G Tech Technology A53G User Manual

DPI Switch

The mouse has 1000/1500/2000 of DPI for your choice freely. The factory default is 1000DPI.
You can choose the DPI you like by pressing the DPI button, the LED will flash different times
according to the difference DPI, and the new setting DPI will be automatically saved under
different mode.

DPI LED flash times

1000dpi one time

LED

DPI Button

1500dpi twice

2000dpi three times

Touch on wake up

The mouse is with special touch on wake up technology. When your hands leave the mouse
for 2s, it will automatically switch to sleep mode, when you touch on the mouse, it will be
activated and the LED will flash to remind you its working.

Low power indicator

The mouse has low power indicator, when the power is nearly used up,
the LED will flash to remind you to replace the battery. When install
battery, LED will flash, if flash 5 times means remaining power is 100%,

LED

DPI button
G button

if flash 4times means remaining 75% power, flash 3times means
remaining 50% power, flash 2times means remaining 25%, flash 1time
means low power that you need to replace battery.

Power On/Off
There is power On/Off button at the bottom of the mouse,

On/Off button

if you won't use it for a long time or you have a trip, we'd
suggest you to turn the button off. When you use it again,
you'd just turn it on.

Receiver Build-in design

The mouse is with build-in design, when you stop using the nano
USB receiver, it can be stowed away in a hidden compartment inside
the mouse.It is more convenient for storing.

Energy-saving mode

The mouse is with energy saving mode, when your hands stop moving the mouse or your
hand leaving the mouse for 2s, it will automatically switch into the energy-saving mode,
which can extend the battery life.

Side Buttons Feature

The mouse is with 2 side buttons. For Windows2000 or above,

K5

K4

the buttons are defaulted as browser forward and backward
buttons. Download the driver, you can also select your
preference features to side buttons.

For more function, please download the driver from the website
of www.fuhlenstyle.com for your self-definition.

反面

Quick Start Guide

Contains:

Wireless RF mouse
USB nano receiver
2xAA battery
User guide

Battery Disposal

Don’t throw away the batteries into the fire.
After replace the batteries, put them to the right place for recycling.

Specification
Frequency band: 2402MHz ~ 2479MHz

Power supply: 1.5V

Operation current: ≤6mA(1.5V)
Acceleration: up to 20G

Resolution: DPI 1000/1500/2000 switchable

Energy-saving mode/Precision mode/Gaming mode power
consumption:≤9mW/≤14mW/≤25mW

Set Wireless Connection

The A53G mouse and USB receiver is pre-paired before packing. Users can use it after installing
the battery.

1. Turn on the computer.

2. Plug the USB receiver into an available USB port on your computer.

3. Install the battery into the mouse. Press any key to start.

If your wireless mouse will not pair with the USB receiver, you will
need to download the Pairing Software tool to your computer from
the Fuhlen website: http://www.fuhlenstyle.com/download.jsp,
and pair the mouse and receiver according to the instruction.

Ultra Low Power

Thanks for buying Fuhlen products, please read this user guide carefully before use.

Installation

Switch the On/Off button to OFF
and open the battery cover.

Switch the On/Off button to On. The LED
will flash 1-5 times according to the
remaining battery power.

Insert one or two A A batteries as the
diagram on the battery tray indicates.
Close the battery cover.

or

Plug the USB receiver into an available
USB port on your computer. Press any
key to start.

Finished setting the wireless connection of the mouse, you can enjoy the wireless freedom.

Mouse Feature

LED indicator

There's LED indicator under the scrolling wheel. When switching the mode & DPI, or touch on
mouse, or power low, it will flash differently to remind you the status of mouse.

Mode switch

There're three modes for option, the default mode is energy saving mode, you can choose
the mode you like by pressing the G button. The LED will flash different colours according
to different modes.

Mode LED Color Default DPI Speed Remarks

Energy saving mode Blue 1000dpi 125 RPS power saving for office use

Precise Mode Red 1500dpi 250 RPS For designing

Gaming Mode Purple 1500dpi 500 RPS Full speed for gaming

DPI button

G button

LED

FCC Notice English - 1

Federal Communications Commission (FCC) Notice:

Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment

NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE
CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS
COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is enco uraged to tr y to corr ect the inter ference b y one or mor e of the
following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equi pme nt an d rec eiver.

-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation

is subject to the following two condi tions: (1 ) this dev ice may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause undesired
operation.

3

F ujitsu Technology Solut ions 31