Gtech ATF036, AR29 User Manual
Model number: ATF036
Model number: AR29
OPERATING MANUAL
2859_System_TE_manual_update_aw.indd 1 31/05/2018 13:24
IMPORTANT SAFEGUARDS:
IMPORTANT: READ ALL INSTRUCTIONS BEFORE USE.
RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.
Do not use in rain or leave outdoors whilst raining.
WARNING: Basic safety precautions should always be observed when
using an electrical appliance, including the following to reduce the risk of
re, electrical shock, or injury:
Personal Safety:
• Store indoors in a dry place out of the
reach of children.
• Always use responsibly. This appliance
can be used by children aged from
8 years and above and persons with
reduced physical, sensory or mental
capabilities or lack of experience and
knowledge if they have been given
supervision or instruction concerning
use of the appliance in a safe way and
understand the hazards involved.
• Don’t let children play with the
appliance; supervise children using or
maintaining the appliance.
• Use only manufacturer’s recommended
attachments as described in this
manual; misuse or use of any
accessory or attachment other than
those recommended, may present a
risk of personal injury.
• Take extra care when cleaning stairs.
• Keep the appliance and accessories
away from hot surfaces.
• Do not block the appliances openings
or hinder air ow; keep openings free of
any objects including dust, lint, clothing,
ngers (and all parts of the body).
• Particularly keep hair away from
openings and moving parts.
Electrical safety:
• Only use batteries and chargers
supplied by Gtech.
• Never modify the charger in any way.
• The charger has been designed for
a specic voltage. Always check that
the mains voltage is the same as that
2
stated on the rating plate.
A charger that is suitable for one type
of battery pack may create a risk of re
when used with another battery pack;
never use the charger with another
appliance or attempt to charge this
product with another charger.
• Before use, check the charger cord for
signs of damage or ageing. A damaged
or entangled charger cord increases the
risk of re and electric shock.
• Do not abuse the charger cord.
• Never carry the charger by the cord.
• Do not pull the cord to disconnect from
a socket; grasp the plug and pull to
disconnect.
• Don’t wrap the cord around the charger
when storing.
• Keep the charger cord away from hot
surfaces and sharp edges.
• The supply cord cannot be replaced.
If the cord is damaged the charger
should be discarded and replaced.
• Do not handle the charger or the
appliance with wet hands.
• Do not store or charge the appliance
outdoors.
• The charger must be removed from
the socket before removing the battery,
cleaning or maintaining the appliance.
• Ensure the Multi is off before
connecting or disconnecting the
motorised brush bar.
Battery safety:
• This appliance includes Li-Ion batteries;
do not incinerate batteries or expose
to high temperatures, as they may
2859_System_TE_manual_update_aw.indd 2 31/05/2018 13:24
explode.
• Liquid ejected from the battery may
cause irritation or burns.
• In an emergency situation contact
professional help immediately!
• Leaks from the battery cells can occur
under extreme conditions. Do not
touch any liquid that leaks from the
battery. If the liquid gets on the skin
wash immediately with soap and water.
If the liquid gets into the eyes, ush
them immediately with clean water for
a minimum of 10 minutes and seek
medical attention. Wear gloves to handle
the battery and dispose of immediately
in accordance with local regulations.
• Shorting the battery terminals may
cause burns or re.
• When the battery pack is not in use,
keep it away from paper clips, coins,
keys, nails, screws or other small metal
objects that could make a connection
from one terminal to another.
• When you dispose of the appliance
remove the battery and dispose of the
battery safely in accordance with local
regulations.
Service:
• Before using the appliance and after
any impact, check for signs of wear or
damage and repair as necessary.
• Do not use the appliance if any part
is damaged or defective.
• Repairs should be carried out by a
service agent or a suitably qualied
person in accordance with relevant
safety regulations. Repairs by unqualied
persons could be dangerous.
• Never modify the appliance in any way
as this may increase the risk of personal
injury.
• Only use replacement parts or accessories
provided or recommended by Gtech.
Intended use:
• This appliance has been designed for
domestic dry vacuum cleaning only.
• Do not pick up liquids or use on wet
surfaces.
• Do not pick up anything that is
ammable, burning or smoking.
• Use only as described in this manual.
• Don’t use on concrete, tarmacadam
or other rough surfaces.
• The brush bar may damage certain oor
surfaces. Before vacuuming ooring,
rugs or carpets, check the ooring
manufacturer’s recommended
cleaning instructions.
• May damage delicate fabrics or
upholstery. Care should be taken on
loose-weave carpets and coverings
or where there are loose threads. If in
doubt please test on an inconspicuous
area rst.
