Belgium, Denmark, Germany, Finland, France,
Greece, Great Britain, Ireland, Iceland, Italy, Luxembourg, the Netherlands, Norway,
Austria, Portugal, Sweden and Spain.

Installing the batteries

Under all circumstances only use batteries and rechargeable batteries of the

i

same type.

The cordless optical mouse uses 2×AAA rechargeable batteries.

1. Remove the battery compartment cover
on the bottom of the mouse.

2. Insert 2×AAA rechargeable batteries in
the battery compartment. A diagram in
the battery compartment shows correct
installation.

3. The mouse will echo “BI” to show
successful installation.

4. Carefully place the cover back into place.

English - 1 -

Wireless Keyboard Slim

The cordless keyboard uses 2×AAA batteries.

1. Remove the battery compartment cover on
the bottom of the cordless keyboard.

2. Insert 2× AAA batteries. A diagram in the
battery compartment shows the correct
installation.

3. Carefully place the cover back into place.

Connecting the receiver

1. Connect the receiver's cable to the USB port of your computer and follow the
instructions displayed on screen.

2. Set up the receiver at least 20 cm away from other electronic devices, such as the
computer monitor or external storage drives to achieve optimum performance.

Maintain a distance – even in office environments – with the keyboard,

i

mouse and receiver of at least 5 meter from other radio device to prevent
interference during transmission of the signals.

Setting up the ID wireless link

–

Keyboard and Mouse ID wireless link will be set up separately
SLIM KEYBOARD

1. Press the connection button “CONNECT” on the

receiver after booting the system. Indicator RX lights.

2. To set up the keyboard wireless link, press the

RESET button on the bottom of the slim keyboard.
Indicator RX light will be off.

OPTICAL MOUSE

1. Press the connection button “CONNECT” on the
receiver after booting the system. Indicator RX lights

.

2. To set up the mouse wireless link, press the
RESET button on the bottom of the mouse. Indicator
RX light will be off.

The setup must be completed within one minute. If setup time exceeds one

i

minute, repeat procedure.

CONNECT

RX

CHRG

English - 2 -