G-Technology 0G01792, 0G02272, 0G02055, 0G02057 User Manual
Table of Contents
Introduction
Safety Precautions
System Requirements
What’s in the Box
G-SPEED Q Overview
Optional G-Technology PCIe RAID Controller Overview
G-SPEED Q Audible Alarms
Setting Up G-Speed Q with the G-Technology PCIe RAID Controller
G-Technology RAID Controller Web GUI
Changing the G-Technology RAID Controller Mode
Conguring Two G-Speed Q Units in RAID 5 Mode
What To Do in the Event of a Disk Drive Failure
Technical Support
Limited Warranty
Appendix A: RAID Levels Explained
Appendix B: Notes
The lightning ash with arrowhead symbol within an equilateral triangle is intended to
alert the user to the presence of uninsulated dangerous voltage within the product
enclosure and may be of signicant risk of electrical shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating maintenance (servicing) instructions literature
accompanying the appliance.
!
!
!
!
1. READ INSTRUCTIONS
All the safety and operating instructions
should be read before the unit is operated.
2. RETAIN INSTRUCTIONS
The safety and operating instructions should
be retained for future reference.
3. HEED WARNINGS
All Warnings on the unit and in the operating
instructions should be adhered to.
4. FOLLOW INSTRUCTIONS
All operating and use instructions should be
followed.
5. ATTACHMENTS
Do not use attachments no recommended
by the unit’s manufacture as they may cause
hazards.
6. WATER AND MOISTURE
Do not use this unit near water–for example,
near a bathtub, washbowl, kitchen sink or
laundry tub, in a wet basement or near a
swimming pool.
7. ACCESSORIES
Do not place this unit on an unstable cart,
stand, tripod, bracket or table. The unit may
fall, causing serious injury and serious
damage to the unit.
8. VENTILATION
Openings in the front and back of the unit
are provided for ventilation to ensure reliable
operation and to protect it from overheating.
These openings must not be blocked or
covered. This unit should never be placed
near or over a radiator or heat source. This
unit should not be placed in a built-in
installation such as a bookcase or rack unless
proper ventilation is provided.
9. POWER SOURCES
This unit should be operated only from the
type of power source indicated on the rating
label. If you are not sure of the type of power
supply in your facility, consult your local
dealer or power company.
!
10. GROUNDING AND POLARIZATION
This equipment is supplied with a power
cord with a US style 3-wire grounding type
plug at one end and a 3-wire IEC standard
connector at the other. The 3-wire grounding
type plug will t into a US style grounding
type power outlet and the IEC connector is
intended to plug into the G-Tech unit. The 3wire grounding type plug is a safety feature.
If you are unable to insert the plug into the
outlet, do not force it. Contact your
electrician to replace the obsolete outlet. DO
NOT DEFEAT THE SAFETY PURPOSE OFTHE
GROUNDING TYPE PLUG. For use in Foreign
Countries, contact your local G-Tech dealer or
representative to obtain a power cord with a
locally compatible 3-wire grounding plug on
one end and a 3-wire IEC standard connector
to the other.
11. POWER CORD PROTECTION
Power-supply cords should be routed so that
they are not likely to be walked on or
pinched by items placed upon or against
them, paying particular attention to cords at
plugs, convenience receptacles and the
point where they exit the unit.
12. SERVICING
Do not attempt to service this unit yourself
as opening or removing covers may expose
you to dangerous voltages or tother hazards
(see Caution Symbol at rear of power supply
chassis). Refer all servicing to qualied
service personnel.
IMPORTANT SAFEGUARDS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK , DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PART’S
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE APPLIANCE TO RAIN OR MOISTURE.
2
Introduction
Thank you for purchasing G-SPEED™ Q from G-Technology™,
G-SPEED Q hard drives from G-Technology are the ideal
storage solutions for content creation professionals.