• The Gtech AirRam has been designed
to clean a wide variety of oor surfaces
without the need to change settings.
However some surfaces such as
delicate loose-pile rugs or carpets,
tasselled rug edges or damaged carpets
with exposed threads are not suitable
for cleaning with a rotary brush.
• The AirRam can still be used to clean
such surfaces by removing the brush
bar as shown on page 11 and 7 and
using the supplied plug in the brush bar
hole. This setting should also be used to
give the best performance on hard oors
with deep crevices
• The AirRam and Multi have a constantly
rotating brush bar. Never leave the
cleaning head in one spot for an
extended period of time as this may
damage the oor surface.
WARNING:
• Do not use water, solvents, or polishes
to clean the outside of the appliance;
wipe clean with a dry cloth.
• Never immerse the unit in water and do
not clean in a dish washer.
• Never use the appliance without the
lter tted.
• Ensure the battery is removed before
changing tools.
3
2859_System_TE_manual_update_aw.indd 3 31/05/2018 13:24
Thank you for choosing the Gtech AirRam and Multi.
“I started Gtech to create sensible, easy to use products, which do a great job. Your
opinion is important to us and we will use your feedback to improve our products and
services and let other people know what it’s like to be part of the Gtech family.”
Nick Grey – Inventor, Owner of Gtech
Please take the time to write a review of the Gtech AirRam and Multi by visiting
www.gtech.co.uk/product-reviews or if you didn’t purchase directly from Gtech please
leave a review with the retailer.
Make a note of both your product’s serial number codes for future reference. You
can nd them on the underside of the AirRam and the underside of the Multi once
the battery has been removed.
_ - _ _ - _ _ _ ~
_ _ _ _ _ ~
X-XX-XXX~
XXXXX~
WWYY~
00~0000000
_ _ _ _ ~
_ _ ~ _ _ _ _ _ _ _
What’s in the box
1
4
7
5
8
10
2
6
3
9
Head full assembly
1
Upper handle
2
Lower handle
3
Brush bar hole plug
4
4
Multi main unit
5
Power brush
6
Dusting brush
7
Crevice tool (stored inside the handle)
8
Extension tube
9
Charger (shared)
10
2859_System_TE_manual_update_aw.indd 4 31/05/2018 13:24
AirRam: Assembly
To attach the lower handle to the head
assembly, insert the metal pin on the lower
handle into the hole located on the pivot
yoke. Make sure the green locking clip is
pulled out to allow the lower handle to t.
The green locking clip, when correctly
tted, will click and hold the lower handle
in place. Should the handle assembly need
to be removed the clip can be pulled out to
unlock the lower handle.
The green locking clip remains permanently
attached to the head assembly.
Ensure the lower handle is sitting completely
ush against the yoke. Then push the green
locking clip into the back of the head.
Insert the upper handle into the lower
handle. You will need to press the button
on the upper handle to t it in.
Once it slides down you will hear it click
into place.
5
2859_System_TE_manual_update_aw.indd 5 31/05/2018 13:24
Storage
Upper Button
Lower Button
To stow or extend the upper handle simply
press the button on the lower handle to
unlock the upper handle.
The upper handle will now slide up or down
depending on required position.
Operation
Without pressing the power button, place
your foot on the left side of the AirRam
head and pull the handle back.
The upper handle can be set in two
positions: Lowered for storage and raised
for use. To lower the handle, release the
upper button. To raise the handle from the
stored position, release the lower button.
The power button is located on the left
hand side of the AirRam head assembly.
6
2859_System_TE_manual_update_aw.indd 6 31/05/2018 13:24
Press the power button with your foot to
turn the AirRam on.
Battery charging
To get the best performance on hard oors
with deep crevices, remove the brush bar
as shown on page 11. Insert the supplied
brush bar hole plug into the side of the head
assembly as shown in the image above.
When the state of charge indicator starts to
ash one green LED, recharge the battery.
The battery can be charged whilst it’s in the
AirRam, or when it’s off the product.
To remove the battery, squeeze the latch
underneath and pull upwards.
7
2859_System_TE_manual_update_aw.indd 7 31/05/2018 13:24
4
hours
1
hour
boost
Plug the charger into the mains and connect
it to the battery. Switch on at the mains.
The battery can be charged from at in
4 hours. The state of charge indicator
will show 4 solid green lights when it is
charged.
Replace the battery by sliding it down into
the head assembly. It will click into place.
It is OK to charge for 1 hour for a burst
of cleaning.
8
2859_System_TE_manual_update_aw.indd 8 31/05/2018 13:24
Loading...