Bluetooth Stereo Transmitter & Receiver Quick Guide
Congratulation! You have got a Mobile HIFI system.
Please read this manual thoroughly, and set up your Bluetooth wireless music World.
1. Check the package contents
The package include:
2. Charge the battery
The device can work continuously for six hours. If it is almost no power, the
power LED will flash red, please using the power adapter or the USB cable to
charge.
Plug the USB cable
Plug one end of the USB jack into the transmitter/receiver, and insert the other
end to a USB port of your PC. (Make sure your PC is on) or
Plug the power adapter
Plug one end of the USB jack into the transmitter/receiver, and the other end
into the power adapter. (Make sure the power adapter connected to the
power) When it is being charged, the power LED keeps lighting red. If it is fully
charged, the power LED will turn green.
Bluetooth Stereo
Transmitter
Quick Guide
Bluetooth Stereo
Receiver
Power Adapter
6. Using with your PC
Before using, please check if your PC has Bluetooth A2DP
profile, if you are not sure of that, please consult with your
PC provider.If it has, you only need to connect to the receiver,
and needn't connect the transmitter, If your PC has no
Bluetooth A2DP profile, then connect the transmitter to your
PC. Please refer the chapter 4 of How to connect .
USB charging Cable
Stereo RCA interconnect cable
5. Using with your mobile phone
Before using, please check if your mobile phone has Bluetooth A2DP profile, if you
are not sure of that, please consult with your mobile provider.If the mobile phone
has Bluetooth A2DP profile, you only need to connect the receiver, and needn't
connect the transmitter,For the mobile phone not support Bluetooth A2DP,
use the transmitter to connect with your mobile's earphone's port (you need an
additional plug transfer from 2.5mm diameter to 3.5mm diameter). Please refer
the chapter 4 of How to connect .
1. Enable Bluetooth on your phone
2. Turn on the receiver by pressing reset key.( Check that on the device
connects with the receiver by confirming that the power/link LED is not flashing).
3. In the phone's Bluetooth menu, search for devices;
4. Select Bluexon .
5. Enter the PIN code 0000 . Select and play the Music on your mobile phone,
select Use Bluetooth . Your mobile phone will be connected with the
receiver and send the music. To terminate the music transportation, select
use mobile .
Note: Before the first use, charge the battery fully for about 10 hours.
Thereafter, recharging takes about 90 Minutes.
3. To turn on the power
To turn on the power, Press and hold the connect button (about 2 seconds)
until the Connect indicator light blue.
To turn off the power, Press and hold the connect button (about 2 seconds)
until the Connect indicator light off.
Connect
indicator
Connect Button
Power LED
USB jack
Connect
Button
RCA jack
Connect
indicator
Power LED
USB jack
Blue LED power is on
Blue flashing LED finish connected successfully
Red LED battery is charging, turns green when charged fully
Red flashing LED battery is low
4. How to connect
The Bluetooth stereo receiver can be used with the Bluetooth transmitter or
Bluetooth Audio Dongle (not included this package). On first use, the devices
must be paired.
1. Connect the Bluetooth receiver to your stereo system by the enclosed Stereo RCA
interconnect cable.
2. Plug your transmitter into an player, such as MP4, IPOD, Mobile phone, computer,
PSP. For connecting the mobile phone and PC, please refer the chapter 5 and 6.
For the Mp4 and ipod, you just plug the transmitter to them directly .
3. Press connect button on your Bluetooth stereo receiver.
4. Press connect button on your transmitter.
The Blue LED on the receiver/transmitter will flash when connected.
5. Open your favorite play list and press Play from your player.
6. Sit back, relax and enjoy your music.
IPOD
PC
Mp4
PSP
7. Troubleshooting
If the Bluetooth Stereo System does not work, try the following:
Ensure your mobile or PC was built - in BLUETOOTH A2DP profile.
Check whether the system is out off power.
Check the operation distance.
Power off the receiver and reconnect again and ensure the right
paring password 0000 .
Check whether other Bluetooth device is connected.
Check whether the system is connected correctly.
Check whether Bluetooth function of device is turned on.
8. Specifications
Operating frequency band: 2.4 to 2.48GHz unlicensed ISM band
Bluetooth specification: V1.2
Output power class: class 2
Transmission power: +3dbm to -20dbm
Maximum data rate
Asynchronous: 723.2/57.6kbps
Synchronous: 433.9/433.9Kbps
Operation temperature: -40 to +85 degrees
Receiving signal range: -83dbm to -20 dbm
Receiving sensitivity: -83 dBm 0.1% BER
Storage temperature: -40 to +105 degrees
Transmit power consumption: 46mA
Pairing code: 0000
Power supply: Standard Li-lon battery, 350mAh Rating: 3.7V 5vdc
50 100mA
Only use the USB cable and net adaptor supplied.
Physical Specification: Dimension: 62 mm x 42 mm x 12 mm
9. Caution:
This device complise with Part 15 of the FCC Rules. Operation is subiect to
the following two conditions:(1)this device may not cause harmful
interference, and (2)this device must accept any interference
received,including interference that may cause undesired operation.
Note THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR
TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT.SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY
TO OPERATE THE EQUIPMENT.
10. Copyright
Bluedio is a trademark owned by G.Tech Technology Ltd.
Other product names used in this quick guide are the properties of their
respective owners and are acknowledged.