G Tech Technology GME557RR, GK 100012CPR, GK 100012CPT, RG20, GK 100012CPK User Manual

ENGLISH
Hardware Installation
1. Install one AAA battery into the keyboard and one AA battery
into the mouse.
2. Plug in your USB receiver to a USB port of your PC.
ID Channel Setting and connection:
After you install the receiver: Wait about 5-10 seconds and the connection will be executed and the kit will be ready for use.
Replace Batteries
If the mouse or keyboard does not work properly, then the batteries have lost their charge, so you need to replace them.
Warning: do not mix or use different types of batteries at the same time.
1
ENGLISH
Keyboard hot key definition
Turn down the volume. Turn up the volume.
Mouse Button Assignments
1. Left Button: Provides traditional mouse
functions like click, double click and drag.
2. Magic-Roller: Scroll the button to surf the
Internet and Windows documents.
3. Right Button: Provides traditional mouse
click function
Notes on Battery Usage
When you use the battery, carefully read and strictly observe the Safety Instructions and the notes described below: Different battery types and surrounding temperatures may affect
the battery performance.
Avoid using batteries in extremely cold environments as low
temperatures can shorten the battery life and reduce wireless device performance.
If you are using a new rechargeable battery or rechargeable
battery that has not been used for an extended period of time
2
ENGLISH
(batteries that pass the expiry date are exceptions) it might affect the period of time you can use this device. Therefore, to maximize their performance and lifetime, we recommend that you fully charge the batteries and discharge them for at least one complete cycle before use.
The battery may feel warm when using the wireless device for an
extended period of time. This is normal and not a malfunction.
The wireless device may feel warm when being used
continuously or for an extended period of time. This is normal and not a malfunction.
If you will not be using the batteries for an extended period of
time, remove them from the wireless device to prevent leakage or corrosion.
Always keep the terminals in a clean state. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.
3
FCC Notice English - 1
Federal Communications Commission (FCC) Notice:
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is enco uraged to tr y to corr ect the inter ference b y one or mor e of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equi pme nt an d rec eiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two condi tions: (1 ) this dev ice may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
3
F ujitsu Technology Solut ions 31
Loading...