With all the power and the speed of G-SPEED and an internal
RAID controller that sports a quad interface, G-Technology’s
new four-bay G-SPEED Q delivers solid, affordable RAID
storage for both Mac users and creative professionals. GSPEED Q offers outstanding performance, high storage
capacity (up to 8 TB per unit) and optional fail-safe operation
at a low cost per gigabyte. Unlike single drive systems, if a
failure occurs your data is still safe and accessible. G-SPEED Q
is also a fast data array, ideal for HDTV video production with
formats such as multi-stream SD, Uncompressed HD and
ProRes™ formats. With G-SPEED Q, your footage is always
safely backed up. It works perfectly with demanding content
creation applications, such as those found in Apple Final Cut
Studio™.
With its built-in RAID controller, the G-SPEED Q is not tied to a
single workstation and can be easily transported and used on
a laptop or desktop in the edit bay or on the road. With its
uniquely designed all aluminum enclosure, the compact and
whisper quiet G-SPEED Q features four hot-swappable Hitachi
Ultrastar 7200 RPM 3Gbit SATA hard drives, and can be
congured in RAID 0 or RAID 5. Inside is a heavy duty power
supply and a removable cooling fan to ensure long life and
reliable operation.
G-SPEED Q’s quad interface features 3Gbit eSATA, FireWire™
800, FireWire 400 (via supplied cable) and USB 2.0.
NOTE: G-SPEED Q is formatted for Mac OS X
and will mount on the desktop right out of
the box. For details on reinitializing the GSPEED Q, using the G-SPEED Q on Windows,
or for using the G-SPEED Q for both Windows
and Mac, click here.
IMPORTANT: The G-SPEED Q has been set up at the factory in
RAID 5 mode. To change the G-SPEED Q to RAID 0 operation,
Refer to the section entitled: “Changing the RAID Level” if you
wish to change the mode of operation.
3
Safety
The disk drives and components contained in your G-SPEED
Q are delicate electronic instruments and are susceptible to
damage due to excessive physical shock. Place the unit in a
vented area away from moisture or liquids.
System Requirements
• Mac OS X 10.3 or higher
Windows XP /Vista/ Windows 7
•
What’s in the Box
Take a moment to ensure that the following items are
included in the box.
G-SPEED Q
G-SPEED Q Storage Unit
•
(4) Removable Disk Modules
•
1 meter eSATA cable
•
1 FW 800 cable
•
1 FW 400 to 800 cable
•
1 USB 2.0 cable
•
If anything is missing, please call G-Technology at (310)
449-4599. For more details on this, click here.
G-SPEED Q Overview
Please handle the unit with care. Do not open the case.
Doing so will void the warranty. If the product is returned with
damage caused by improper handling, the warranty will be void
and liability will rest with the user.
Note the various features of the G-SPEED Q. G-SPEED Q is
ideal for those that need a high speed RAID array, but use
computer systems that may not have card slots for a RAID
controller card. G-SPEED Q contains an internal RAID
controller for higher data rates.
4
Attention Mac OS X Users
G-SPEED Q is set up at the factory for use with
Mac OS X systems. If you are running Mac OS X,
G-SPEED Q will mount on the OS X desktop right
out of the box. If it becomes necessary to reformat G-SPEED Q for Mac OS X, go here.
Attention Windows Users
G-SPEED Q must be formatted for the Windows
Operating System before using the G-SPEED Q.
For more information about using the G-SPEED Q
for Windows XP, Windows Vista or Windows 7 use,
please visit: http://www.g-technology/support/windows
Installing G-SPEED Q
G-SPEED Q attaches to your computer via an eSATA, USB 2.0
or FireWire 800 port. FireWire 400 connectivity is handled by a
9 to 6 pin cable (included). Choose the connection
appropriate for your system and connect G-SPEED Q with the
supplied cable. Connect the supplied power cord to the
Power Supply and plug the other end into a surge protector
or wall outlet. Turn on the power switch and the G-SPEED Q
will mount on the desktop.
Supported RAID Levels
The G-SPEED Q is congured as a RAID 5 array at the factory.
The unit also supports RAID 0 conguration. If you wish to
change the RAID level, please refer to the section entitled:
“Changing the G-Technology RAID Controller Mode”.
5
Loading...